1. Isingeniso Somkhiqizo

I-Handwheel Working Power Supply Voltage	DC24V / 1A
Amandla wokuthola amandla okuthola amandla	DC24V / 1A
I-Receiver Io Output Load Range	I-DC24V
Ubude be-Hand Wheel End Feme	10uhlobo
I-Receiver End Prece ubude	1uhlobo
I-Receiver ENT Network cable ubude ubude	3uhlobo
Ukushisa okusebenzayo	-25℃<X<55℃
Ukuphakama kwe-Anti-Fall	1uhlobo
Inani lenkinobho ngokwezifiso	6
Ubukhulu Bomkhiqizo	233*90.7*77.4(Mm)

4.Isingeniso somsebenzi wesingeniso

Incwajana:

Inkinobho Yezimo Eziphuthumayo:

Cindezela inkinobho yokumisa eziphuthumayo, Futhi amasethi amabili okuma okuma eziphuthumayo okuphumayo ku-owemukelayo azonqanyulwa, and all functions of the handwheel will be invalid.

Ngemuva kokukhipha isitobha esiphuthumayo, Ukukhishwa okuphuthumayo okuphuthumayo IO okuphumayo kuvaliwe, and all functions of the handwheel are restored.

② Isibuko ②:

6.2 Ubukhulu bokufaka

6.3 Ubukhulu bokufaka kwama-plugs endiza

6.4 I-Receiver Wiring Reference Diagram
7.Imiyalo yokusebenza komkhiqizo

1. Lapho umuntu owemukelayo enamandla futhi esebenza ngokukhanya kwesikhombisi sokwamukela, Xhuma owamukelayo kwikhompyutha ngentambo yenethiwekhi, Setha ikheli le-IP elinqunyelwe lekhompyutha, Futhi sebenzisa isoftware yokucushwa kwenethiwekhi ukusetha amapharamitha wenethiwekhi womsebenzi wesandla. Ngezindlela ezithile zokusetha, Bheka ku “I-LXWGP-ETS Wired Mand Wheary Manual”.

2.Ngemuva kokuthi kusungulwe lomukeli, Uhlelo ludinga ukuhlela uhlelo lwe-PLC. Sicela ubheke ku- “I-LXWGP-ETS ehlukene ama-Nokia Naturence Cort System Ukubeka Izindlela” and PLC program routine materials for details.

3.Ngemuva kokuqeda lezi zilungiselelo ezingenhla, Thatha owemukelayo kwikhabethe elikagesi lomshini bese ulifaka. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.

4.Ngemuva kokuqeda lezi zilungiselelo ezingenhla, Thatha owemukelayo kwikhabethe elikagesi lomshini bese ulifaka. Khipha ikhebula lenethiwekhi kwikhompyutha bese ulifaka kwi-X isikhombimsebenzisi sohlelo. Connect the receiver power supply and pulse line.

5. Khetha Ukukhetha Kwe-Axis: Switch the axis selection switch and select the axis you want to operate on.

6. Khetha Ukukhulisa: Switch the magnification switch and select the magnification level you need.

7. Ukuhambisa i-AXX: Cindezela ubambe inkinobho yokunika amandla, Khetha ukushintshwa kokukhethwa kwe-axisi, Khetha ukushintshwa kokukhulisa, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.

8. Cindezela ubambe noma iyiphi inkinobho yangokwezifiso ukuvula ukuphuma kwe-IO yenkinobho ehambisanayo ku-Outver, and release the button to turn off the output.

9. Cindezela inkinobho yokumisa eziphuthumayo, Ukukhishwa okuhambisanayo okuphuthumayo okuphumayo okuphumayo kwalowo owemukelayo kuzonqanyulwa, Umsebenzi wesandla uzokhutshazwa, Khipha inkinobho yokumisa eziphuthumayo, Ukukhishwa okuphuthumayo okuphumayo okuzovalwa, and the handwheel function will be restored.

8.Incazelo yemodeli yomkhiqizo

9.Ukudutshulwa kwenkinga yomkhiqizo

1.Isingeniso Somkhiqizo

2. Izici ezisebenzayo zomkhiqizo

3. Ukucaciswa komkhiqizo

Operating voltage and current of wireless remote	3V/14MA
Battery specifications	2 AA alkaline batteries, size 5
Low voltage alarm range of wireless remote	< 2.3V
Amandla wokuthola amandla okuthola amandla	DC5V-24V/A
Receiver emergency stop output load range	AC125V-1A/DC30V-2A
Receiver enable output load range	AC125V-1A/DC30V-2A
Receiver custom button output load range	DC24V/50mA
Receiver axis selection output load range	DC24V/50mA
Receiver magnification output load range	DC24V/50mA
Transmission power of handheld terminal	15dBm
Receiver receiving sensitivity	-100dBm
Wireless communication frequency	433MHz frequency band
Wireless communication distance	Barrier free distance of 40 amadesi
Operation temperature	-25℃ < X < 55℃
Anti fall height	1 (umshini)
Custom button quantity	2

4. Isingeniso somsebenzi wesingeniso

Amanothi:

① Pulse encoder:
Cindezela ubambe inkinobho yokunika amandla, Nyakazisa i-Encoder ye-Pulse, khipha isinali yokushayela,and control the movement ofthe machine axis.
② Enable button:
Press either enable button on either side, and the two sets of enable IO outputs on the receiver will conduct. Release the enable button to disconnect the enable IO output; And before switching the axis selection magnification and shaking the handwheel,the enable button needs to be held down to be effective; This function can be cancelled through configuration software.

③ Indicator lights:
Left side light: power on light,the handwheel uses the axis to select OFF for power on, and this light stays on after power on;
Middle light: a signal light that lights up when operating any function ofthe handwheel, and does not light up when there is no operation;
Right side light: Ukukhanya okuphansi kwe-alamu, low battery level,this lightflashes or stays on, battery needs to be replaced.

④ Emergency stop button:
Cindezela inkinobho yokumisa eziphuthumayo, Futhi amasethi amabili okuma okuma eziphuthumayo okuphumayo ku-owemukelayo azonqanyulwa, and all functions of the handwheel will be invalid.

⑤ Magnification switch:
Press and hold the enable button to switch the magnification switch, which can switch the magnification controlled by the handwheel.

⑥ Axis selection switch (ukushintshwa kwamandla):
Press and hold the enable button to switch the axis selection switch, which can switch the movement axis controlled by the handwheel. Switch this switch from OFF to any axis and turn on the handwheel power.

⑦ Custom button:
Two custom buttons, each corresponding to an IO output point on the receiver.

5. Umdwebo wesengezo somkhiqizo

6. Umhlahlandlela Wokufakwa Komkhiqizo
6.1 Izinyathelo Zokufaka Umkhiqizo

1. Faka ukwamukela kwikhabhinethi kagesi ngebhande ngemuva, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Bheka umdwebo wethu we-wiring owemukelayo bese uyiqhathanisa nemishini yakho esendaweni. Connect the equipment to the receiver via cables.
3.After the receiver is properly fixed, I-antenna ifakwe owemukelayo kumele axhunywe, and the outer end of the antenna should be installed or placed outside the electrical cabinet. Kunconywa ukuyibeka phezulu kwekhabethe kagesi ngomphumela omuhle kakhulu wesiginali. It is prohibited to leave the antenna unconnected or place it inside the electrical cabinet, as this may result in the signal being unusable.
4. Ekugcineni, turn on the power switch of the handwheel, and you can operate the machine remotely using the handwheel.

6.2 Ubukhulu bokufaka

6.3 I-Receiver Wiring Reference Diagram

7. Imiyalo yokusebenza komkhiqizo
1. Power on the machine and the receiver. The receiver’s working indicator light flashes. Install the battery in the wireless electronic handwheel, secure the battery cover, na-
turn on the power switch of the wireless electronic handwheel. The handwheel’s battery level indicator light is on.
2. Khetha i-axis yokuxhumanisa: Cindezela ubambe inkinobho yokunika amandla, toggle the axis selection switch, and select the axis you want to operate.
3. Khetha Ukukhulisa: Cindezela ubambe inkinobho yokunika amandla, toggle the magnification switch,and select the desired magnification level.
4. Ukuhambisa i-AXX: Cindezela ubambe inkinobho yokunika amandla, Khetha ukushintshwa kokukhethwa kwe-axisi, Khetha ukushintshwa kokukhulisa, and then rotate the pulse encoder. Rotate clockwise to move the
positive axis and counterclockwise to move the negative axis.
5. Cindezela ubambe noma iyiphi inkinobho yangokwezifiso, and the corresponding button IO output of the receiver will be turned on. Release the button, and the output will be turned off.
6. Cindezela inkinobho yokumisa eziphuthumayo, Ukukhishwa okuhambisanayo okuphuthumayo okuphumayo okuphumayo kwalowo owemukelayo kuzonqanyulwa, Umsebenzi wesandla uzokhutshazwa,Khipha inkinobho yokumisa eziphuthumayo, Ukukhishwa okuphuthumayo okuphumayo okuzovalwa, and the handwheel function will be restored.
7. Uma isandla sesandla singasebenzi isikhathi esithile, it will automatically enter sleep mode to reduce power consumption. Lapho isetshenziswa futhi, the handwheel can be activated by pressing the enable button.
8. Uma isandla sesandla asisetshenziswa isikhathi eside, it is recommended to switch the handwheel shaft to the OFF position, cisha amandla esandla, and extend the battery life.

8. Incazelo yemodeli yomkhiqizo

① :ZTWGP represents the appearance style
②：Amapharamitha okukhishwa kwe-Pulse:
01: Indicates that the pulse output signal is A, B; I-Pulse Voltage 5v; pulse quantity 100PPR.
02：Indicating thatthe pulse output signals are A and B; Pulse voltage 12V; pulse quantity 100PPR.
03：Indicating thatthe pulse output signals are A, B, A -, B -; I-Pulse Voltage 5v; pulse quantity 100PPR.
04：Kukhombisa okukhishwe okuphezulu kwe-NPN okuvulekile kwe-NPN, ngezimpawu zokuphuma ze-pulse ze-a no b;The number of pulses is 100PPR.
05：Kubonisa okuphumayo kwe-PNP ye-PNP, ngezimpawu zokuphuma ze-pulse ze-a no b; The number of pulses is 100PPR.
③：Representing the number of axis selection switches, 2 imele 2 axes.
④：Represents the type of axis selection switch signal, Isiginali yokuphuma ekhomba iphuzu, and B represents encoded output signal.
⑤：Represents the type of multiplication switch signal, Isiginali yokuphuma ekhomba iphuzu, and B represents encoded output signal.
⑥：Represents the number of custom buttons, 2 imele 2 custom buttons.
⑦：Represents the power supply for the system handwheel, na- 05 represents 5V power supply.
⑧：L represents the left column (left knife holder), and R represents the right column (right knife holder).

9.Solution to Product Malfunctions

1.Isingeniso Somkhiqizo

Kusetshenziselwa i-handwheel ye-wireless electronic kusetshenziselwa ukuholwa yincwadi, ukubeka isikhundla, ukuhambisana kwamathuluzi,neminye imisebenzi kumathuluzi womshini we-CNC. Lo mkhiqizo wamukela ubuchwepheshe bokuhambisa okungenantambo, Ukuqeda uxhumano lwentambo yendabuko yentwasahlobo, Ukunciphisa ukwehluleka kwemishini okubangelwa yizintambo, eliminating the disadvantages of cable dragging and oil stains, nokwenza ukusebenza kube lula ngokwengeziwe. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,ukukhunyusisa, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.

2. Izici zomkhiqizo
1. Akwamukela ubuchwepheshe bokuxhumana okungenantambo abangama-433mhz, Ibanga elingenantambo le-Wireless 40 amadesi;
2. Adopt authomathokhi funteenchling umsebenzi we-hopping, umsebenzi 32 sets of wireless remote controllers at the same time without affecting each other;
3. Sekela inkinobho yokumisa eziphuthumayo, Shintsha ukuphuma kwesiginali ye-IO, connected to the system through IO wiring;
4. Singatha 4 izinkinobho ngokwezifiso, switch IO signal, output signal to the system through IO-LINK protocol;
5. Support quick movement button + and button -, press and hold the button to replace the handwheel to move the machine;
6. Sekela Ukulawulwa Kwe-6-axis, switch IO signal, output signal to the system through IO-LINK protocol;
7. Support 1X,10x, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Sekela i-Pulse Encoder, 100 pulses/circle, Finyelela isikhombimsebenzisi esibonakalayo se-MPG ngokukhipha isiginali encodi e-AB;

3.Ukucaciswa komkhiqizo

4.Izici zomkhiqizo

Amanothi:
Inkinobho yokumisa inhloko:
Cindezela inkinobho yokumisa eziphuthumayo, Imiphumela emibili yokumisa izimo eziphuthumayo ye-IO etholwayo iyanqanyulwa, Futhi yonke imisebenzi yakwaWhehli avumelekile.Emva kokuma okuphuthumayo kukhishwa, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

Isibonisi se-②Screen:

Izinkinobho ze-③Custom:
4 izinkinobho ngokwezifiso, inkinobho ngayinye ihambelana ne-IO Output Point kulowo owamukelayo, Ixhunywe ohlelweni nge-Iolink. Ngokujwayelekile, the ~ button is set as a high-speed button.
Ukushintsha kokukhethwa kwe-④axis:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
Izinkinobho ze-⑤Shortcut:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Cindezela ubambe inkinobho yokunika amandla bese unikine i-Encoder ye-Pulse ukuthumela ishayela
signal to control the movement of the machine axis.
⑨Power switch:
Handwheel power button.

5.Umdwebo Wezesekeli Yomkhiqizo

6.Umhlahlandlela Wokufakwa Komkhiqizo

6.1 Izinyathelo Zokufaka Umkhiqizo

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Bheka umdwebo wethu we-wiring owemukelayo, Qhathanisa nemishini yakho esendaweni, bese uxhuma
the equipment to the receiver via cables.
3. Ngemuva kokuthi owemukelayo elungisiwe, I-antenna ifakwe owemukelayo kumele axhunywe,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
Kunconywa ukuyibeka phezulu kwekhabethe kagesi ngomphumela omuhle kakhulu wesiginali. Yona
anqatshelwe ukushiya i-antenna engaxhunyiwe noma abeke i-antenna ngaphakathi kwekhabethe likagesi,
which may cause the signal to be unusable.
4.Ekugcineni, Vula i-Manzi Shintra Power futhi ungasebenza umshini ngo
handwheel remote control.

6.2 Ubukhulu bokufaka

6.3 I-Receiver Wiring Reference Diagram

7. Ukulungiswa nokunakekelwa

1. Sicela uyisebenzise endaweni eyomile enamazinga okushisa ajwayelekile nengcindezi yokwelula
Impilo Yenkonzo;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
Impilo Yenkonzo;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Sicela ugweme ukuncipha, ukuwa, lapho kuqhuma, njll. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. Uma kungasetshenziswanga isikhathi eside, Sicela ugcine i-handwheel endaweni ehlanzekile nephephile;
6. Pay attention to moisture and shock during storage and transportation.

8. Security Information

1. Sicela ufunde imiyalo ngokucophelela ngaphambi kokusebenzisa. Ochwepheshe abavunyelwe anqatshelwe
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. Uma ukulungiswa kudingeka, Sicela uxhumane nomenzi. Uma umonakalo ubangelwa ukuzilungisa,
the manufacturer will not provide warranty.

1.Ukwethulwa kokulawula okukude

A.Product comiphik
I-Nokia real-time coodigneise Shond Wireless Electronic Handwwheel iqukethe izingxenye ezimbili: I-Electronic handwwheel kagesi + owemukelayo;

B.Charoctistints

*6 izinkinobho ngokwezifiso zingalawula 6 shintsha okuphumayo;
*Isikrini sokubonisa sibonisa inani lokuhlanganisa irejista elihambisanayo le-PLC ngesikhathi sangempela, and supports 6-axis display of real-time coordinates.

2.Inkambu yesicelo

1) I-elekthronikhi handwwheel ixhumeke ku-PLC nge-Ethernet Receiver

A.Isandla esidlulisa idatha esemqoka ngaphandle kwentambo kwamukeli, Futhi owamukelayo ubhala okhiye nge-Network Cable PLC System Area; Otholayo ufunda imininingwane ezokhonjiswa endaweni ekhethiwe ye-DB, bese ibuyisa imininingwane esikrinini sokubonisa esiseduze. Umsebenzisi angenza ngokwezifiso ikheli lesisekelo lokufunda nokubhala indawo ye-DB e-handwheel, so that the handwheel can read and write the data in the DB area of the PLC.

b. Owemukelayo asekela umthethonqubo we-Motoron S7. Kusebenza ku-PLC S7-200, PLC S7-300 and PLC S7-1200.

c. The user can configure the receiver to server mode and client mode through the PLC connection configuration tool.

Kumodi yeseva, Umsebenzisi ulungiselela i-PLC Funda futhi ubhale ikheli nge-Software Yokucushwa kwe-WGP-ETS;Sebenzisa ithuluzi lokucushwa kwe-PLC ukumisa ukwamukela kwimodi yekhasimende. Ngemuva kokucushwa, the XWGP-ETS receiver can communicate with the PLC through the standard S7 protocol.

2)Isicelo esithile

Ukusetshenziswa okukhethekile komukeli wezandla kanye ne-Nokia PLC S7-200:

a. Inkinobho e-handweel ihambelana nenani lendawo ye-bool ebekwe ngumsebenzisi ku-PLC. Uma inkinobho yesandla icindezelwa, Indawo ehambisanayo ye-bool iyiqiniso, futhi lapho ikhishwa, Kungamanga, futhi ikheli lesisekelo lendawo ye-bool lingasetwa nge-handwheel;

b. Isandla sikwazi ukufunda inani lendawo ye-DB ku-PLC. I-axis eyodwa inayo 4 ama-byte wedatha yokubonisa, na- 6 izimbazo zinezonke 24 ama-byte. The base address of the DB area can be set through the WGP-ETS configuration software.

4.Isingeniso Sokubukeka

5.Incazelo ye-terminal ebulalayo netafula lokufaka amakhodi

6.Usayizi wokubukeka