FANUC dedicated wireless electronic handwheel

መግለጫ

1.የምርት መግቢያ

Wireless electronic handwheel is used for manual guidance, አቀማመጥ, tool alignment,and other operations on CNC machine tools. ይህ ምርት ገመድ አልባ የማስተላለፍ ቴክኖሎጂን ይደግፋል, eliminating the traditional spring wire connection, በኬብሎች ምክንያት የመሳሪያ ውድቀቶችን መቀነስ, eliminating the disadvantages of cable dragging and oil stains, and making operation more convenient. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,magnification, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.

2. የምርት ባህሪዎች
1. 433mhz ሽቦ አልባ የግንኙነት ቴክኖሎጂን ይቀበሉ, ገመድ አልባ አሠራር ርቀት ነው 40 ሜትር;
2. አውቶማቲክ ድግግሞሽ የመደናገጥ ተግባር, መጠቀም 32 sets of wireless remote controllers at the same time without affecting each other;
3. የአደጋ ጊዜ ማቆሚያ ቁልፍን ይደግፉ, የ ioy የምልክት ውፅዓት ቀይር, connected to the system through IO wiring;
4. ድጋፍ 4 ብጁ አዝራሮች, switch IO signal, output signal to the system through IO-LINK protocol;
5. Support quick movement button + and button -, press and hold the button to replace the handwheel to move the machine;
6. 6-የአክስ ቁጥጥር ይደግፉ, switch IO signal, output signal to the system through IO-LINK protocol;
7. Support 1X,10x, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;

3.Product Specifications

4.Product Features

ማስታወሻዎች:
①Emergency stop button:
የአደጋ ጊዜ ማቆሚያ ቁልፍን ይጫኑ, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Screen display:

③Custom Buttons:
4 ብጁ አዝራሮች, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Press and hold the enable button and shake the pulse encoder to send out a pulse
signal to control the movement of the machine axis.
⑨Power switch:
Handwheel power button.

5.የምርት መለዋወጫዎች ሥዕላዊ መግለጫዎች

6.የምርት መጫኛ መመሪያ

6.1 የምርት ጭነት ደረጃዎች

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.የእኛ ተቀባዩ የሽቦ ንድፍን ይመልከቱ, compare it with your on-site equipment, and connect
the equipment to the receiver via cables.
3. ተቀባዩ ከተስተካከለ በኋላ, ተቀባዩ የተስተካከለ አንቴና ተገናኝቷል,
እና የአንቴሪ ውጫዊ መጨረሻ መጫን ወይም ከኤሌክትሪክ ካቢኔ ውጭ መቀመጥ አለበት.
ለበለጠ የምልክት ውጤት በኤሌክትሪክ ካቢኔ አናት ላይ እንዲያስቀምጠው ይመከራል. It
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
which may cause the signal to be unusable.
4.በመጨረሻ, turn on the handwheel power switch and you can operate the machine by
handwheel remote control.

6.2 የመቀበያ ጭነት መጠባበቂያ ልኬቶች

6.3 የተቀባዩ የሽቦ ንድፍ ንድፍ

7. Maintenance and care

1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
the service life;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. እባክዎን እንዳይጨርሱ ያድርጉ, መውደቅ, ማደንዘዝ, ወዘተ. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. ለረጅም ጊዜ ጥቅም ላይ የማይውል ከሆነ, እባክዎን የእጅዎን ንፁህ እና ደህንነቱ በተጠበቀ ቦታ ያከማቹ;
6. Pay attention to moisture and shock during storage and transportation.

8. Security Information

1. Please read the instructions carefully before use. Non-professionals are prohibited from
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. ጥገና ከተጠየቀ, እባክዎን አምራቹን ያነጋግሩ. If the damage is caused by self-repair,
አምራቹ የዋስትና ማረጋገጫ አይሰጥም.