1. 12 أزرار, 6 of which support I/O signals.
2. Supports 2.8-inch color screen display.
3. Supports one 9-level axis selector switch, supporting up to 6-axis output.
4. Supports one 3-level multiplier switch.
جهاز تحكم عن بعد لاسلكي للقطع بالليزر ثلاثي الأبعاد خماسي المحاور：PHB06B-ليزر
وصف
1.مقدمة المنتج
The PHB06B-Laser enables wireless remote control operation of the CNC system via the Modbus TCP protocol, يدعم 12 أزرار, and supports real-time display of system coordinates and status.
2.ميزات المنتج
1. 12 أزرار, 6 of which support I/O signals.
2. Supports 2.8-inch color screen display.
3. Supports one 9-level axis selector switch, supporting up to 6-axis output.
4. Supports one 3-level multiplier switch.
5. Supports one electronic remote control, 100 pulses/revolution.
6. Supports receiver Ethernet interface, Modbus TCP communication.
7. Supports standard Type-C charging, 5مواصفات شحن V-2A, built-in battery specifications 18650/12775mWh.
3.مبدأ العمل
PHB06B-Laser is connected to the user’s system via an Ethernet interface. It performs data interaction through the Modbus TCP protocol. The user system acts as the Modbus master station, which can transmit real-time system display coordinates and read information such as keys and axis selection of the PHB06B-Laser remote control, so as to realize real-time data communication.
ملحوظة: For the specific protocol, please refer to the “3D 5-axis Laser Cutting – PHB06B – Laser – Modbus Protocol Description”.
4.مواصفات المنتج
| جهد إمدادات طاقة المتلقي | DC5V-DC24V |
| Button lifespan | 1,000,000 مرات |
| Operating Temperature |
-25℃ < X < 55℃
|
| Safe drop height | 1 م |
| Receiver port | إيثرنت |
| Number of buttons |
12
|
| شاشة عرض |
2.8-inch color screen
|
| wireless communication frequency | 433MHz band |
| Receiver sensitivity |
-100DBM
|
| Handheld transmit power |
15DBM
|
| مسافة الاتصال اللاسلكية | 100 meters barrier-free range |
| Rechargeable Battery Specification | Rechargeable Battery Specification |
| Charging base power supply voltage | تيار مستمر 24 فولت/1 أمبير |
|
Wired Charging Specification
|
Type-C charging port, DC 5V/2A |
5.مقدمة وظيفة المنتج
ملحوظات:
① Power Switch
Used to turn the remote control on and off.
② Enable buttons on both sides
The enable button must be pressed while holding the remote control.
③Button area
12 أزرار
④ Axis Selection and Magnification Switch
One 9-gear axis selection switch; one 3-gear magnification switch.
⑤ Emergency Stop Switch
Remote control emergency stop switch.
⑥ Display Screen Area
It can display coordinates, status and other information.
⑦ Electronic Pulse Encoder
One electronic pulse encoder with 100 نبضات لكل ثورة.
⑧ Type-C Charging Port
It is used for connection between the charger and the remote control.
The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key
6. Product Accessories Diagram
7. Receiver and Wiring Ports
8. Configure network access
9. Test Instructions
10. Installation dimensions
أبعاد تثبيت المتلقي
وحدة: millimeters
Thickness: 29.6mm
11.Maintenance and upkeep
1. يرجى استخدامه في بيئة جافة في درجة حرارة الغرفة والضغط لتمديد عمر خدمتها.
2. Do not use sharp objects to contact the button area to extend button life.
3. Please keep the appearance of the remote control clean to extend its service life.
4. Please avoid crushing, dropping, or bumping, إلخ. to prevent damage to the precision components
5. Avoid moisture and shock during storage and transportation.
12.معلومات السلامة
1. يرجى قراءة التعليمات بعناية قبل الاستخدام وحظر غير المحترفين من العمل.
2. If you repair it yourself and cause damage, the warranty will be void.
