Васиф
1.Продукт Инеш
The PHB06B-Laser enables wireless remote control operation of the CNC system via the Modbus TCP protocol, ярҙам итә 12 төймәләре, and supports real-time display of system coordinates and status.
2.Продукт функциялары
1. 12 төймәләре, 6 улар араһында индереү-сығарыу сигналдарын ярҙам итә.
2. 2,8 дюймлы төҫлө экран дисплейын ҡабул итә.
3. кимәлдәге бер күсәр һайлаусы коммутаторҙы ярҙам итә, 6-үҙәк сығышҡа тиклем ярҙам итә.
4. 3-кимәлле бер множитель коммутаторын ярҙам итә.
5. Supports one electronic remote control, 100 pulses/revolution.
6. Supports receiver Ethernet interface, Modbus TCP communication.
7. Supports standard Type-C charging, 5V-2A зарядка спецификацияһы, built-in battery specifications 18650/12775mWh.
3.Эш принцибы
PHB06B-Laser is connected to the user’s system via an Ethernet interface. It performs data interaction through the Modbus TCP protocol. The user system acts as the Modbus master station, which can transmit real-time system display coordinates and read information such as keys and axis selection of the PHB06B-Laser remote control, so as to realize real-time data communication.
Иғтибар итергә: For the specific protocol, please refer to the “3D 5-axis Laser Cutting – PHB06B – Laser – Modbus Protocol Description”.
4.Тауар характеристикалары
| Ҡабул итеүсе энергия менән тәьмин итеү көсөргәнеше |
DC5V-DC24V |
| Button lifespan |
1,000,000 тапҡыр . |
| Operating Temperature |
-251. < X < 551.
|
| Safe drop height |
1 м |
| Receiver port |
Ethernet |
| Number of buttons |
12
|
| Дисплей экраны |
2.8-inch color screen
|
| wireless communication frequency |
433MHz band |
| Receiver sensitivity |
-100дБм
|
| Handheld transmit power |
15дБм
|
| Сымһыҙ аралашыу арауығы |
100 meters barrier-free range |
| Rechargeable Battery Specification |
Rechargeable Battery Specification |
| Charging base power supply voltage |
DC24V/1А |
|
Wired Charging Specification
|
Type-C charging port, DC 5V/2A |
5.Продукт функцияһы Инеш
Иҫкәрмәләр:
① Power Switch
Used to turn the remote control on and off.
② Enable buttons on both sides
The enable button must be pressed while holding the remote control.
③Button area
12 төймәләре
④ Axis Selection and Magnification Switch
One 9-gear axis selection switch; one 3-gear magnification switch.
⑤ Emergency Stop Switch
Remote control emergency stop switch.
⑥ Display Screen Area
It can display coordinates, status and other information.
⑦ Electronic Pulse Encoder
One electronic pulse encoder with 100 бер революция импульстары.
⑧ Type-C Charging Port
It is used for connection between the charger and the remote control.
The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key
6. Product Accessories Diagram
7. Receiver and Wiring Ports
8. Configure network access
10. Installation dimensions
Ҡабул итеүсе ҡуйыу үлсәмдәре
Берәмек: millimeters
Thickness: 29.6mm
11.Maintenance and upkeep
1. Зинһар, уны ҡулланыу өсөн ҡоро мөхиттә бүлмә температураһында һәм баҫым, уның хеҙмәт итеү ваҡытын оҙайтыу өсөн.
2. Do not use sharp objects to contact the button area to extend button life.
3. Please keep the appearance of the remote control clean to extend its service life.
4. Please avoid crushing, dropping, or bumping, һ. б.. to prevent damage to the precision components
5. Avoid moisture and shock during storage and transportation.
12.Хәүефһеҙлек тураһында мәғлүмәт
1. Зинһар, күрһәтмәләрҙе иғтибар менән уҡығыҙ, ҡулланыр алдынан һәм профессионалдар булмаған эшләүҙе тыйығыҙ.
2. If you repair it yourself and cause damage, the warranty will be void.
