1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 metro.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, Pagpili sa Axis, magnification, and other information.
3. Suporta sa Emergency Stop button, I-switch ang IO Signal Output, and the hand wheel shutdown emergency stop is still valid.
4. Nagsuporta 6 Mga batasan nga butones, switch IO signals, and can output signals to the system through IO wiring or communication.
Wired electronic handwheel Instruction Manual
Hulagway
1. Pasiuna
Electronic handwheel is used for manual guidance, posisyon, tool alignment, and other operations on CNC machine tools. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, magnification, buttons, andother signals through communication.
2.Mga Features nga Function sa Produkto
1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 metro.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, Pagpili sa Axis, magnification, and other information.
3. Suporta sa Emergency Stop button, I-switch ang IO Signal Output, and the hand wheel shutdown emergency stop is still valid.
4. Nagsuporta 6 Mga batasan nga butones, switch IO signals, and can output signals to the system through IO wiring or communication.
5. Nagsuporta 6 o 8 Kontrol sa Axis, with switch IO signals that can be output to the system through IO wiring or communication.
6. Nagsuporta 3 o 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Support pulse encoder, 100 pulses/turn, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.
3. Mga detalye sa produkto
| Handwheel working power supply voltage | DC24V/1A |
| Madawat nga Koleksyon sa Gahum sa Pagdumala | DC24V/1A |
| Receiver IO output load range | DC24V |
| Hand wheel end cable length | 10m |
| Receiver end cable length | 1m |
| Receiver end network cable length | 3m |
| Operating temperature | -25℃<X<55℃ |
| Anti-fall height | 1m |
| Custom Button Quantity | 6 |
| Product dimensions | 233*90.7*77.4（mm） |
4.Product function introduction
Kwarta:
Emergency stop button:
Pindota ang button sa STOP sa Emergency, ug ang duha ka hugpong sa mga emergency stop Io output sa tigdawat pag-disconnect, ug ang tanan nga mga function sa handwheel mahimong dili husto.
After releasing the emergency stop, the emergency stop IO output on the receiver is closed, and all functions of the handwheel are restored.
② Screen display:
PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 Mga batasan nga butones, Ang matag usa nga katumbas sa usa ka IO output point sa tigdawat, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Padayon ug kupti ang magamit nga butones, Pag-uyog sa pulso encoder, Pagpagawas sa usa ka signal sa pulso, and control the movement of the machine axis.
⑧ Handwheel cable:
Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.
5. Diagram sa accessory sa produkto
6. Giya sa Pag-install sa Produkto
6.1 Mga lakang sa pag-install sa produkto
6.1 Mga lakang sa pag-install sa produkto
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Tan-awa ang among Diagram sa Kwaresidad sa Pagdawat ug itandi kini sa imong mga kagamitan sa site. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. Pagkahuman sa pag-ayo sa tigdawat, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.
6.2 Mga Dimensyon sa Pag-instalar sa Pagdawat
6.3 Installation dimensions of aviation plugs
6.4 Diagram sa Reacrer Wiring Discrence
7.Product Operation Instructions
7.Product Operation Instructions
1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.
2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.
3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.
4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Pilia ang Kadaghan: Switch the magnification switch and select the magnification level you need.
7. Pagbalhin Axis: Padayon ug kupti ang magamit nga butones, Pilia ang Switch sa Pagpili sa Axis, Pilia ang Switfication Switch, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Pindota ang button sa STOP sa Emergency, Ang katugbang nga emergency stop IO output sa tigdawat pag-disconnect, Ang function sa handwheel mahimong baldado, buhian ang button sa Emergency Ont, Ang Emergency Stop Io output sirado, ug ang gulay nga gimbuhaton ipahiuli.
8.Deskripsyon sa modelo sa produkto
① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : represents the number of axis selection switches, represents axes, and represents
atso.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, ug b nagrepresentar sa gi-encode nga output signal.
9.Product trouble shooting
10.Pag-alima
1. Palihug gamita kini sa usa ka uga nga palibot sa temperatura sa kwarto ug presyur aron mapalapdan ang kinabuhi sa serbisyo niini.
2. Palihug likayi ang paggamit sa dili normal nga palibot sama sa mga bula sa ulan ug tubig aron mapalapdan ang kinabuhi sa serbisyo.
3. Palihug hupti nga limpyo ang dagway sa handwheel aron mapalapdan ang kinabuhi sa serbisyo niini.
4. Palihug likayi ang pagpuga, pagkahulog, mosapon, ug uban pa. Aron malikayan ang kadaot sa mga sangkap sa katukma sa sulod sa handwheel o mga kasaypanan sa katukma.
5. Kung dili gigamit sa dugay nga panahon, please store the handwheel in a clean and safe place.During storage and transportation, Ang atensyon kinahanglan ibayad sa kaumog ug pagbatok sa shock.
11. Impormasyon sa Kaluwas
1. Palihug basaha og maayo ang mga panudlo sa wala pa gamiton ug gidili ang mga dili propesyonal gikan sa pag-operate.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Kung ang pag-ayo gikinahanglan, Palihug kontaka ang tiggama. Kung ang kadaot gipahinabo sa pag-ayo sa kaugalingon, Ang tiggama dili maghatag garantiya
