Roti neri BWGP
Modellu di u produttu
Mudellu: DH12S-LD
Equipamentu applicabile:crawler wire saw machine
Diagramma di i prudutti di u produttu
Nota: Pudete sceglie una di e trè antenne. L'antenna di a Copia di Asciughe hè standard per default.
Descrizione di l'interruttore di telecomando
Displaycontent introduction
Large motor speed：S1：0-50
Small motor speed: S2: 0-50
Maximumspeedlimitofautomatic cuttingsmallmotor:F:0-30(parametersadjustable)
Automatic cutting maximum current: Ic: 0-35 (parameters adjustable)
Linear correction value: Df: -99-99 (1 unit is about 0.02V)
Tovaghja bassa: A bateria di cuntrollu remota hè troppu bassa, Per piacè rimpiazzà a bateria.
Rete abbandunata: U segnu wireless hè interrottu. Verificate u putere di u ricevitore, putenza di novu, è riavvia u cuntrollu remoto.
Istruzzioni di operazione di funzione di cuntrollu remoto
1.Turn on the remote control
When the is powered on, the RF-LED light on the receiver starts to flash;install two AA batteries in threceiver e remote control, accende u switch di u putere, andthe display will show the motor speed, indicando startup di successu.
2.Large motor and speed regulation
Turn the “forward/reverse” switch to forward, the receiver’s large motor will turn on, and the display will show forward
Turn the “forward/reverse” switch to reverse, the large motor of the receiver will turn on in reverse, and the display will show reverse
Rotate the “large motor speed adjustment” pomu per aghjustà u grande tensione di u mutore di u mutore di u mutore di u mutore di u mutore 0-10V;
3.Picculu Regulamentu è Regule di Velocità
Move u “forward/reverse” switch to forward, A rota di a manca è di a rota diritta avanti di u ricevitore sò attivati, è u display mostra avanti
Turn the “Avanti / reverse” switch to reverse, A rota di a rota di a rota sinistra è a rota diritta di u ricevitore sò attivati, è a visualizazione mostra inversa
4.Gira a sinistra è a diritta
Turn the “Lasciatu / Right” Cambia à manca, A rota diritta di u destinatariu avarà avanti è accende,è a visualizazione mostrarà à manca
Turn the “gira a manca / diritta” Cambia per girà a diritta, a rota sinistra di u destinatariu hà da avvicinà è accende, è a visualizazione si mustrà à a volta
5.Girà in u locu
In modu manuale:
Gira a sinistra in u locu: Pulse è tene u “Attivabile” BOTTON, gira u “U turnu left / right” Cambia à manca, A rota sinistra è a rota diritta in avanti di u ricevitore sò attivati,and start turning left in place;
Turn right in place: Pulse è tene u “Attivabile” BOTTON, gira u “U turnu left / right” switch to right, the left wheel forward and right wheel reverse of the receiver are turned on, and the receiver starts to turn right in place;
6.Small motor speed limit adjustment
In automatic mode: press and hold the “Attivabile” button and rotate the “Small Motor Speed Adjustment” to adjust the maximum speed of the small motor during automatic cutting;
7.Automatic cutting
The first step is to start the big motor; the second step is to switch the mode switch to “Auto”; the third step is to start the small motor and the screen will display “Cutting Auto”,indicating that it has entered the automatic cutting mode;
8. Straight line correction
When the left and right walking motors are moving forward and backward, the left and right speeds are inconsistent, and the straight-line walking deviates. You can use the linear correction function of the remote control to fine-tune the speed of the left and right wheels;
Correction principle: Through the correction function, the speed of the left wheel is fine-tuned to reach the same speed as the right wheel, so as to synchronize the speed of the left and right wheels and eliminate the deviation;
Deviation correction operation method: In modu manuale, press and hold the “Attivabile” button and rotate the “Small Motor Speed Regulation”;
Rotate clockwise to increase the left wheel speed voltage and the correction value on the display screen will increase;
Rotate counterclockwise to reduce the left wheel speed voltage and the display correction value to decrease;
Correction range: Correction value -90 à 90; correction voltage of one correction unit is about 0.02V;
9. Parameter menu (users are prohibited from modifying it without permission)
Alcune funzioni di u cuntrollu remota pò esse aghjustatu attraversu i paràmetri. In modu manuale, when the small motor speed S2 is 10, push the forward/reverse switch up three times in a row, and then push it down three times in a row to enter the parameter menu;
Esci da u menu di parametru: sceglite di salvà o micca salvà, then press the enable button to confirm the exit;
Maximum current: the operating rated current of the cutting motor is 80% of this currentt;
Speed control parameters: automatic cutting control parameters, default 800, modification is prohibited;
Deceleration parameter: automatic cutting control parameter. When the cutting current change value exceeds this value,deceleration begins.
Acceleration a1: automatic cutting control parameter, when the cutting current is lower than the set cutting current, the speed of acceleration;
Deceleration a2: automatic cutting control parameter, when the cutting current is higher than the set
cutting current, the speed of deceleration;
Automatic knife retraction: invalid;
Start self-locking: 0, no self-locking; 1, self-locking. Press the enable key + forward and reverse to take effect and self-lock.
Maximum walking: the maximum speed of the small motor.
Cutting current: set the maximum current of the main motor for automatic cutting. If the feedback current exceeds this value, it will start to decelerate.
Default speed limit: the default maximum speed of automatic cutting speed when turning on the machine.
Automatic mode: 0, the automatic switch is automatically controlled; 1, the automatic switch controls the automatic IO output point.
Speed limit offset: the maximum speed of the small motor during automatic cutting.
Maximum host: maximum speed of large motor.
Caratteristiche elettrici remoti
Dimensione di cuntrollu remoto
L'interpretazione finale ghjustu di stu pruduttu appartene solu à a nostra cumpagnia.
