tööstuslik kaugjuhtimispult:used for various industrial equipment
1.Maximum 26 relay outputs.
2.Takistusteta edastuskaugus on 200 meetrit.
3. Maximum 4 channels of analog 0-10V output (display range can be customized): supports 2 channels of extended isolated digital potentiometer output;
4. 2 analog inputs; and displayed on the remote control, the display range can be customized.
5. 1 emergency stop relay output normally closed contact.
Mudel: DH01R-4W-26K
Applicable equipment:various industrial equipment
Märge: You can choose one of the three antennas. The suction cup antenna is standard by default.
Märge:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, see tähendab ilma hädaseiskamisväljundita.
②Kui analoogväljund puudub, 0W või 0R pole vaja märkust teha; analoogid W1, W2, W3, ja W4 vaikimisi 0–10 V analoogpinge väljund; samal ajal, W1 ja W2 saab laiendada 2 isoleeritud digitaalse potentsiomeetri väljundid, hulgaga 0 -5K oomi, ½ vatti; resolutsioon: 20 oomi. Neid kahte digitaalset potentsiaali saab kasutada keevitusmasina keevitusvoolu ja keevituspinge juhtimiseks. Kui on vaja digitaalset potentsiomeetri väljundit, kasutaja märkmed on vajalikud.
④Analoogsisend, ulatudes alates 1 juurde 2, indicating that there are 1 juurde 2 analog inputs(maximum 2 kanalid); when there is an analog input, you need to note the voltage range of the analog input (our receiver defaults to 0 -5V, the user can also note as 4-20 mA or 0-10V, jne.) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)
These two analog quantities can be used as displays for welding current and welding voltage.
1）Maximum 26 relay outputs;
2）Maximum 4 channels of analog 0-10V output (display range can be customized): supports 2 channels of extended isolated digital potentiometer output;
3）2 analog inputs; and displayed on the remote control, the display range can be customized
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 AA patareid, low power consumption design;
6） Wireless operation distance is 200 meetrit;
7）Protection grade IP67;
8）With cross switch operation, supports two 4-direction cross switches;
9）Back strap design.
W1 knob value: W1: 0-1000 (parameter adjustable 0-9999)
W2 knob value: W2: 0-5000 (parameter adjustable 0-9999)
W3 knob value: W3: 0-5000 (parameter adjustable 0-9999)
W4 knob value: W4: 0-5000 (parameter adjustable 0-9999)
ADC1 feedback display: 0-1000 (parameter adjustable 0-5000)
ADC2 feedback display: 0-1000 (parameter adjustable 0-5000)
Low voltage: The remote control battery is too low, please replace the battery.
Network dropped: The wireless signal is interrupted. Please check the power of the receiver, power it on again, and restart the remote control.
1） Turn on the remote control
When the receiver is powered on, the receiver working indicator flashes; install two AA batteries in the remote control, turn on the power switch, and the display shows a value,indicating successful startup. The receiver working indicator light becomes solid.
2）Switch and button functions
Any operation of the twist switch and button on the remote control can control the corresponding switch signal output point on the receiver. All switch signal output points on the receiver are normally open signals by default;
3）W1-W4 speed adjustment
Pöörake W1-W4 nuppe suvaliselt, et kasutada vastuvõtja otsas vastavat analoogväljundsignaali või potentsiomeetri signaali. Analoogväljundsignaal vastuvõtja otsas on vaikimisi 0-10 V pingesignaal, ja potentsiomeetri signaal on vaikimisi 0-5K;
4） Hädaseiskamisfunktsioon
Kui vajutatakse hädaseiskamisnuppu, kõik lüliti signaali väljundid on lahti ühendatud ja analoogväljund on lahti ühendatud; pärast hädaseiskamise vabastamist, taastatakse kõik lüliti signaalid ja taastatakse analoogväljund; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Some functions of the remote control can be adjusted through parameters. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
Exit the parameter menu: choose to save or not save, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 juurde 9999;
F2W2 range: The display range value of the W2 knob on the display screen, adjustable from 0 juurde 9999;
F3W3 range: The display range value of the W3 knob on the display screen, adjustable from 0 juurde 9999;
F4W4 range: The display range value of the W4 knob on the display screen, adjustable from 0 juurde 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;
The final interpretation right of this product belongs only to our company.
Arvustused
Ülevaateid pole veel.