Paglalarawan
1.Panimula ng produkto
The PHB06B-Laser enables wireless remote control operation of the CNC system via the Modbus TCP protocol, sumusuporta 12 Mga pindutan, and supports real-time display of system coordinates and status.
2.Mga Tampok ng Produkto
1. 12 Mga pindutan, 6 kung saan sinusuportahan ang mga signal ng I/O.
2. Sinusuportahan ang 2.8-inch color screen display.
3. Sinusuportahan ang isang 9-level na axis selector switch, sumusuporta hanggang sa 6-axis na output.
4. Sinusuportahan ang isang 3-level na multiplier switch.
5. Supports one electronic remote control, 100 pulses/revolution.
6. Supports receiver Ethernet interface, Modbus TCP communication.
7. Supports standard Type-C charging, 5V-2A Pag-singil ng Pag-singil, built-in battery specifications 18650/12775mWh.
3.Prinsipyo ng pagtatrabaho
PHB06B-Laser is connected to the user’s system via an Ethernet interface. It performs data interaction through the Modbus TCP protocol. The user system acts as the Modbus master station, which can transmit real-time system display coordinates and read information such as keys and axis selection of the PHB06B-Laser remote control, so as to realize real-time data communication.
Tandaan: For the specific protocol, please refer to the “3D 5-axis Laser Cutting – PHB06B – Laser – Modbus Protocol Description”.
4.Mga pagtutukoy ng produkto
| Boltahe ng supply ng power ng tatanggap |
DC5V-DC24V |
| Button lifespan |
1,000,000 mga oras |
| Operating Temperature |
-25℃ < X < 55℃
|
| Safe drop height |
1 m |
| Receiver port |
Ethernet |
| Number of buttons |
12
|
| Ipakita ang screen |
2.8-inch color screen
|
| wireless communication frequency |
433MHz band |
| Receiver sensitivity |
-100dBm
|
| Handheld transmit power |
15dBm
|
| Distansya ng wireless na komunikasyon |
100 meters barrier-free range |
| Rechargeable Battery Specification |
Rechargeable Battery Specification |
| Charging base power supply voltage |
DC24V/1A |
|
Wired Charging Specification
|
Type-C charging port, DC 5V/2A |
5.Panimula ng Pag -andar ng Produkto
Mga Tala:
① Power Switch
Used to turn the remote control on and off.
② Enable buttons on both sides
The enable button must be pressed while holding the remote control.
③Button area
12 Mga pindutan
④ Axis Selection and Magnification Switch
One 9-gear axis selection switch; one 3-gear magnification switch.
⑤ Emergency Stop Switch
Remote control emergency stop switch.
⑥ Display Screen Area
It can display coordinates, status and other information.
⑦ Electronic Pulse Encoder
One electronic pulse encoder with 100 mga pulso bawat rebolusyon.
⑧ Type-C Charging Port
It is used for connection between the charger and the remote control.
The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key
6. Product Accessories Diagram
7. Receiver and Wiring Ports
8. Configure network access
10. Installation dimensions
Mga Dimensyon ng Pag -install ng Receiver
Unit: millimeters
Thickness: 29.6mm
11.Maintenance and upkeep
1. Mangyaring gamitin ito sa isang tuyong kapaligiran sa temperatura ng silid at presyon upang mapalawak ang buhay ng serbisyo nito.
2. Do not use sharp objects to contact the button area to extend button life.
3. Please keep the appearance of the remote control clean to extend its service life.
4. Please avoid crushing, dropping, or bumping, atbp. to prevent damage to the precision components
5. Avoid moisture and shock during storage and transportation.
12.Impormasyon sa Kaligtasan
1. Mangyaring basahin nang mabuti ang mga tagubilin bago gamitin at ipagbawal ang mga hindi propesyonal sa pagpapatakbo.
2. If you repair it yourself and cause damage, the warranty will be void.
