Stypje 4 oanpaste knoppen, Skeakelje io sinjaal, Utfier sinjaal nei it systeem fia Io-linkprotokol;
Stypje snelle bewegingsknop + en knop -, Druk op en hâld de knop om de hânwiel te ferfangen om de masine te ferpleatsen;
1.Produkt Yntroduksje
Wireless Electronic Handwheel wurdt brûkt foar manuele begelieding, posysje, tool alignment,and other operations on CNC machine tools. Dit produkt oannimt draadloze oerdracht technology, Eliminearje de tradisjonele spring draadferbining, Ferminderjen fan apparatuerferliening feroarsake troch kabels, eliminating the disadvantages of cable dragging and oil stains, en it meitsjen fan operaasje handiger. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,magnification, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.
2. Produkteigenskippen
1. Adoptearje 433mhz draadloze kommunikaasjechnology, draadloze operaasjeôfstân is 40 meters;
2. ANDINSTEN ANDULD FREKENCY HOPPORD, gebrûk 32 sets of wireless remote controllers at the same time without affecting each other;
3. Stypje knop EMERGENCY STOP, Skeakelje io-sinjaal útfier, connected to the system through IO wiring;
4. Stypje 4 oanpaste knoppen, Skeakelje io sinjaal, Utfier sinjaal nei it systeem fia Io-linkprotokol;
5. Stypje snelle bewegingsknop + en knop -, Druk op en hâld de knop om de hânwiel te ferfangen om de masine te ferpleatsen;
6. Stypje 6-Axis Control, Skeakelje io sinjaal, Utfier sinjaal nei it systeem fia Io-linkprotokol;
7. Support 1X,10x, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;
3.Product Specifications
4.Product Features
Notysjes:
①Emergency Stopje knop:
Press the emergency stop button, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.
②Screen display:
③Custom Buttons:
4 oanpaste knoppen, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Druk op en hâld de knop yn en hâld op en skodzje de puls-kodearder om in puls út te stjoeren
sinjaal om de beweging fan 'e masineas te kontrolearjen.
⑨Power switch:
Handwheel power button.
5.Produkt Accessories Diagram
6.Gids foar ynstallaasje fan produkt
6.1 Stappen foar ynstallaasje fan produkt
1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Ferwize nei ús ûntfanger draaddiagram, fergelykje it mei jo apparatuer op it plak, en ferbine
de apparatuer nei de ûntfanger fia kabels.
3. Neidat de ûntfanger is fêst, de antenne foarsjoen fan 'e ûntfanger moat ferbûn wêze,
en it bûtenste ein fan 'e antenne moat wurde ynstalleare of bûten it elektryske kabinet pleatst.
It is recommended to place it on the top of the electrical cabinet for the best signal effect. It
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
dat kin feroarsaakje dat it sinjaal ûnbrûkber is.
4.Úteinlik, Skeakelje de hânwiel Power-skeakel yn en jo kinne de masine betsjinje troch
Handwheel remote control.
6.2 Untfange fan ynstallaasje Dimensions
6.3 Untfang fan ûntfangende referinsjediagram
7. Underhâld en soarch
1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
it tsjinstferliening;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Please avoid squeezing, falling, bumping, ensfh. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. As net lang brûkt, please store the handwheel in a clean and safe place;
6. Pay attention to moisture and shock during storage and transportation.
8. Security Information
1. Lês asjebleaft de ynstruksjes soarchfâldich foar gebrûk. Net-professionals binne ferbean
operaasje.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. As reparaasje nedich is, Nim dan kontakt op mei de fabrikant. As de skea wurdt feroarsake troch selsreparaasje,
De fabrikant sil gjin garânsje leverje.
