Waya saw inji atomatik yankan mara waya ta ramut DH12S-P6S

Aikace-aikace:Ana amfani da shi na musamman don na'urar gani na waya

1.Yana goyan bayan aikin yankan atomatik, ta atomatik yana daidaita saurin gudu bisa ga abin da na yanzu

2.Nisan watsawa mara shamaki shine 200 mita.

3. Goyon bayan direba na DC.

4. Yana goyan bayan saiti na yankan yankan, Irin wannan yankan halin yanzu, Yanke iyakar sauri, da sauransu.

5. Yana goyan bayan sauya tsakanin waya da ruwa ya taɓa canzawa. Za'a iya saita sigogi daban-daban.

Consumptionaramar amfani da ƙararraki
Sauki don amfani

Bayani

1.Tsarin Samfura

Samfura: Dh12s-p6s

Kayan aiki da aka zartar:Wire

2.Kayan haɗi na samfur

Lura: Kuna iya zaɓar ɗaya daga cikin ukun ukun. An antenna na kofin cuptenna shine daidaitaccen ma'auni.

3.Bayanin sauya iko mai nisa

4.Gabatarwa Gabatarwa

Babban saurin motsa jiki: Babba: 0-50
Saurin tafiya: Layi: 0-50
Matsakaicin iyakar hanzari na yankan hatsarin tafiya: Sauri: 0-30
(sigogi daidaitacce)
Atomatik yanka babban motar motsa jiki na yanzu: Saitawa: 28 (sigogi daidaitacce)
Saukar Hannun: Yi lilo: 0-50

Ƙananan ƙarfin lantarki: Baturin ramut ya yi ƙasa sosai, don Allah musanya baturin.

An bar cibiyar sadarwa: An katse siginar mara waya. Da fatan za a duba ƙarfin mai karɓa, kunna shi kuma, kuma zata sake kunna remote.

5.Umurnin aikin sarrafawa mai nisa

1) Kunna ikon nesa

Lokacin da aka kunna mai karɓa, Hasken Wuta na D2 akan mai karba yana kan gaba, Hasken siginar D1 yana farawa zuwa Flash; shigar da batura AA guda biyu a cikin ramut, kunna wutar lantarki, kuma nuna zai nuna saurin motocin, yana nuna farawa mai nasara.

2) Babban tsarin mota da tsarin sauri / babban tsari da tsarin sauri

Latsa ka riƙe “Yana ba da izinin sauri”, Juya “Gabatarwa / baya” Sauya zuwa gaba, kuma babban motar mai karba zai kunna;
Latsa ka riƙe “Yana ba da izinin sauri”, Juya “Gabatarwa / baya” Sauya zuwa juyawa, da kuma babban motar mai karba zai juya kuma kunna;Kawai matsar da canjin zuwa na tsakiya ko na juji, kuma babban abin hawa zai daina kai tsaye ba tare da danna maɓallin Kulawar Gudanar da Saurin ba;Juya da “babban abin hawa” Knob don daidaita tsarin tsarin aikin wuta na injin mai karɓar mai mayar da martabar mai karɓa zuwa 0-10v;

3) Motar tafiya

Latsa ka riƙe “Saurin daidaitawa”, Juya “Gabatarwa / baya” Sauya zuwa gaba ko baya, da motar tafiya za ta motsa a babban gudu na 50;

4) Swing dits da tsari mai sauri

Juya “Lilo hannu / baya” Sauya zuwa sutturar hannu ko koma baya, kuma mai karbar motoci mai karba ya fara; sannan juya “Gyara sauri” Knob don daidaita saurin motocin juyawa;

Latsa ka riƙe “Saurin daidaitawa”, sannan kuma cire “Lilo hannu / baya” canji, Motar hannu ta tafi zuwa babban gudu na 50;

5) Daidaitawar motsin tafiya ta tafiya

Latsa ka riƙe “Saurin daidaitawa” Button kuma juya “gyara sauri” Don daidaita iyakar iyakar hanyar tafiya yayin yankan atomatik;

6) Yankan atomatik

Mataki na farko shine fara babban motar; Mataki na biyu shine daidaita iyakar iyakar hanjin tafiya; Mataki na uku shine motsawa “Gabatarwa / baya” Sauya gaba ko koma baya don shigar da yanayin yankan atomatik;

7) Menu na sigogi (An hana masu amfani daga canza shi ba tare da izini ba)

Shigar da menu na sigogi:A cikin yanayin jagora, Lokacin da babban motsin motar yake 0, tura gaba / baya juyawa sau uku a jere, sannan kuma tura shi sau uku a jere zuwa menu na sigogi;
Fita menu na sigari: Juya sautin gyada mai sauri, Zaɓi Ajiye ko Ajiye, kuma latsa maɓallin Mai kunna don tabbatarwa;
Rated na yanzu: Matsakaicin darajar babban motar, United Ampere;
Sigogin daidaitawa: Atomatik yanka sigogin sarrafawa, ƙin cika alƙawari 800, naúrar Milli na biyu,An haramta gyara;
Rashin kunya: Lokacin da yankan canji na yanzu ya wuce wannan darajar, Rashin aminci yana fuskantar, United Ampere;
Hanzari A1: Lokacin da yankan na yanzu ya ƙasa fiye da yanke na yanzu, Girman sauri ya karu ta kowane hanzari na motar tafiya;
Yaudarar A2: Lokacin da yankan na yanzu ya fi na yanke yankan halin yanzu, Darajar sauri ta ragu da kowane irin motar tafiya;
Swing hannu na yanzu: Tsohuwar darajar, An haramta gyara;
Tsaida lokaci: After the automatic mode current overload shutdown, the current will be detected again after a period of time. If it is less than the set current, the walking motor will automatically start; unit second, default value, An haramta gyara;
Maximum current: The range of main motor feedback current, United Ampere;
Maximum host: Remote control main motor speed adjustment display range;
Maximum walking: Invalid parameter;
Speed limit offset: During automatic cutting, the remote control display walking motor speed limit = 50% of this parameter;
Increase sensitivity: When the main motor feedback current increases, each time the increase exceeds this value, the walking motor accelerates;
Decrease sensitivity: When the feedback current of the main motor decreases, and each time the decreasing value exceeds this value, the walking motor decelerates;
Sensitivity offset: Addara da rage girman abubuwan da aka rage na hankali;
Saita halin yanzu: Atomatik yanka, bakin ƙofar babban abin motsa jiki na yanzu. Idan wannan darajar ta wuce,Mota na tafiya yana farawa da yaudara;A ƙasa wannan darajar, Motar Walking tana farawa don hanzarta;guda ɗaya: Ampere;
Fita fita: Lokacin da yanayin atomatik ya fara, Idan babbar hanyar motsa jiki na yanzu ba kasa da wannan darajar ba,Zai kasance a cikin yanayin IDling.if yana da girma wannan darajar, Zai fita da yanayin IDling kuma shigar da yanayin yankan .unit;
Babu mai ɗaukar hoto:Lokacin da ake shirin atomatik, Idan babbar hanyar motsa jiki na yanzu ba kasa da wannan darajar ba,Yana cikin yanayin babu kaya.If yana da daraja wannan darajar, zai fita da yanayin baƙo kuma shigar da yanayin yankan.unit;
Saukar hannu: Saurin farko na moter motar lokacin da farawa;
Yanayin Yanke: Canja tsakanin Ruwa gani da waya Sayi hanyoyi, and the parameters will switch accordingly after the switch; in blade saw mode, the remote control display adds a swing arm motor, while in wire saw mode, there is no swing arm motor;
Debounce time: When the main motor feedback current exceeds the stop current, the feedback current will be continuously detected. The debounce time is the duration of this continuous detection.After this time, if the main motor current still exceeds the stop current, the walking motor will stop;otherwise, the walking motor will stop. The motor will keep going;
Stop current: The main motor feedback current exceeds this value, and the walking motor will stop;Unit is Ampere;
Offset default: The initial value of the walking motor speed limit when the remote control is turned on = 50% of this value;