wehewehe
1. Huahana hou hoʻopuka
ʻO ka pale mamao no kaʻokiʻana i kaʻokiʻana o ke kaʻa kaʻa iʻikeʻia no ke kaula track type
Nā Mīkiniʻoki. Hoʻohana ia i ka 485 ʻO Modbus rtu protocol e kāohi i ka hema a me kaʻaoʻao hema
Kāne, E like me ka hoʻomakaʻana o ka hoʻokele wikiwiki wikiwiki, hope,
nā mea paʻa hema a me kaʻaoʻao hema. A ua hiki iā ia ke heluhelu i ka hana i kēia manawa i ka nui o ka neʻe nui
hoʻohuli ma o ka 485 Modbus rtu protocol. Ma ka nānāʻana a me ka hoʻohālikelikeʻana i kēia o kēia
nui, Hiki ke hoʻoponoponoʻia ka wikiwiki o nāʻaoʻao hema a me nāʻaoʻao hema i ka manawa maoli i
Loaʻa i ka hanaʻokiʻoki.
2. Nā hiʻohiʻona huahana
1. Hoʻomoeʻo 433mhz kelepona uila pūnaewele, me kahi mamao o ka hana uila 100 mika.
2. Hoʻohana i ka hana hopping alapine maʻalahi a hoʻohana 32 nā hoʻonohonoho o nā mea kūʻai aku mamao
liilii, me ka hoʻopilikiaʻoleʻana i kekahi.
3. Kākoʻo i nā hoʻololi hoʻololi likeʻole 485 Modbus rtu protocol, a me nā manawa kūpono
Hoʻokomoʻia nā mea hoʻohuli:Shanghai Xiellin, Fuji, Huchuan, Zhongan, Kuai, a . No nā mea hana
ʻaʻole kūpono ia, Eʻoluʻolu e kelepona iā mākou no ka hana maʻamau.
4. Kākoʻo i ka hoʻoponopono wikiwiki, Hoʻomaka ana, a me ka heluheluʻana i kēia manawa i nā mea hoʻohuli nui o ke kaʻa nui.
5. Kākoʻo i waihoʻia a me kaʻaoʻao hema hema o ka hoʻololi houʻana i ka wikiwiki, Hoʻomaka ana, Pili, Kua hope, hema a me ka mana kūpono.
6. Kākoʻo laina laina laina o ka hema hema a me kaʻaoʻao hema hema e hoʻomau e hoʻomau i ka mīkini e hele ana i kahi
laina kūpono.
7. Kākoʻo kākoʻoʻana i ka hanaʻana o ke kaula o ke kaula, E hoʻoponopono koke i ka wikiwiki hema a me ka'ākau
ʻO ka manawa maoli e like me kaʻike o kēia manawa o ke kaʻa nui.
8. Ua kūpono pū kekahi me ka hoʻonohonohoʻana i ka mana o ITPTPT no ka hoʻomakaʻana o ka hoʻokele a hoʻopau, A MA MA MALOLO HOOLAHA
E kāohi i ka wikiwiki o ke kaʻa.
3. Nā kiko'ī huahana
4. Hōʻikeʻia ka hana huahana
Nā moʻolelo:
①screen hōʻike:
②mode Speku:
③naly:
Me nā pihi kikowaena, Pono kekahi hana e pono ai e paʻa i ka pihi e hiki ai i ka hana,Eʻike i nā kauoha no kēlā me kēia hoʻololi no nā kiko'ī.
④lai pākuhi:
Ke hoʻohana nei i kahi hoʻololi hou 3-wikiwiki, ke hukiʻana i kēia hoʻololi e hiki ke kāohi i ka huliʻana a me ka huliʻana o ka kaʻa nui. Ma hope o ka hoʻokuʻuʻana iā ia, E noho mau ka moku'āina, A e hōʻikeʻia nā hōʻike e pili ana i ka pale. Hōʻike ka pua S1 ↑, aʻo ka S1 S1 Arrow e hōʻike ana i ka huliʻana.
⑤small drived / reverse reping:
Ua hoʻolakoʻia ka mīkini liʻiliʻi me kahi hoʻololi hou o ka wikiwiki 3-wikiwiki wikiwiki i mua o ia. Kaomiʻana i ka pihi e hiki ai i ke kaomi a me ka hukiʻana i kēia hoʻololi e hiki ke kāohi i ke kaʻa liʻiliʻi e neʻe i mua a i hope, A e hōʻikeʻia ka hōʻike piliʻana i ka papa inoa.the i ka lehulehu, aʻo ka mea nui ↓↓.
⑥ Hoʻoponopono i nā hoʻoponopono hoʻoponopono pololei:
Ke hoʻohana nei i kahi kīwaha e hoʻopili ana, E kaomi i ke pihi e hiki ai, E huli i ke kū pololei, a hōʻike i ka hoʻoponopono kūpono kūpono: Df: Ua hoʻonuiʻia kaʻaoʻao hema hema 1 wae no ka huli ana, a me ka hema
Hoʻonui ka wikiwiki o ke kaʻa 0.1 Kōho; E huli i ka hema hema, Hōʻike laina hoʻoponopono kūpono: Df: Ma ka'ākau, ʻO nā huli a pau o ka huki e hoʻonuiʻia e 1 Kōho, A hoʻonui ka wikiwiki o ka kaʻa'ākau
Ma 0.1 Kōho.
⑦small kaʻa uila huliʻana:
Ke hoʻohana nei i kahi hoʻololi hou 3-wikiwiki, i ka wā i hanaʻia ai, Hiki ke mālamaʻia ka mīkini liʻiliʻi e huli i ka hema a iʻole pololei. Ua hoʻokuʻuʻia, E hoʻopau koke ka mea mamao mamao i kēia hana. I ke kūlana kūlana, Ke huliʻia kēia hoʻololi, E hōʻikeʻia ka hōʻike e pili ana i ka pale. ʻO ka ← ←ʻo ia i hōʻike i ka huli hema, Aʻo ka ↑ ver verng e hōʻike ana i ka huli pololei .When ma keʻano hoʻohuli, E hoʻohuli i kēia hoʻololi a me ka hōʻike e pili ana i ka hōʻike ma ka pale. ʻO ka ← ↓ Arrow e hōʻike i ka huli hema, Aʻo ka ↓ → Arrow e hōʻike i ka huli'ākau.
⑧ E hōʻike i ka wikiwiki wikiwiki:
Ke hoʻohana nei i kahi kīwaha e hoʻopili ana, ʻoho aʻe 1 grid i kēlā me kēia manawa, ʻO ka waiwai wikiwiki o nā loli nui o ke kaʻa nui e like me ka 0.2 Nā'āpana. Hiki i ka wikiwiki wikiwiki ke hoʻololi koke i ka waiwai o ka wikiwiki o ka kaʻa nui.
⑨ EXPUM SPECH SPECUNAM SPEM:
Ke hoʻohana nei i kahi kīwaha e hoʻopili ana, Ma keʻano manual, press the enable button and then rotate one grid at a time，the speed value of the left and right small motors changes by about 0.1 Nā'āpana, and quick rotation can quickly modify the speed value of the small motor.In automatic mode, press the enable button and rotate one grid at a time,the speed limit value F of the small motor changes by approximately 0.1 Nā'āpana. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Remote control power switch
The remote control display screen is turned on.
5. Product accessory diagram
6. ʻO ke alakaʻi kau inoa huahana
6.1 Product installation steps
1. Install the receiver into the electrical cabinet through the buckle on the back, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Refer to our receiver wiring diagram and compare it with your on-site equipment. Connect the equipment to the receiver through wires.
3. After fixing the receiver, it is necessary to connect the antenna equipped with the receiver and install or place the outer end of the antenna outside the electrical cabinet. It is recommended to place it on the top of the electrical cabinet for the best signal effect. It is forbidden to leave the antenna unconnected or place it inside the electrical cabinet, as it may cause the signal to be unusable.
4. Finally, install the battery on the remote control, tighten the battery cover, and turn on the power switch of the remote control. After the remote control display screen shows the normal
working interface, remote control operations can be performed.
6.2 Receiver installation dimensions
6.3 Receiver Wiring Reference Diagram
7. Product operation instructions
7.1 Remote Control Parameter Settings
Method to enter the remote control backend parameters:
Turn the mode switch to manual mode, adjust the speed of the small motor to 25 on both sides, or 0, 10, 20, 40, 50 on all sides, and continuously turn the forward switch of the large motor up 3 times and down 3 times;
Use the “Small Motor Speed Control” knob to flip pages, E kaomi i ke pihi e hiki ai, and then turn the small motor speed control knob to modify parameters. After modification, turn the page to the end,select “Save” to exit, and press the enable button to exit the menu;
The parameters are as follows:
ʻO ka nui loa: feedback range of large motor current, set range 15-200A, Kūpono 100;
Nā Kuʻikahi Speed: Automatic mode, small motor automatically accelerates faster or slower,the smaller the faster, set range 200-1500, Kūpono 800;
Ka hoopunipuni: Set the upper limit that allows the motor speed to change. When the current changes beyond this value, the deceleration will occur. The smaller, the faster the deceleration of the left and right motors, with a range of 05-12 and a default of 06;
Ke hoʻokele neiʻo A1: The larger the motor speed, the faster it increases, with a range of 00-06 and a default of 01;
Secele Of Ap2: The larger the motor speed, the faster it decreases, with a range of 00-06 and a default of 02;
Enable speed regulation: Does the small motor speed regulation need to be enabled? 00 does not enable, 01 enables, default is 01;
E hoʻomaka iāʻoe iho: Does the large motor automatically maintain self-locking after the forward and reverse switches are released? 00 does not hold, 01 holds, Kūpono 01
Ke hele nui nei: maximum speed of left and right motors, range 10-100, Kūpono 50;
Keʻoki nei i kēia manawa: maximum cutting current, displayed on the screen as IC value, range 15-160, Kūpono 30,
corresponding to IC: 30 displayed on the screen. The upper limit of this parameter is 80% of the maximum current;
ʻO ka palena wikiwiki: The default small motor automatic cutting speed when turned on is within the range of 0-100, with a default of 10. The screen displays F1.0, and this parameter is only accurate when the maximum walking is set to 50.
Automatic mode: Set to 00, the automatic/manual switch is a mode switch. Set to 01, the automatic/manual switch is set to the automatic position, the display screen shows lighting, and the automatic terminal output on the receiver is closed. When set to manual, the automatic output terminal is disconnected;
Speed limit deviation: The upper limit of the automatic cutting speed of the small motor ranges from 00 i 200, with a default of 60 and a corresponding display of 6.0 on the screen; Upper limit of display value=speed limit offset x 0.1;
Maximum host: maximum speed of the large motor, range 10-100, Kūpono 50;
Mbus equipment (mandatory): Selection of large motor frequency converter model, range 00-03, Kūpono 03;
00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon）
SBUS equipment (mandatory): Small motor frequency converter model selection, range 00-05, Kūpono 03;
00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon）
04-Anchuanda 05-None
7.2 Parameter setting of frequency converter
1. Command source selection: Communication command channel
2. Main frequency source selection: communication given
3. Baud rate: 19200
4. Data format: No verification, data format<8-N-1>
5. Local address: Set the left frequency converter to 1, the right frequency converter to 2, a
the large motor frequency converter to 3
7.3 Remote Control Operation Instructions
1. Power on the machine, huli i ka mana mamao, enter the remote control backend, set the
remote control backend parameters, mainly setting the small motor and large motor frequency
converter models: (skip this step if the machine manufacturer has already set it);
2. Set the parameters of the frequency converter (skip this step if the machine manufacturer
has already set it);
3. Set the remote control to manual mode, and then use the remote control to move the machine to
the working position;
4. Ma keʻano manual, set the cutting current of the large motor to IC and the speed of the large motor
5. Switch to automatic mode and set the cutting speed limit F value for the small motor;
6. I keʻano maʻalahi, turn the large motor switch to forward to start the large motor, then turn
the small motor switch to forward or reverse, and the remote control enters automatic cutting
mode to start cutting.
8.Product troubleshooting
9.Maintenance
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. Ināʻaʻole i hoʻohanaʻia no kahi manawa lōʻihi, please remove the battery and store the remote control and battery in a clean
and safe place.
6.During storage and transportation, attention should be paid to moisture and shock resistance.
10. Nāʻike palekana palekana
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by
insufficient power, which may result in the remote control being unable to operate.
3. Inā koiʻia ka hoʻoponopono, Eʻoluʻolu e kelepona i ka mea hana. If the damage is caused by self repair, the manufacturer
will not provide warranty.
