1. 12 כפתורים, 6 of which support I/O signals.
2. Supports 2.8-inch color screen display.
3. Supports one 9-level axis selector switch, supporting up to 6-axis output.
4. Supports one 3-level multiplier switch.
Wireless Remote Control for 3D Five-Axis Laser Cutting：PHB06B-LASER
תֵאוּר
1.מבוא מוצר
The PHB06B-Laser enables wireless remote control operation of the CNC system via the Modbus TCP protocol, תומך 12 כפתורים, and supports real-time display of system coordinates and status.
2.תכונות המוצר
1. 12 כפתורים, 6 of which support I/O signals.
2. Supports 2.8-inch color screen display.
3. Supports one 9-level axis selector switch, supporting up to 6-axis output.
4. Supports one 3-level multiplier switch.
5. Supports one electronic remote control, 100 pulses/revolution.
6. Supports receiver Ethernet interface, Modbus TCP communication.
7. Supports standard Type-C charging, 5מפרט טעינה של V-2A, built-in battery specifications 18650/12775mWh.
3.עקרון עבודה
PHB06B-Laser is connected to the user’s system via an Ethernet interface. It performs data interaction through the Modbus TCP protocol. The user system acts as the Modbus master station, which can transmit real-time system display coordinates and read information such as keys and axis selection of the PHB06B-Laser remote control, so as to realize real-time data communication.
פֶּתֶק: For the specific protocol, please refer to the “3D 5-axis Laser Cutting – PHB06B – Laser – Modbus Protocol Description”.
4.מפרט מוצר
| מתח אספקת החשמל של המקלט | DC5V-DC24V |
| Button lifespan | 1,000,000 פִּי |
| Operating Temperature |
-25℃ < X < 55℃
|
| Safe drop height | 1 מ ' |
| Receiver port | אתרנט |
| Number of buttons |
12
|
| מסך תצוגה |
2.8-inch color screen
|
| wireless communication frequency | 433MHz band |
| Receiver sensitivity |
-100dBm
|
| Handheld transmit power |
15dBm
|
| מרחק תקשורת אלחוטי | 100 meters barrier-free range |
| Rechargeable Battery Specification | Rechargeable Battery Specification |
| Charging base power supply voltage | DC24V/1A |
|
Wired Charging Specification
|
Type-C charging port, DC 5V/2A |
5.מבוא פונקציית המוצר
הערות:
① Power Switch
Used to turn the remote control on and off.
② Enable buttons on both sides
The enable button must be pressed while holding the remote control.
③Button area
12 כפתורים
④ Axis Selection and Magnification Switch
One 9-gear axis selection switch; one 3-gear magnification switch.
⑤ Emergency Stop Switch
Remote control emergency stop switch.
⑥ Display Screen Area
It can display coordinates, status and other information.
⑦ Electronic Pulse Encoder
One electronic pulse encoder with 100 פולסים לכל סיבוב.
⑧ Type-C Charging Port
It is used for connection between the charger and the remote control.
The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key
6. Product Accessories Diagram
7. Receiver and Wiring Ports
8. Configure network access
9. Test Instructions
10. Installation dimensions
מידות התקנת מקלט
Unit: millimeters
Thickness: 29.6mm
11.Maintenance and upkeep
1. אנא השתמש בו בסביבה יבשה בטמפרטורת החדר ובלחץ כדי להאריך את חיי השירות שלו.
2. Do not use sharp objects to contact the button area to extend button life.
3. Please keep the appearance of the remote control clean to extend its service life.
4. Please avoid crushing, dropping, or bumping, וכו. to prevent damage to the precision components
5. Avoid moisture and shock during storage and transportation.
12.מידע בטיחות
1. אנא קרא את ההוראות בעיון לפני השימוש ואסר על אנשים שאינם מקצוענים לפעול.
2. If you repair it yourself and cause damage, the warranty will be void.
