Fanuc Disticated Wireless Hluav Taws Xob Hluav Taws Xob

Kev piav txog

1.Khoom Taw Qhia

Wireless Electronic Handwheel yog siv rau kev taw qhia kev qhia, muab tso rau, tool alignment,and other operations on CNC machine tools. Cov khoom lag luam no tau txais wireless spiness technology, Pov Tseg Tsiv Tsoos Hlau Caij Nplooj Hlav Hlau Txuas, Txo cov khoom ua tsis tiav tshwm sim los ntawm cov cable, eliminating the disadvantages of cable dragging and oil stains, and making operation more convenient. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,ua kom dav, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.

2. Khoom nta
1. Txais yuav 433MHz wireless kev sib txuas lus thev naus laus zis, wireless kev ua haujlwm deb yog 40 meters;
2. Txais yuav cov zaus tsis siv neeg hopping muaj nuj nqi, kev siv 32 sets of wireless remote controllers at the same time without affecting each other;
3. Txhawb Nqa Xwm Ceev, Hloov io teeb liab tawm, connected to the system through IO wiring;
4. Ev 4 Kev cai khawm, Hloov io teeb liab, Tso zis teeb liab mus rau lub system los ntawm Io-Link Protocol;
5. Txhawb Lub Pob Ceev Ceev + thiab khawm -, Nias thiab tuav lub pob los hloov lub tes cawm tau txav lub tshuab;
6. Txhawb Nqa 6-Axis Tswj, Hloov io teeb liab, Tso zis teeb liab mus rau lub system los ntawm Io-Link Protocol;
7. Support 1X,10x, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;

3.Product Specifications

4.Product Features

Sau ntawv:
①ل Clock Khawm:
Nias lub khawm thaum muaj xwm ceev, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Screen display:

③Custom Buttons:
4 Kev cai khawm, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Nias thiab tuav lub pob kom pab thiab tuav tes ntawm cov mem tes los xa tawm cov mem tes
teeb liab kom tswj tau lub zog ntawm lub tshuab axis.
⑨Power switch:
Handwheel power button.

5.Daim Duab

6.Cov Khoom Qhia Cov Khoom Siv Installation

6.1 Cov Khoom Siv Cov Khoom Siv Installation

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Xa mus rau peb cov ntawv txais nyiaj xoos, Sib piv nws nrog koj cov khoom siv hauv thaj chaw, Thiab Txuas Rau
cov khoom siv rau tus txais nyiaj ntawm cables.
3. Tom qab tus txais yog tsau, Tus kav hlau txais xov tau nruab nrog tus txais yuav tsum tau sib txuas,
thiab sab nraud ntawm lub kav hlau txais xov yuav tsum tau nruab lossis muab tso rau sab nraum cov txee hluav taws xob.
Nws raug nquahu kom muab tso rau saum cov txee hluav taws xob rau cov teeb liab zoo tshaj. Nws
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
uas yuav ua rau lub teeb liab kom siv tsis tau.
4.Kawg no, tig rau ntawm tes fais fab hloov thiab koj tuaj yeem tsav lub tshuab los ntawm
Handwheel chaw taws teeb tswj.

6.2 Tau txais qhov ntev

6.3 Tus txais ntaub ntawv siv tshuaj lom neeg siv

7. Kev Txij Nkawm thiab Kev Saib Xyuas

1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
the service life;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Thov zam tsis txhob muab cia, kev poob, tsoo, tus lwm yam. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. Yog tias tsis siv sijhawm ntev, Thov khaws cov tes ua kom huv thiab nyab xeeb;
6. Pay attention to moisture and shock during storage and transportation.

8. Security Information

1. Please read the instructions carefully before use. Non-professionals are prohibited from
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. Yog tias yuav tsum tau kho kho, Thov hu rau cov chaw tsim khoom. If the damage is caused by self-repair,
Cov chaw tsim khoom yuav tsis muaj kev tiv thaiv.