Opis
1. Uvod proizvoda
The crawler vehicle rope saw automatic cutting remote control is suitable for crawler rope saw cutting machines. It adopts 485ModbusRTU protocol to control the speed start and front and rear left and right direction control of the left and right crawler inverters, as well as the large motor frequency conversion RTU protocol to control the speed start and front and rear left and right direction control of the left and right crawler inverters, and the large motor frequency conversion over-current analysis and comparison, automatically adjust the left and right crawler speeds in real time to achieve automatic cutting function.
2. Značajke proizvoda
1. Adopt 433MHZ wireless communication technology, wireless operation distance is 100 metara.
2. Adopt automatic frequency hopping function, use 32 sets of wireless remote controllers at the same time, bez utjecaja jedni na druge.
3. Support all inverters with 485-Modbus RTU protocol. The inverter brands that have been adapted include:Šangaj Xielin, Fuji, Inovance, Zhongchen, Inv, Anchuanda. If the brand is not ada please contact us for customization.
4. Support large motor inverter start, speed regulation, and current reading.
5. Support left and right crawler inverter speed regulation, start, front and back left and right control.
6. Support left and right crawler inverter straight line correction to keep the machine moving in a straight line.
7. Support rope saw automatic cutting function, automatically adjust the left and right crawler speed in real time according to the large motor current information.
8. Može li se izgled proizvoda prilagoditi, it is compatible with direct IO output to control the start and stop of the motor, and analog voltage output to control the motor speed.
3. Specifikacije proizvoda
4. UVOD FUNKCIJA PROIZVODA
Bilješke:
① ekranski zaslon:
②Mode Switch:
Using a 2-level switch, it is possible to switch between automatic and manual modes, and the corresponding mode will be displayed on the screen for switching.
③ Enable:
Kombinirani gumbi, Neke operacije zahtijevaju držanje gumba za omogućavanje za rad, please refer to the instructions for each switch for details.
④ Large motor switch:
Korištenje 3-stupanjskog prekidača za resetiranje, Povlačenje ovog prekidača može kontrolirati naprijed i obrnutu rotaciju velikog motora. Nakon puštanja, Država će ostati, a na ekranu će biti odgovarajućih zaslona. The t arrow indicates forward rotation, and the y arrow indicates reverse rotation.
⑤Small Motor prema naprijed/obrnuto prekidač:
Using a 3-speed self-locking switch, pulling this switch can control the small motor to move forward and backward. The corresponding display will show on the screen, with the t arrow indicating forward and the ↓ arrow indicating backward.
⑥Remote control power switch:
The remote control display screen is turned on.
⑦ small motor turning switch:
Korištenje 3-stupanjskog prekidača za resetiranje, Kad ručno upravlja, Mali motor se može kontrolirati da skrene lijevo ili desno. Jednom objavljen, the remote control will automatically stop this action.When in the forward state, turn this switch and the corresponding display will appear on the screen.The + arrow indicates left turn, and the – arrow indicates right turn.When in reverse mode, turn this switch and the corresponding display will appear on the screen.The + arrow indicates left turn, and the – arrow indicates right turn.Press and hold the enable button, then turn this switch to perform a stationary turning function, making the turn faster.
⑧ Velika regulacija brzine motora:
Korištenje gumba za više okretaja, rotate the knob to adjust the speed S1 of the large motor For every 1 grid rotation, Vrijednost brzine velikog motora mijenja se za približno 0.2 jedinice, and rapid rotation can quickly modify the speed value of the large motor.
9 Small motor speed regulation (linear correction):To use the multi turn encoder knob, U ručnom načinu rada, for every 1 turn of the knob, the speed value of the small motor changes by approximately 0.1 jedinice. Fast rotation can quickly modify the speed value of the small motor.
U automatskom načinu rada, press the enable button and rotate 1 rešetka svaki put. The speed limit value F of the small motor changes by approximately 0.1 jedinice. Rapid rotation can quickly modify the speed limit value of the small motor.Press the enable button, turn the knob to the right, and the straight line correction display shows D f: lijevo. Each rotation of the knob increases by 1 jedinica; Skrenite lijevo ručicu, Prikaz ispravljanja ravne linije: Df: pravo. Each rotation of the knob increases by 1 jedinica, and each correction unit corresponds to a motor speed control AVI voltage of about 0.02 V.
5. Product accessory diagram
6. Vodič za instalaciju proizvoda
6.1 Product Installation Steps
1. Install the receiver in the electrical cabinet through the buckle on the back, or install it in the electrical cabinet through the screw holes at the four corners of the receiver.
2. Refer to our receiver wiring diagram, compare your on-site equipment, and connect the equipment to the receiver through wires.
3. After the receiver is fixed, the antenna equipped with the receiver must be connected, and the outer end of the antenna must be installed or placed outside the electrical cabinet. It is recommended to place it on the top of the electrical cabinet for the best signal effect. It is forbidden to leave the antenna unconnected or place the antenna inside the electrical cabinet, which may cause poor signal and unusable.
4. Finally, install the battery in the remote control, tighten the battery cover, and then turn on the power switch of the remote control. After the remote control display shows the normal working interface, you can perform remote control operation.
6.2 Receiver installation dimensions
6.3 Receiver Wiring Reference Diagram
7. Product operation instructions
7.1 Remote Control Parameter Settings
How to enter the background parameters of the remote controller: turn the mode switch to manual mode, adjust the speed of the small motor to 25, or 0, 10, 20, 40, 50, and turn the forward switch of the large motor upwards 3 times and downwards 3 times;
Use the “Small Motor Speed Control” knob to turn the page, press Enable and turn the small motor speed control knob to modify the parameters; after modification, turn the page to the end, select Save and Exit, and press the Enable button to exit the menu;
The parameters are as follows:Maksimalna struja: large motor current feedback value range, setting range 15-200A, zadano 60;
Parametri kontrole brzine: automatic mode small motor automatic acceleration speed, the smaller the faster, setting range 200-1500, zadano 1000;
Parametar usporavanja: Set the upper limit of the motor speed change allowed. When the current changes beyond this value, it will decelerate. The smaller it is, the faster the left and right motors will decelerate. The range is 05-12, and the default is 06;
Ubrzanje a1: The larger the value, the faster the motor speed increases, range 00-06,default 01; Usporavanje A2: The larger the value, the faster the motor speed decreases, range 00-06, zadano 02;
Enable speed regulation: Whether the small motor speed regulation needs to be enabled, 00 is not enabled, 01 is enabled, zadano 01;
Startup self-locking: Whether the large motor will automatically keep self-locking after the forward and reverse switch is released, 00 is not maintained, 01 is maintained, zadano 01;
Maximum travel: Maximum speed of the left and right motors, range 10-100, zadano 50;
Cutting current: Maximum cutting current, the screen displays IC value, range 15-160, zadano 30, the screen displays IC: 30. The upper limit of this parameter = maximum current x 80%;
Default speed limit: The default small motor automatic cutting speed at startup, range 00-100, zadano 10, the screen displays F1.0, this parameter is only accurate when the maximum travel is set to 50.
Wireless channel: Default is 10. When the remote control signal is unstable or there is signal interference on site, you can modify this parameter to switch channels to avoid interference;
Speed limit offset: The upper limit of the automatic cutting speed of the small motor,range 00-200, zadano 60, the screen displays 6.0; Display value upper limit = speed limit offset × 0.1;
Maximum host: The maximum speed of the large motor, range 10-100, zadano 50;
Mbus device ( mandatory ): large motor inverter model selection, range 00-03, zadano 03;
00- Šangaj Xielin 01 Fuji
02- Inv 03 Inovance（Zhongchen, Robicon）
SBUS equipment (mandatory): Small motor frequency converter model selection, range 00-05, zadano 03;
00- Šangaj Xielin 01 Fuji
02- Inv 03 Inovance（Zhongchen, Robicon）
04-Anchuanda 05-None
8. Product troubleshooting
7.2 Parameter setting of frequency converter
1. Command source selection: Communication command channel
2. Main frequency source selection: communication given
3. Baud rate: 19200
4. Data format: No verification, data format<8-N-1>
5. Local address: Set the left frequency converter to 1, the right frequency converter to 2, and the large motor frequency converter to 3
7.3 Remote Control Operation Instructions
1. Power on the machine, turn on the remote control, enter the remote control background, set the remote control background parameters, mainlyIt is to set the models of small and large motor frequency converters (skip this step if the machine manufacturer has already set them);
2. Set the parameters of the frequency converter (skip this step if the machine manufacturer has already set it);
3. Set the remote control to manual mode, and then use the remote control to move the machine to the working position;
4. U ručnom načinu rada, set the IC value for the cutting current of the large motor and the speed of the large motor;
5. Switch to automatic mode and set the cutting speed limit F value for the small motor;
6. U automatskom načinu rada, turn the large motor switch to forward to start the large motor, and then turn the small motor switch to forward or reverse. The remote control enters automatic cutting mode and begins cutting.
9.Maintenance
1. Please use it in a dry environment at room temperature and pressure to extend its service life.
2. Please avoid using in abnormal environments such as rain and water bubbles to extend the service life.
3. Please keep the battery compartment and metal shrapnel area clean.
4. Please avoid damaging the remote control due to squeezing and falling.
5. Ako se dugo ne koristi, please remove the battery and store the remote control and battery in a clean and safe place.
6.During storage and transportation, attention should be paid to moisture and shock resistance.
10. Safety Information
1. Please read the instructions carefully before use and prohibit non professionals from operating.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by insufficient power, which may result in the remote control being unable to operate.
3. If repair is required, please contact the manufacturer. If the damage is caused by self repair, the manufacturer will not provide warranty
