FANUC namjenski bežični elektronički ručni kotač

Opis

1.Uvod proizvoda

Bežični elektronički kotač koristi se za ručne vodstva, pozicioniranje, tool alignment,and other operations on CNC machine tools. Ovaj proizvod prihvaća tehnologiju bežičnog prijenosa, eliminirajući tradicionalnu vezu s opružnom žicom, smanjenje kvarova opreme uzrokovane kablovima, eliminating the disadvantages of cable dragging and oil stains, i čineći rad praktičnijim. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,magnification, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.

2. Značajke proizvoda
1. Usvojite 433MHz bežičnu komunikacijsku tehnologiju, bežični rad udaljenost je 40 metara;
2. Usvojite funkciju skakanja automatske frekvencije, koristiti 32 sets of wireless remote controllers at the same time without affecting each other;
3. Podrška gumb za zaustavljanje hitne pomoći, Prebacite IO izlaz signala, connected to the system through IO wiring;
4. Podržati 4 Prilagođeni gumbi, switch IO signal, output signal to the system through IO-LINK protocol;
5. Support quick movement button + and button -, press and hold the button to replace the handwheel to move the machine;
6. Podrška kontrola sa 6 osi, switch IO signal, output signal to the system through IO-LINK protocol;
7. Support 1X,10x, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;

3.Product Specifications

4.Product Features

Bilješke:
Gumb za zaustavljanje hitaca:
Pritisnite gumb za zaustavljanje za hitne slučajeve, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Screen display:

③Custom Buttons:
4 Prilagođeni gumbi, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Pritisnite i držite gumb za omogućavanje i protresite impulsni koder da biste poslali puls
signal za kontrolu kretanja osi stroja.
⑨Power switch:
Handwheel power button.

5.Dijagram dodataka za proizvod

6.Vodič za instalaciju proizvoda

6.1 Koraci instalacije proizvoda

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Pogledajte naš dijagram ožičenja prijemnika, Usporedite ga s opremom na licu mjesta, i spojiti
Oprema za prijemnik putem kabela.
3. Nakon što se prijemnik fiksira, Antena opremljena prijemnikom mora biti povezana,
a vanjski kraj antene mora se ugraditi ili postaviti izvan električnog ormara.
Preporučuje se da ga postavite na vrh električnog ormara za najbolji signalni učinak. To
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
što može uzrokovati da signal bude neupotrebljiv.
4.Konačno, Uključite prekidač za napajanje ručnog kotača i možete upravljati strojem
daljinski upravljač ručnog kotača.

6.2 Dimenzije instalacije prijemnika

6.3 Referentni dijagram ožičenja prijemnika

7. Održavanje i briga

1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
životni vijek;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Molimo izbjegavajte stiskivanje, pad, naletjeti, itd. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. Ako se dugo ne koristi, Molimo pohranite ručni kotač na čisto i sigurno mjesto;
6. Pay attention to moisture and shock during storage and transportation.

8. Security Information

1. Prije uporabe pažljivo pročitajte upute. Non-professionals are prohibited from
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. Ako je potreban popravak, Molimo kontaktirajte proizvođača. If the damage is caused by self-repair,
Proizvođač neće pružiti jamstvo.