지원하다 4 맞춤 버튼, switch IO signal, output signal to the system through IO-LINK protocol;
Support quick movement button + and button -, press and hold the button to replace the handwheel to move the machine;
1.제품 소개
무선 전자 핸드 휠은 수동 지침에 사용됩니다, 포지셔닝, tool alignment,and other operations on CNC machine tools. 이 제품은 무선 전송 기술을 채택합니다, 기존 스프링 와이어 연결 제거, 케이블로 인한 장비 고장 감소, eliminating the disadvantages of cable dragging and oil stains, 작업을 더욱 편리하게 만들어줍니다.. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,magnification, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.
2. 제품 특징
1. 433MHz 무선 통신 기술을 채택하십시오, 무선 작동 거리입니다 40 미터;
2. 자동 주파수 호핑 기능을 채택하십시오, 사용 32 sets of wireless remote controllers at the same time without affecting each other;
3. 비상 정지 버튼을 지원합니다, 스위치 IO 신호 출력, connected to the system through IO wiring;
4. 지원하다 4 맞춤 버튼, switch IO signal, output signal to the system through IO-LINK protocol;
5. Support quick movement button + and button -, press and hold the button to replace the handwheel to move the machine;
6. 6 축 제어를 지원합니다, switch IO signal, output signal to the system through IO-LINK protocol;
7. Support 1X,10엑스, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;
3.Product Specifications
4.Product Features
메모:
ingency 중지 버튼:
비상 정지 버튼을 누릅니다, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.
②Screen display:
③Custom Buttons:
4 맞춤 버튼, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
활성화 버튼을 길게 누르고 펄스 인코더를 흔들어 펄스를 보내십시오.
기계 축의 움직임을 제어하는 신호.
⑨Power switch:
Handwheel power button.
5.제품 액세서리 다이어그램
6.제품 설치 안내서
6.1 제품 설치 단계
1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.수신기 배선 다이어그램을 참조하십시오, 현장 장비와 비교하십시오, 그리고 연결
케이블을 통해 수신기의 장비.
3. 수신기가 고정 된 후, 수신기가 장착 된 안테나를 연결해야합니다,
그리고 안테나의 외부 끝은 전기 캐비닛 외부에 설치하거나 배치해야합니다..
It is recommended to place it on the top of the electrical cabinet for the best signal effect. 그것
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
신호를 사용할 수 없을 수 있습니다.
4.마지막으로, 핸드 휠 파워 스위치를 켜면 기계를 작동 할 수 있습니다.
핸드 휠 리모컨.
6.2 수신기 설치 치수
6.3 수신기 배선 참조 다이어그램
7. 유지 관리 및 관리
1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
서비스 수명;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. 압박을 피하십시오, 떨어지는, 범핑, 기타. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. 오랫동안 사용되지 않은 경우, 핸드 휠을 깨끗하고 안전한 곳에 보관하십시오.;
6. Pay attention to moisture and shock during storage and transportation.
8. Security Information
1. 사용하기 전에 지침을주의 깊게 읽으십시오. Non-professionals are prohibited from
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. 수리가 필요한 경우, 제조업체에 문의하십시오. If the damage is caused by self-repair,
제조업체는 보증을 제공하지 않습니다.
