1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 미터.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, 축 선택, magnification, and other information.
3. 비상 정지 버튼 지원, 스위치 IO 신호 출력, and the hand wheel shutdown emergency stop is still valid.
4. 지원합니다 6 맞춤 버튼, switch IO signals, and can output signals to the system through IO wiring or communication.
유선 전자 핸드휠 사용 설명서
설명
1. 제품소개
Electronic handwheel is used for manual guidance, 포지셔닝, tool alignment, and other operations on CNC machine tools. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, magnification, buttons, andother signals through communication.
2.제품 기능적 특징
1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 미터.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, 축 선택, magnification, and other information.
3. 비상 정지 버튼 지원, 스위치 IO 신호 출력, and the hand wheel shutdown emergency stop is still valid.
4. 지원합니다 6 맞춤 버튼, switch IO signals, and can output signals to the system through IO wiring or communication.
5. 지원합니다 6 또는 8 축 제어, with switch IO signals that can be output to the system through IO wiring or communication.
6. 지원합니다 3 또는 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Support pulse encoder, 100 pulses/turn, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.
3. 제품사양
| Handwheel working power supply voltage | DC24V/1A |
| 수신기 전원 전압 | DC24V/1A |
| Receiver IO output load range | DC24V |
| Hand wheel end cable length | 10중 |
| Receiver end cable length | 1중 |
| Receiver end network cable length | 3중 |
| Operating temperature | -25℃<엑스<55℃ |
| Anti-fall height | 1중 |
| Custom Button Quantity | 6 |
| Product dimensions | 233*90.7*77.4（mm） |
4.제품 기능 소개
메모:
Emergency stop button:
비상정지 버튼을 눌러주세요, 수신기의 두 세트의 비상 정지 IO 출력이 연결 해제됩니다., 핸드휠의 모든 기능이 유효하지 않게 됩니다..
After releasing the emergency stop, 수신기의 비상 정지 IO 출력이 닫힙니다., and all functions of the handwheel are restored.
② Screen display:
PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 맞춤 버튼, 각각은 수신기의 IO 출력 지점에 해당합니다., also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
활성화 버튼을 길게 누르세요., 펄스 엔코더를 흔들어, 펄스 신호를 방출하다, and control the movement of the machine axis.
⑧ Handwheel cable:
Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.
5. 제품 액세서리 다이어그램
6. 제품 설치 가이드
6.1 제품 설치 단계
6.1 제품 설치 단계
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. 수신기 배선 다이어그램을 참조하고 현장 장비와 비교하십시오.. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. 수신기를 고정한 후, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.
6.2 수신기 설치 치수
6.3 Installation dimensions of aviation plugs
6.4 수신기 배선 참조 다이어그램
7.제품 작동 지침
7.제품 작동 지침
1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.
2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.
3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.
4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. 배율 선택: Switch the magnification switch and select the magnification level you need.
7. 축 이동: 활성화 버튼을 길게 누르세요., 축 선택 스위치를 선택하세요, 확대 스위치를 선택하세요, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. 비상정지 버튼을 눌러주세요, 수신기의 해당 비상 정지 IO 출력이 연결 해제됩니다., 핸드휠 기능이 비활성화됩니다, 비상 정지 버튼을 놓아라, 비상 정지 IO 출력이 닫힙니다., 그러면 핸드휠 기능이 복원됩니다..
8.제품 모델 설명
① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : 축 선택 스위치의 개수를 나타냅니다., represents axes, and represents
축.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, B는 인코딩된 출력 신호를 나타냅니다..
9.Product trouble shooting
10.유지
1. 서비스 수명을 연장하려면 실온 및 압력의 건조한 환경에서 사용하십시오..
2. 서비스 수명을 연장하려면 비, 물거품 등 비정상적인 환경에서의 사용을 피하십시오..
3. 서비스 수명을 연장하려면 핸드휠의 외관을 깨끗하게 유지하십시오..
4. 짜는 것을 피해주세요, 떨어지는, 부딪히다, 등. 핸드휠 내부 정밀 부품의 손상이나 정확도 오류를 방지하기 위해.
5. 장기간 사용하지 않을 경우, please store the handwheel in a clean and safe place.During storage and transportation, 습기와 충격에 주의해야 합니다..
11. 안전정보
1. 사용하기 전에 지침을 주의 깊게 읽고 전문가가 아닌 사람의 조작을 금지하십시오..
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. 수리가 필요한 경우, 제조사에 문의해주세요. 자가수리로 인한 손해인 경우, 제조업체는 보증을 제공하지 않습니다
