Support 4 bokotra manokana, switch IO signal, output signal to the system through IO-LINK protocol;
Support quick movement button + and button -, press and hold the button to replace the handwheel to move the machine;
1.Fampidirana vokatra
Wireless HandWheel Handwheel dia ampiasaina amin'ny fitarihana manual, toerany, tool alignment,and other operations on CNC machine tools. Ity vokatra ity dia mampiditra teknolojia fifindrana an-tserasera tsy misy tariby, Famongorana ny fifandraisana tariby nentim-paharazana, Ny fampihenana ny fitaovana tsy fahombiazan'ny tariby, eliminating the disadvantages of cable dragging and oil stains, ary manao asa mora kokoa. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,magnification, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.
2. Endri-javatra vokatra
1. Manatera ny teknolojia fifandraisana Wireless 433Mhz, Ny elanelam-pifandraisana Wireless dia 40 metatra;
2. Adopt otomatic fatra-miasa, Ampiasao 32 sets of wireless remote controllers at the same time without affecting each other;
3. Tohanana ny bokotra fiatoana vonjy maika, Famokarana famantarana IO, connected to the system through IO wiring;
4. Support 4 bokotra manokana, switch IO signal, output signal to the system through IO-LINK protocol;
5. Support quick movement button + and button -, press and hold the button to replace the handwheel to move the machine;
6. Tohanana ny fanaraha-maso 6-axis, switch IO signal, output signal to the system through IO-LINK protocol;
7. Support 1X,10x, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;
3.Product Specifications
4.Product Features
-tsoratra:
Bokotra fiatoana:
Tsindrio ny bokotra fiatoana vonjy maika, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.
②Screen display:
③Custom Buttons:
4 bokotra manokana, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Tsindrio ary hazony ny bokotra Ampifamadiho ny bokotra ary ahintsano ny encoder pulsa handefa pulse
Fambara mba hifehezana ny hetsiky ny Mine Axis.
⑨Power switch:
Handwheel power button.
5.Ny sary miditra amin'ny vokatra
6.Guide fametrahana vokatra
6.1 Dingana fametrahana vokatra
1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Jereo ny sary an-tsokosoko mpandray anjara, Ampitahao amin'ny fitaovana an-tserasera, ary mampifandray
Ny fitaovana ho an'ny mpandray an-tariby amin'ny alàlan'ny tariby.
3. Rehefa avy raikitra ilay mpandray, Ny antenne manana ilay mpandray dia tsy maintsy mifandray,
ary ny faran'ny ivelan'ny antena dia tsy maintsy apetraka na napetraka eo ivelan'ny kabinetra elektrika.
Dia natokana hametraka izany eo an-tampon'ny kabinetra elektrika ho an'ny vokatra tsara indrindra. It
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
which may cause the signal to be unusable.
4.Farany, turn on the handwheel power switch and you can operate the machine by
handwheel remote control.
6.2 Famaranana fametrahana refesina
6.3 Kisary referengar
7. Fikojakojana sy fikarakarana
1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
Ny fiainana fanompoana;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Please avoid squeezing, falling, bumping, sns. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. Raha tsy ampiasaina mandritra ny fotoana maharitra, please store the handwheel in a clean and safe place;
6. Pay attention to moisture and shock during storage and transportation.
8. Security Information
1. Azafady vakio tsara ny torolàlana alohan'ny hampiasana azy. Non-professionals are prohibited from
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. Raha ilaina ny fanamboarana, Azafady mba mifandraisa amin'ny mpanamboatra. If the damage is caused by self-repair,
Ny mpanamboatra dia tsy hanome warranty.
