1. 12 बटणे, 6 of which support I/O signals.
2. Supports 2.8-inch color screen display.
3. Supports one 9-level axis selector switch, supporting up to 6-axis output.
4. Supports one 3-level multiplier switch.
Programmable CNC Wireless Remote Control PHB06B-LASER
वर्णन
1.उत्पादन परिचय
The PHB06B-Laser enables wireless remote control operation of the CNC system via the Modbus TCP protocol, समर्थन 12 बटणे, and supports real-time display of system coordinates and status.
2.उत्पादन वैशिष्ट्ये
1. 12 बटणे, 6 of which support I/O signals.
2. Supports 2.8-inch color screen display.
3. Supports one 9-level axis selector switch, supporting up to 6-axis output.
4. Supports one 3-level multiplier switch.
5. Supports one electronic remote control, 100 pulses/revolution.
6. Supports receiver Ethernet interface, Modbus TCP communication.
7. Supports standard Type-C charging, 5V-2A चार्जिंग तपशील, built-in battery specifications 18650/12775mWh.
3.कार्यरत तत्व
PHB06B-Laser is connected to the user’s system via an Ethernet interface. It performs data interaction through the Modbus TCP protocol. The user system acts as the Modbus master station, which can transmit real-time system display coordinates and read information such as keys and axis selection of the PHB06B-Laser remote control, so as to realize real-time data communication.
नोंद: For the specific protocol, please refer to the “3D 5-axis Laser Cutting – PHB06B – Laser – Modbus Protocol Description”.
4.उत्पादन तपशील
| रिसीव्हर वीज पुरवठा व्होल्टेज | DC5V-DC24V |
| Button lifespan | 1,000,000 वेळा |
| Operating Temperature |
-25℃ < एक्स < 55℃
|
| Safe drop height | 1 मी |
| Receiver port | Ethernet |
| Number of buttons |
12
|
| डिस्प्ले स्क्रीन |
2.8-inch color screen
|
| wireless communication frequency | 433MHz band |
| Receiver sensitivity |
-100dBm
|
| Handheld transmit power |
15dBm
|
| वायरलेस संप्रेषण अंतर | 100 meters barrier-free range |
| Rechargeable Battery Specification | Rechargeable Battery Specification |
| Charging base power supply voltage | DC24V/1A |
|
Wired Charging Specification
|
Type-C charging port, DC 5V/2A |
5.उत्पादन कार्य परिचय
नोट्स:
① Power Switch
Used to turn the remote control on and off.
② Enable buttons on both sides
The enable button must be pressed while holding the remote control.
③Button area
12 बटणे
④ Axis Selection and Magnification Switch
One 9-gear axis selection switch; one 3-gear magnification switch.
⑤ Emergency Stop Switch
Remote control emergency stop switch.
⑥ Display Screen Area
It can display coordinates, status and other information.
⑦ Electronic Pulse Encoder
One electronic pulse encoder with 100 प्रति क्रांती डाळी.
⑧ Type-C Charging Port
It is used for connection between the charger and the remote control.
The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key
6. Product Accessories Diagram
7. Receiver and Wiring Ports
8. Configure network access
9. Test Instructions
10. Installation dimensions
प्राप्तकर्ता स्थापना परिमाणे
युनिट: millimeters
Thickness: 29.6mm
11.Maintenance and upkeep
1. कृपया खोलीच्या तपमानावर कोरड्या वातावरणात वापरा आणि त्याची सेवा आयुष्य वाढवण्यासाठी दबाव ठेवा.
2. Do not use sharp objects to contact the button area to extend button life.
3. Please keep the appearance of the remote control clean to extend its service life.
4. Please avoid crushing, dropping, or bumping, इ. to prevent damage to the precision components
5. Avoid moisture and shock during storage and transportation.
12.सुरक्षितता माहिती
1. कृपया वापरण्यापूर्वी सूचना काळजीपूर्वक वाचा आणि गैर-व्यावसायिकांना ऑपरेट करण्यास मनाई करा.
2. If you repair it yourself and cause damage, the warranty will be void.
