Home|Products
  • Application:used for various industrial equipment

    1.Maximum 26 relay outputs. 2.Barrier-free transmission distance is 200 meters. 3. Maximum 4 channels of analog 0-10V output (display range can be customized): supports 2 channels of extended isolated digital potentiometer output; 4. 2 analog inputs; and displayed on the remote control, the display range can be customized. 5. 1 emergency stop relay output normally closed contact.
    • Low power consumption design
    • Easy to use
  • Application:Specially used for crawler wire saw machine

    1.Supports automatic cutting function, automatically adjusts cutting speed according to motor current feedback 2.Barrier-free transmission distance is 200 meters. 3. Support DC driver. 4. Supports multiple cutting parameter settings, such as cutting current, cutting speed limit, etc. 5. Supports switching between wire saw and blade saw modes. Different cutting parameters can be set in different modes.
    • Low power consumption design
    • Easy to use
  • Application:Specially used for crawler wire saw machine

    1.Supports automatic cutting mode, automatically adjusts the walking speed of the small motor according to the large motor current, and achieves automatic cutting control. 2.Barrier-free transmission distance is 200 meters. 3. Supports dual speed regulation for large motors and small motors. 4. Support small motor turning in place. 5. Supports left and right wheel small motor linear correction.
    • Low power consumption design
    • Easy to use
  • Enhanced type wireless MPG - ATWGP-12 axis
    • 40m barrier-free distance
    • Signal stabilizationstrong anti-interference
    • Easy to use
  • The remote controlsupports up to 32 custom buttons, corresponding to Siemens PLC addresses,which can be freely programmed; 9 LED status indicators, support Siemens PLC address, freely programmable;
  • Support Siemens PLC: S7-200/-300/-1200

    Support real-time display of Siemens system coordinate values

    6 custom buttons can control 6 switch outputs

    • The wireless transmission distance is open 40 meter
    • support:one 100PPR encoderone 6-speed axis selection switchone 3-speed magnification switch
  • operating System Microsoft Windows7 Operating System CPU model Intel J1900 Hard disk 64G RAM 4G GPU Integrated LCD Display 15inches Resistive touch screen Port 8xUSB and 1xEthernet Power Supply DC24V/5A

    • LCD Display
    • Integrated system
  • Application:Mainly used in industrial equipment, welding industry, cutting industry, mining industry, etc.

    1.Using 433MHZ wireless transmission frequency, long-distance wireless frequency hopping technology, barrier-free transmission distance of 200 meters 2.The same range of use supports 32 sets of wireless remote control to be used at the same time, without interfering with each other 3. Supports 14 pushbutton switches, each independently controlling the switching output of 14 NO points on the receiver 4.Supports 2 external pushbutton switch inputs, each of which can control 1 set of switching outputs on the receiver 5.Low-power design; 2 AA batteries, normal use for 1 month 6.Waterproof design with IP67 rating
    • Low power consumption design
    • Easy to use
  • Application:Specially used for floor grinder automation wireless control

    1.Using frequency hopping transmission technology and 32 sets of equipment can be used at the same time on the spot without interfering with each other. 2.Barrier-free transmission distance is 200 meters. 3. Support 2 channel analog: 0-10V analog voltage output. 4. Support 7-way switching relay output, with load capacity: AC 3A/250V or DC 5A/30V. 5. Support 1 channel emergency stop output, load capacity AC 3A/250V or DC 5A/30V. 6. LCD display with backlight, displaying 2 outputs and 7 switching statuses.
    • Low power consumption design
    • Easy to use
  • Enhanced type wireless MPG - ATWGP-8/9/10 axis
    • 40m barrier-free distance
    • Signal stabilizationstrong anti-interference
    • Easy to use
  • Application:Welding machine automation welding and welding operator.Turn Rolls

    1.Using frequency hopping transmission technology, the wireless performance is stable and reliable.

    2.In the same working area,it can support 32pcs equipments used at the same time.

    3.Support 4 channels of analog, 0-10V analog voltage input. 4.Support 18 relay outputs, with load capacity: AC 3A/250V or DC 5A/30V 5.LCD display with backlight, display W1-W4 output and input,always with 18 switches 6.Low power consumption design ,2pcs AA batteries can use 1 month in normal
    • Low power consumption design
    • Easy to use
  • Programmable CNC remote control is a kind of wireless equipment provided to developers for secondary development and remote control of CNC system through wireless remote control technology; We provide users with DLL Dynamic Link Library under Windows development environment, so that developers can use the remote control function for secondary development, and make it suitable for developers' own software system.

Wixhc Technology

We are a leader in CNC industry, specializing in wireless transmission and CNC Motion Control for more than 20 years. We have dozens of patented technologies, and our products sell well in more than 40 countries around the world, accumulating typical applications of nearly 10000 customers.

Recent Tweets

Newsletter

Sign-up to get the latest news and update information. Don't worry, we won't send spam!