Kawalan Jauh Wayarles CNC Boleh Diprogram PHB06B

Penerangan

 

1.Pengenalan Produk

The programmable CNC remote control PHB06B is suitable for wireless
Operasi Kawalan Jauh pelbagai Sistem CNC. It supports users to
customize programming and develop button functions to realize remote
control of various functions on the CNC system; it supports users to
customize programming and develop display content to realize dynamic
display of system status; the remote control comes with a rechargeable
battery and supports Type-C interface charging.

2.Ciri -ciri produk

1. Menggunakan teknologi komunikasi tanpa wayar 433MHz, Operasi tanpa wayar
jarak adalah 80 meter;
2. Menggunakan fungsi melompat frekuensi automatik, 32 set jauh jauh tanpa wayar
Pengawal boleh digunakan pada masa yang sama tanpa menjejaskan satu sama lain;
3. Sokongan 12 Pengaturcaraan butang tersuai;
4. Support 2.8-inch screen, display content custom programming;
5. Sokongan 1 6-speed axis selection switch, which can be custom programmed;
6. Sokongan 1 7-speed magnification switch, which can be custom programmed;
7. Sokongan 1 Handwheel elektronik, 100 pulses/turn;
8. Support standard Type-C charging; 5Spesifikasi Pengisian V-2A; battery
specification 18650/12580mWh battery.

3.dan kesulitan seperti penyeretan kabel dan kesan minyak dielakkan

4. Spesifikasi produk

5.Pengenalan Fungsi Produk

Nota：
①Power switch：
Control hand wheel to open and close

②Enable buttons on both sides：
The enabling button must be pressed to crank the hand wheel;

③Custom button area
12 buttons arranged in 3X4, Pengaturcaraan yang ditentukan oleh pengguna;

④Axis selection, magnification switch
1 6-position axis selection switch, which can be customized and programmed;
1 7-position ratio switch, which can be customized and programmed

⑤ Emergency stop switch:
Handwheel emergency stop switch;

⑥Display area:
Can display current power, signal, and customized display content;

⑦Electronic hand wheel：
1 Handwheel elektronik, 100 pulses/turn.

⑧Charging port:

Built-in rechargeable battery, charged using Type-C charger, Mengecas Voltan 5V,
Semasa 1A-2A; charging time 7 Jam;

6.Rajah Aksesori Produk

7.Panduan Pemasangan Produk

1. Insert the USB receiver into the computer, komputer akan secara automatik
recognize and install the USB device driver without manual installation;
2. Masukkan kawalan jauh ke dalam pengecas. Setelah bateri dicas sepenuhnya, turn
on the power switch, turn on the remote control, and the display shows normal, which
means the power-on is successful;
3. After powering on, you can perform any button operation. The remote control can
support dual button operation at the same time. When you press any button, a black
square will appear next to the signal on the remote control, indicating that the button
is valid.

8.Product Operation Instructions
Before product development and use, you can use the Demo software we provide to test
the buttons and display of the remote control, or use the Demo as a reference routine for
future programming development;
Before using the Demo software, please plug the USB receiver into the computer, make
sure the remote controller has sufficient power, Hidupkan suis kuasa, and then use it;
Apabila sebarang butang di kawalan jauh ditekan, the test software Demo will display the
corresponding key value. Selepas melepaskannya, paparan nilai kunci hilang, indicating that
the button upload is normal.

 

9.Penyelesaian Masalah Produk

 

10. Penyelenggaraan dan penjagaan

1. Sila gunakannya dalam persekitaran yang kering dengan suhu dan tekanan normal untuk dilanjutkan
hayat perkhidmatan;
2. Jangan gunakan objek tajam untuk menyentuh kawasan utama untuk melanjutkan hayat perkhidmatan kunci;
3. Sila pastikan kawasan utama bersih untuk mengurangkan pakaian utama;
4. Elakkan memerah dan jatuh menyebabkan kerosakan pada kawalan jauh;
5. Sekiranya tidak digunakan untuk masa yang lama, please remove the battery and store the remote control and
battery in a clean and safe place;
6. Pay attention to moisture-proof during storage and transportation.

11.Safety Information

1. Please read the instructions carefully before use. Non-professionals are prohibited
from operating.
2. Please use the original charger or a charger produced by a regular manufacturer with
the same specifications.
3. Please charge in time to avoid incorrect operation due to insufficient power causing
the remote control to be unresponsive.
4. If repair is required, please contact the manufacturer. If the damage is caused by
self-repair, the manufacturer will not provide warranty.