Deskrizzjoni
1. Introduzzjoni tal-Prodott
The crawler vehicle rope saw automatic cutting remote control is suitable for crawler rope saw cutting machines. It adopts 485ModbusRTU protocol to control the speed start and front and rear left and right direction control of the left and right crawler inverters, as well as the large motor frequency conversion RTU protocol to control the speed start and front and rear left and right direction control of the left and right crawler inverters, and the large motor frequency conversion over-current analysis and comparison, automatically adjust the left and right crawler speeds in real time to achieve automatic cutting function.
2. Karatteristiċi tal-prodott
1. Adotta 433MHz Teknoloġija tal-Komunikazzjoni Wireless, Id-distanza ta 'operazzjoni bla fili hija 100 miters.
2. Tadotta funzjoni awtomatika tal-qbiż tal-frekwenza, użu 32 sets of wireless remote controllers at the same time, mingħajr ma taffettwa lil xulxin.
3. Support all inverters with 485-Modbus RTU protocol. The inverter brands that have been adapted include:Shanghai Xielin, Fuji, Inovance, Zhongchen, INVT, Anchuanda. If the brand is not ada please contact us for customization.
4. Support large motor inverter start, speed regulation, and current reading.
5. Support left and right crawler inverter speed regulation, start, front and back left and right control.
6. Support left and right crawler inverter straight line correction to keep the machine moving in a straight line.
7. Support rope saw automatic cutting function, automatically adjust the left and right crawler speed in real time according to the large motor current information.
8. Fl-istess ħin, it is compatible with direct IO output to control the start and stop of the motor, and analog voltage output to control the motor speed.
3. Speċifikazzjonijiet tal-prodott
4. Introduzzjoni tal-funzjoni tal-prodott
Noti:
①Display tal-iskrin:
②Swiċċ tal-mod:
Using a 2-level switch, it is possible to switch between automatic and manual modes, and the corresponding mode will be displayed on the screen for switching.
③ Enable:
Buttuni kombinati, xi operazzjonijiet jeħtieġu li żżomm il-buttuna ta 'attivazzjoni għal tħaddim, please refer to the instructions for each switch for details.
④ Large motor switch:
Bl-użu ta 'swiċċ ta' reset bi 3 veloċità, il-ġbid ta 'dan is-swiċċ jista' jikkontrolla r-rotazzjoni 'l quddiem u b'lura tal-mutur kbir. Wara li ħarġuha, l-istat se jibqa, u se jkun hemm wirjiet korrispondenti fuq l-iskrin. The t arrow indicates forward rotation, and the y arrow indicates reverse rotation.
⑤Swiċċ bil-mutur żgħir 'il quddiem/reverse:
Using a 3-speed self-locking switch, pulling this switch can control the small motor to move forward and backward. The corresponding display will show on the screen, with the t arrow indicating forward and the ↓ arrow indicating backward.
⑥Remote control power switch:
L-iskrin tal-wiri tal-kontroll mill-bogħod huwa mixgħul.
⑦ small motor turning switch:
Bl-użu ta 'swiċċ ta' reset bi 3 veloċità, meta jitħaddmu manwalment, il-mutur żgħir jista 'jiġi kkontrollat biex idur lejn ix-xellug jew il-lemin. Ladarba rilaxxati, the remote control will automatically stop this action.When in the forward state, turn this switch and the corresponding display will appear on the screen.The + arrow indicates left turn, and the – arrow indicates right turn.When in reverse mode, turn this switch and the corresponding display will appear on the screen.The + arrow indicates left turn, and the – arrow indicates right turn.Press and hold the enable button, then turn this switch to perform a stationary turning function, making the turn faster.
⑧ Regolazzjoni tal-veloċità tal-mutur kbir:
Bl-użu ta 'pulm ta' encoder multi turn, rotate the knob to adjust the speed S1 of the large motor For every 1 grid rotation, il-valur tal-veloċità tal-mutur kbir jinbidel b'madwar 0.2 unitajiet, and rapid rotation can quickly modify the speed value of the large motor.
9 Small motor speed regulation (linear correction):To use the multi turn encoder knob, fil-mod manwali, for every 1 turn of the knob, the speed value of the small motor changes by approximately 0.1 unitajiet. Fast rotation can quickly modify the speed value of the small motor.
Fil-modalità awtomatika, press the enable button and rotate 1 grilja kull darba. The speed limit value F of the small motor changes by approximately 0.1 unitajiet. Rapid rotation can quickly modify the speed limit value of the small motor.Press the enable button, turn the knob to the right, and the straight line correction display shows D f: xellug. Each rotation of the knob increases by 1 unità; Dawwar il-pum tax-xellug, wiri tal-korrezzjoni tal-linja dritta: Df: dritt. Each rotation of the knob increases by 1 unità, and each correction unit corresponds to a motor speed control AVI voltage of about 0.02 V.
5. Dijagramma Aċċessorja tal-Prodott
6. Gwida għall-Installazzjoni tal-Prodott
6.1 Passi ta' Installazzjoni tal-Prodott
1. Install the receiver in the electrical cabinet through the buckle on the back, or install it in the electrical cabinet through the screw holes at the four corners of the receiver.
2. Irreferi għad-dijagramma tal-wajers tar-riċevitur tagħna, compare your on-site equipment, and connect the equipment to the receiver through wires.
3. Wara li r-riċevitur jiġi ffissat, L-antenna mgħammra mar-riċevitur għandha tkun konnessa, u t-tarf ta 'barra ta' l-antenna għandu jiġi installat jew imqiegħed barra l-kabinett elettriku. Huwa rrakkomandat li tpoġġiha fuq il-parti ta 'fuq tal-kabinett elettriku għall-aħjar effett tas-sinjal. It is forbidden to leave the antenna unconnected or place the antenna inside the electrical cabinet, which may cause poor signal and unusable.
4. Fl-aħħarnett, install the battery in the remote control, issikka l-għatu tal-batterija, and then turn on the power switch of the remote control. After the remote control display shows the normal working interface, you can perform remote control operation.
6.2 Dimensjonijiet ta 'installazzjoni tar-riċevitur
6.3 Dijagramma ta 'referenza tal-wajers tar-riċevitur
7. Istruzzjonijiet dwar l-Operazzjoni tal-Prodott
7.1 Settings tal-Parametri tal-Kontroll Remot
How to enter the background parameters of the remote controller: turn the mode switch to manual mode, aġġusta l-veloċità tal-mutur żgħir biex 25, jew 0, 10, 20, 40, 50, and turn the forward switch of the large motor upwards 3 times and downwards 3 drabi;
Uża l- “Kontroll tal-Veloċità tal-Mutur Żgħir” knob to turn the page, press Enable and turn the small motor speed control knob to modify the parameters; after modification, dawwar il-paġna sal-aħħar, select Save and Exit, and press the Enable button to exit the menu;
Il-parametri huma kif ġej:Kurrent massimu: large motor current feedback value range, setting range 15-200A, default 60;
Parametri tal-kontroll tal-veloċità: automatic mode small motor automatic acceleration speed, l-iżgħar l-aktar mgħaġġel, setting range 200-1500, default 1000;
Parametru ta 'deċellerazzjoni: Set the upper limit of the motor speed change allowed. Meta l-kurrent jinbidel lil hinn minn dan il-valur, it will decelerate. The smaller it is, the faster the left and right motors will decelerate. The range is 05-12, and the default is 06;
Aċċellerazzjoni A1: The larger the value, the faster the motor speed increases, range 00-06,default 01; Deċellerazzjoni A2: The larger the value, the faster the motor speed decreases, firxa 00-06, default 02;
Ippermetti r-regolazzjoni tal-veloċità: Whether the small motor speed regulation needs to be enabled, 00 is not enabled, 01 is enabled, default 01;
Startup self-locking: Whether the large motor will automatically keep self-locking after the forward and reverse switch is released, 00 is not maintained, 01 is maintained, default 01;
Maximum travel: Maximum speed of the left and right motors, firxa 10-100, default 50;
Qtugħ ta 'kurrent: Maximum cutting current, the screen displays IC value, firxa 15-160, default 30, the screen displays IC: 30. The upper limit of this parameter = maximum current x 80%;
Limitu tal-Veloċità Default: The default small motor automatic cutting speed at startup, firxa 00-100, default 10, the screen displays F1.0, this parameter is only accurate when the maximum travel is set to 50.
Wireless channel: Default is 10. When the remote control signal is unstable or there is signal interference on site, you can modify this parameter to switch channels to avoid interference;
Offset tal-Limitu tal-Veloċità: The upper limit of the automatic cutting speed of the small motor,firxa 00-200, default 60, the screen displays 6.0; Display value upper limit = speed limit offset × 0.1;
Ospitanti massimu: The maximum speed of the large motor, firxa 10-100, default 50;
Mbus device ( obbligatorju ): large motor inverter model selection, firxa 00-03, default 03;
00- Shanghai Xielin 01 Fuji
02- INVT 03 Inovance（Zhongchen, Robicon）
Tagħmir SBUS (obbligatorju): Għażla tal-mudell tal-konvertitur tal-frekwenza tal-mutur żgħir, firxa 00-05, default 03;
00- Shanghai Xielin 01 Fuji
02- INVT 03 Inovance（Zhongchen, Robicon）
04-Anchuanda 05-Xejn
8. Issolvi l-problemi tal-prodott
7.2 L-issettjar tal-parametri tal-konvertitur tal-frekwenza
1. Għażla tas-sors tal-kmand: Kanal tal-kmand tal-komunikazzjoni
2. Għażla tas-sors tal-frekwenza prinċipali: komunikazzjoni mogħtija
3. Rata baud: 19200
4. Format tad-data: L-ebda verifika, format tad-data<8-N-1>
5. Indirizz lokali: Issettja l-konvertitur tal-frekwenza tax-xellug għal 1, il-konvertitur tal-frekwenza dritt li 2, and the large motor frequency converter to 3
7.3 Istruzzjonijiet ta' Operazzjoni ta' Kontroll Remot
1. Qawwa fuq il-magna, ixgħel il-kontroll mill-bogħod, enter the remote control background, set the remote control background parameters, mainlyIt is to set the models of small and large motor frequency converters (skip this step if the machine manufacturer has already set them);
2. Issettja l-parametri tal-konvertitur tal-frekwenza (aqbeż dan il-pass jekk il-manifattur tal-magna diġà stabbilixxah);
3. Issettja l-kontroll mill-bogħod għall-mod manwali, and then use the remote control to move the machine to the working position;
4. Fil-modalità manwali, set the IC value for the cutting current of the large motor and the speed of the large motor;
5. Aqleb għall-modalità awtomatika u ssettja l-valur F tal-limitu tal-veloċità tat-tqattigħ għall-mutur żgħir;
6. Fil-modalità awtomatika, dawwar is-swiċċ tal-mutur kbir biex 'il quddiem biex tibda l-mutur kbir, and then turn the small motor switch to forward or reverse. The remote control enters automatic cutting mode and begins cutting.
9.Manutenzjoni
1. Jekk jogħġbok użah f'ambjent xott f'temperatura tal-kamra u pressjoni biex testendi l-ħajja tas-servizz tagħha.
2. Jekk jogħġbok evita li tuża f'ambjenti anormali bħalma huma x-xita u l-bżieżaq tal-ilma biex testendi l-ħajja tas-servizz.
3. Jekk jogħġbok żomm il-kompartiment tal-batterija u ż-żona shrapnel tal-metall nadifa.
4. Jekk jogħġbok evita li tagħmel ħsara lill-kontroll mill-bogħod minħabba l-għasir u l-waqgħa.
5. Jekk ma jintużax għal żmien twil, please remove the battery and store the remote control and battery in a clean and safe place.
6.Matul il-ħażna u t-trasport, Għandha tingħata attenzjoni lill-umdità u r-reżistenza tax-xokk.
10. Informazzjoni dwar is-sigurtà
1. Jekk jogħġbok aqra l-istruzzjonijiet bir-reqqa qabel l-użu u tipprojbixxi mhux professjonisti milli joperaw.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by insufficient power, li jista’ jwassal biex il-kontroll mill-bogħod ma jkunx jista’ jaħdem.
3. Jekk hija meħtieġa t-tiswija, Jekk jogħġbok ikkuntattja lill-manifattur. Jekk il-ħsara hija kkawżata minn tiswija personali, Il-manifattur ma jipprovdix garanzija
