1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 mita.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, Kusankhidwa kwa Axis, magnification, and other information.
3. Kuthandizira batani la EMPTRY, Sinthani zojambula za IO, and the hand wheel shutdown emergency stop is still valid.
4. Amathandizira 6 mabatani, switch IO signals, and can output signals to the system through IO wiring or communication.
Mabuku a SubleChic Dracenheel
Kaonekeswe
1. Kuyambitsa Zoyambitsa
Electronic handwheel is used for manual guidance, kukhazikika, tool alignment, and other operations on CNC machine tools. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, magnification, buttons, andother signals through communication.
2.Zogwira Ntchito Zogwirira Ntchito
1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 mita.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, Kusankhidwa kwa Axis, magnification, and other information.
3. Kuthandizira batani la EMPTRY, Sinthani zojambula za IO, and the hand wheel shutdown emergency stop is still valid.
4. Amathandizira 6 mabatani, switch IO signals, and can output signals to the system through IO wiring or communication.
5. Amathandizira 6 kapena 8 Axis Control, with switch IO signals that can be output to the system through IO wiring or communication.
6. Amathandizira 3 kapena 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Support pulse encoder, 100 ma pullese / nthawi, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.
3. Zithunzi Zogulitsa
| Handwheel working power supply voltage | DC24V/1A |
| Wolandila Mphamvu ya Mphamvu ya Mphamvu | DC24V/1A |
| Receiver IO output load range | DC24V |
| Hand wheel end cable length | 10m |
| Receiver end cable length | 1m |
| Receiver end network cable length | 3m |
| Operating temperature | -25℃<X<55℃ |
| Anti-fall height | 1m |
| Custom Button Quantity | 6 |
| Product dimensions | 233*90.7*77.4（mm） |
4.Zolemba Zoyambitsa
Zindikirani:
Emergency stop button:
Kanikizani batani la Expmenty, ndi zigawo ziwiri zadzidzidzi zotuluka ziwo pa wolandirayo zidzasambitsidwa, ndipo ntchito zonse zam'manjazi zidzakhala zosavomerezeka.
After releasing the emergency stop, Kutulutsa kwadzidzidzi kwa IO pa wolandila kwatsekedwa, and all functions of the handwheel are restored.
② Screen display:
PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 mabatani, chilichonse chogwirizana ndi IO yotulutsa mawu pa wolandila, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Kanikizani ndikusunga batani, gwedezani mawonekedwe, Imatulutsa chizindikiro, and control the movement of the machine axis.
⑧ Handwheel cable:
Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.
5. Chithunzi chojambulidwa chogulitsa
6. Chitsogozo Choyambitsa Chogulitsa
6.1 Njira Zogulitsa Zamalonda
6.1 Njira Zogulitsa Zamalonda
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Onani zojambula zathu zolandila ndikufanizira ndi zida zanu. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. Pambuyo pokonza wolandila, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.
6.2 Kulandila Kukhazikitsa
6.3 Installation dimensions of aviation plugs
6.4 Wolandila Wolemba Wolemba
7.Malangizo Othandizira Product
7.Malangizo Othandizira Product
1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.
2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.
3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.
4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Sankhani kukula: Switch the magnification switch and select the magnification level you need.
7. Kusuntha: Kanikizani ndikusunga batani, Sankhani kusintha kwa axis kusankha, Sankhani kusintha, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Kanikizani batani la Expmenty, Kutulutsa kofananira kwadzidzidzi kwa IOO yotulutsidwa kwa wolandirayo idzasinthidwa, Ntchito yam'manja idzakhala yolumala, kumasula batani ladzidzidzi, Kutulutsa kwadzidzidzi kwa IO kumatsekedwa, ndipo ntchito yam'manja idzabwezeretsedwa.
8.Kufotokozera kwachitsanzo
① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : imayimira chiwerengero cha ma axis osankhidwa, represents axes, and represents
axes.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, ndipo b zikuyimira chizindikiro chotulutsa.
9.Product trouble shooting
10.Kupitiliza
1. Chonde gwiritsani ntchito pamalo owuma firiji ndi kukakamizidwa kuti muwonjezere moyo wake.
2. Chonde pewani kugwiritsa ntchito malo achilendo monga mvula ndi madzi amadzi kuti muwonjezere moyo wa ntchito.
3. Chonde yesetsani kuwoneka kwa dzanja lam'madzi kuti lizitipatsa moyo wake.
4. Chonde pewani kufinya, kugwa, kupumira, ndi. Pofuna kupewa kuwonongeka kwa zinthu zomwe zili mkati mwa zingwe zam'madzi kapena zolondola.
5. Ngati sichigwiritsidwa ntchito kwa nthawi yayitali, please store the handwheel in a clean and safe place.During storage and transportation, Chisamaliro chiyenera kulipidwa ndi chinyezi komanso chodabwitsa.
11. Chidziwitso cha Chitetezo
1. Chonde werengani malangizowo musanagwiritse ntchito ndikuletsa omwe alibe akatswiri.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Ngati kukonza ndikofunikira, Chonde funsani wopanga. Ngati kuwonongeka kumayambitsidwa ndi kudzipatula, Wopanga sadzapereka chitsimikizo
