instruments and apparatuses

Fa'asolo ile anotusi|instruments and apparatuses
  •

    Alamanuia uaealesi pulea mamao DH01R-4W-26K

    Application:fa'aaogaina mo meafaigaluega fa'apisinisi eseese

    1.maualuga 26 Uumea masini otometi uelo ma uelo operator. Liliu Rolls 1. Fa'aaogaina fa'atekonolosi fe'avea'i fa'avave. 2.O le mamao o felauaiga e leai se pa puipui 200 mita. 3. maualuga 4 ala o analog 0-10V galuega faatino (fa'aaliga avanoa e mafai ona fa'apitoa): lagolago 2 ala o fa'alautele fa'afuafua fa'afuainumera potentiometer; 4. 2 mea fa'aoga analog; ma fa'aalia i luga o le fa'atonu mamao, e mafai ona fa'apitoa le fa'aaliga fa'aaliga. 5. 1 fa'alavelave fa'afuase'i tu'u fa'alava fa'afeso'ota'i masani tapuni.
    • Lafoaia le faʻaaogaina o le eletise
    • Faigofie e faaaoga
    Fa'amatalaga

  • Uaea vaai masini tipi otometi uaealesi pulea mamao DH12S-P6S

    Application:Specially used for crawler wire saw machine

    1.Supports automatic cutting function, automatically adjusts cutting speed according to motor current feedback 2.Barrier-free transmission distance is 200 mita. 3. Support DC driver. 4. Supports multiple cutting parameter settings, such as cutting current, cutting speed limit, etc.. 5. Supports switching between wire saw and blade saw modes. Different cutting parameters can be set in different modes.
    • Lafoaia le faʻaaogaina o le eletise
    • Faigofie e faaaoga
    Fa'amatalaga

  • Va'ai uaea fe'ei masini otometi fa'atonu mamao mamao DH12S-LD

    Application:Specially used for crawler wire saw machine

    1.Supports automatic cutting mode, automatically adjusts the walking speed of the small motor according to the large motor current, and achieves automatic cutting control. 2.O le mamao o felauaiga e leai se pa puipui 200 mita. 3. Supports dual speed regulation for large motors and small motors. 4. Support small motor turning in place. 5. Supports left and right wheel small motor linear correction.
    • Lafoaia le faʻaaogaina o le eletise
    • Faigofie e faaaoga
    Fa'amatalaga

  • malosi fa'alavelave fa'alavelave Faigofie ona fa'aoga – ATWGP 12 axis

    £650.00
    malosi fa'alavelave fa'alavelave Faigofie ona fa'aoga - ATWGP-12 axis
    • 40malosi fa'alavelave fa'alavelave Faigofie ona fa'aoga
    • malosi fa'alavelave fa'alavelave Faigofie ona fa'aoga、malosi fa'alavelave fa'alavelave Faigofie ona fa'aoga
    • Faigofie e faaaoga
    Fa'aopoopo i le fata Fa'amatalaga

  • Tele-sui alamanuia uaealesi mamao puleaDH05 DH05

    £550.00

    Application:E masani ona faʻaaogaina i meafaigaluega faʻapisinisi, alamanuia uelo, alamanuia tipi, pisinisi maina, etc..

    1.Fa'aaogaina ole 433MHZ ole fa'asalalauina ole alalaupapa, fa'atekonolosi fa'a'ave'ave fa'asolo mamao mamao, mamao felauaiga e leai se pa puipui o 200 mita 2. Le tutusa ituaiga o faʻaoga lagolago 32 seti o fa'atonu mamao uaealesi e fa'aoga i le taimi e tasi, e aunoa ma le faalavelave o le tasi i le isi 3. Lagolago 14 ki fa'amau, ta'ito'atasi ta'ito'atasi le fa'atonutonuina o le fa'aliliuina o galuega a 14 LEAI togi i luga o le tali 4. Lagolago 2 fa'aulu fa'aoso ki fa'aoga, e mafai e ia mea taitasi ona pulea 1 seti o suiga o galuega faatino i luga o le tali 5.Low-mana mamanu; 2 AA maa, fa'aoga masani mo 1 masina 6.Waterproof mamanu ma le IP67 fua fa'atatau
    • Lafoaia le faʻaaogaina o le eletise
    • Faigofie e faaaoga
    Fa'aopoopo i le fata Fa'amatalaga

  • Fa'ameamea fa'ameamea fa'aoloa fola fa'atonutonu mamao DH22-2R-7K

    £260.00

    Application:Fa'apitoa fa'aoga mo le fa'ameamea fa'ameamea fa'ameamea

    1.Fa'aaogā fa'atekonolosi fe'avea'i ma 32 seti o meafaigaluega e mafai ona faʻaogaina i le taimi e tasi i luga o le nofoaga e aunoa ma le faʻalavelaveina o le tasi ma le isi. 2.O le mamao o felauaiga e leai se pa puipui 200 mita. 3. Uumea masini otometi uelo ma uelo operator. Liliu Rolls 1. Fa'aaogaina fa'atekonolosi fe'avea'i fa'avave 2 ala analog: 0-10V fa'aigoa fa'aoso eletise. 4. Lagolago 7-auala fesuia'i fa'alava galuega, Uumea masini otometi uelo ma uelo operator. Liliu Rolls 1. Fa'aaogaina fa'atekonolosi fe'avea'i fa'avave: Uumea masini otometi uelo ma uelo operator. Liliu Rolls 1. Fa'aaogaina fa'atekonolosi fe'avea'i fa'avave. 5. Uumea masini otometi uelo ma uelo operator. Liliu Rolls 1. Fa'aaogaina fa'atekonolosi fe'avea'i fa'avave 1 alavai fa'alavelave fa'afuase'i taofi galuega, uta gafatia AC 3A/250V po DC 5A/30V. 6. Uumea masini otometi uelo ma uelo operator. Liliu Rolls 1. Fa'aaogaina fa'atekonolosi fe'avea'i fa'avave, fa'aali 2 galuega faatino ma 7 sui tulaga.
    • Lafoaia le faʻaaogaina o le eletise
    • Faigofie e faaaoga
    Fa'aopoopo i le fata Fa'amatalaga

  • malosi fa'alavelave fa'alavelave Faigofie ona fa'aoga – malosi fa'alavelave fa'alavelave Faigofie ona fa'aoga

    £650.00
    malosi fa'alavelave fa'alavelave Faigofie ona fa'aoga - malosi fa'alavelave fa'alavelave Faigofie ona fa'aoga
    • 40malosi fa'alavelave fa'alavelave Faigofie ona fa'aoga
    • malosi fa'alavelave fa'alavelave Faigofie ona fa'aoga、malosi fa'alavelave fa'alavelave Faigofie ona fa'aoga
    • Faigofie e faaaoga
    Fa'aopoopo i le fata Fa'amatalaga

  • Alamanuia uaealesi pulea maotua mo autilo ,Uumea masini otometi uelo ma uelo operator. Liliu Rolls 1. Fa'aaogaina fa'atekonolosi fe'avea'i fa'avave

    £558.00

    Application:u'umea masini otometi uelo ma uelo fa'agaioiga. Liliu Rolls

    1.Uumea masini otometi uelo ma uelo operator. Liliu Rolls 1. Fa'aaogaina fa'atekonolosi fe'avea'i fa'avave, Uumea masini otometi uelo ma uelo operator. Liliu Rolls 1. Fa'aaogaina fa'atekonolosi fe'avea'i fa'avave.

    2.I totonu o le vaega galue e tasi,Uumea masini otometi uelo ma uelo operator. Liliu Rolls 1. Fa'aaogaina fa'atekonolosi fe'avea'i fa'avave.

    3.Uumea masini otometi uelo ma uelo operator. Liliu Rolls 1. Fa'aaogaina fa'atekonolosi fe'avea'i fa'avave 4 Uumea masini otometi uelo ma uelo operator. Liliu Rolls 1. Fa'aaogaina fa'atekonolosi fe'avea'i fa'avave, 0-10Uumea masini otometi uelo ma uelo operator. Liliu Rolls 1. Fa'aaogaina fa'atekonolosi fe'avea'i fa'avave. 4.Uumea masini otometi uelo ma uelo operator. Liliu Rolls 1. Fa'aaogaina fa'atekonolosi fe'avea'i fa'avave 18 Uumea masini otometi uelo ma uelo operator. Liliu Rolls 1. Fa'aaogaina fa'atekonolosi fe'avea'i fa'avave, Uumea masini otometi uelo ma uelo operator. Liliu Rolls 1. Fa'aaogaina fa'atekonolosi fe'avea'i fa'avave: Uumea masini otometi uelo ma uelo operator. Liliu Rolls 1. Fa'aaogaina fa'atekonolosi fe'avea'i fa'avave 5.Uumea masini otometi uelo ma uelo operator. Liliu Rolls 1. Fa'aaogaina fa'atekonolosi fe'avea'i fa'avave, Uumea masini otometi uelo ma uelo operator. Liliu Rolls 1. Fa'aaogaina fa'atekonolosi fe'avea'i fa'avave,Uumea masini otometi uelo ma uelo operator. Liliu Rolls 1. Fa'aaogaina fa'atekonolosi fe'avea'i fa'avave 18 Uumea masini otometi uelo ma uelo operator. Liliu Rolls 1. Fa'aaogaina fa'atekonolosi fe'avea'i fa'avave 6.Lafoaia le faʻaaogaina o le eletise ,2pcs AA maa e mafai ona faʻaogaina 1 masina i le tulaga masani
    • Lafoaia le faʻaaogaina o le eletise
    • Faigofie e faaaoga
    Fa'aopoopo i le fata Fa'amatalaga

  • Alamanuia uaealesi pulea maotua mo autilo ,masini uelo DH12S–2R-AT

    £470.00

    Features: 1. O le autu afi tipiina taimi nei mafai ona seti 2. Otometi pulea o vavaeina saosaoa 3. Otometi lava vaʻaia vavaeina mea e iloa ai unmanned tiute 4. Faigofie ma faigofie e faʻaaoga 5. Ma retracting galuega tauave 6. Ma autu autu afi puipuiga galuega tauave

    • 200M pa puipui lafoina
    • Lafoaia le faʻaaogaina o le eletise
    • Faigofie e faaaoga
    Fa'aopoopo i le fata Fa'amatalaga

  • Alamanuia uaealesi pulea maotua mo autilo ,masini uelo DH02S-AT

    £254.00

    Features: 1. O le autu afi tipiina taimi nei mafai ona seti 2. Otometi pulea o vavaeina saosaoa 3. Otometi lava vaʻaia vavaeina mea e iloa ai unmanned tiute 4. Faigofie ma faigofie e faʻaaoga 5. Ma retracting galuega tauave 6. Ma autu autu afi puipuiga galuega tauave

    • 200M pa puipui lafoina
    • Lafoaia le faʻaaogaina o le eletise
    • Faigofie e faaaoga
    Fa'aopoopo i le fata Fa'amatalaga

  • mach 3 faiga ma komepiuta SP6

    £576.00

    Tulaga lelei: Faiga fa'akomepiuta vasega fa'apisinisi Lagolago VGA atinaʻe Lagolago 6 Uafu USB WIN8 muai fa'apipi'i fa'apipi'i, e le afaina le fa'apipi'i sa'o i le eletise Fa'amanatuga tisiki malo 32G Ulufale IO uafu: 24 Output IO uafu: 16 Lagolago le fa'atulagaina o kata e tasi po'o le fa'atulagaina o kata lua i le loto

    • polokalame MACH3
    • Lagolago MAX 6-axis
    • Faiga tu'ufa'atasi
    Fa'aopoopo i le fata Fa'amatalaga

  • CNC systemEstop wireless remote contol 6 Axis CNC wireless handwheel pendant XWGP

    £508.00
    • E-stop button 6 fa'amau fa'amau
    • Anti-interference design, mautu ma faatuatuaina
    • mamao uaealesi o 40 mita
    Fa'aopoopo i le fata Fa'amatalaga

  • Alamanuia uaealesi pulea maotua mo autilo ,masini uelo DH01R

    £1,151.00

    Application:u'umea masini otometi uelo ma uelo fa'agaioiga. Liliu Rolls

    1.Fa'aaoga le 433MHZ fa'asalalau fa'alava.

    2.I totonu o le vaega galue e tasi,e mafai ona lagolagoina 32pcs meafaigaluega faʻaaogaina i le taimi e tasi 3.LCD mataitu e mafai ona faʻaalia le taimi nei uelo ,voltage and speed 4.Support 4lines 250v/3A relay output.to control contactor achieve motor clock wise/counter-clock wise 5.Support 1lines 0-10v analog voltage output to control VFD speed adjustment 6.1 line normal open E-stop signal output 7.Lafoaia le faʻaaogaina o le eletise ,2pcs AA maa e mafai ona faʻaogaina 1 masina i le tulaga masani
    • 200M pa puipui lafoina
    • Lafoaia le faʻaaogaina o le eletise
    • Faigofie e faaaoga
    Fa'aopoopo i le fata Fa'amatalaga

  • Alamanuia uaealesi pulea maotua mo autilo ,masini uelo DH12S-2R-4K

    £254.00

    Application:u'umea masini otometi uelo ma uelo fa'agaioiga. Liliu Rolls

    1.Fa'aaoga le 433MHZ fa'asalalau fa'alava.

    2.I totonu o le vaega galue e tasi,e mafai ona lagolagoina 32pcs meafaigaluega faʻaaogaina i le taimi e tasi 3.LCD mataitu e mafai ona faʻaalia le taimi nei uelo ,voltage and speed 4.Support 4lines 250v/3A relay output.to control contactor achieve motor clock wise/counter-clock wise 5.Support 1lines 0-10v analog voltage output to control VFD speed adjustment 6.1 line normal open E-stop signal output 7.Lafoaia le faʻaaogaina o le eletise ,2pcs AA maa e mafai ona faʻaogaina 1 masina i le tulaga masani
    • 200M pa puipui lafoina
    • Lafoaia le faʻaaogaina o le eletise
    • Faigofie e faaaoga
    Fa'aopoopo i le fata Fa'amatalaga

  • New simple wireless handwheel EWGP for FANUC

    £145.00
    • Connect three rows of DB15 plugs and two rows of DB15 plugs
    • Anti-interference design, mautu ma faatuatuaina
    • mamao uaealesi o 40 mita
    Fa'aopoopo i le fata Fa'amatalaga

  • XHC Factory tau NC studio wireless cnc mpg WHB03B

    £113.00
    • Support NC studio system
    • lagolago 10 fa'amau fa'amau
    • mamao uaealesi o 40 mita
    Fa'aopoopo i le fata Fa'amatalaga

  • 6 Axis MACH3 USB fa'afoe uaealesi mpg WHB04B-6

    £124.00
    Fa'ata'ita'iga: WHB04B-4 4 Tu'u WHB04B-6 6 Tu'u Polokalama fa'aoga: MACH3 Talosaga Pulea pepa talosaga alamanuia :CNC masini tipi. CNC router.Machining Center.Mechanical arm.Automated production equipment 1.Leitio Auala: 433MHZ,ISM,TX mana 10DB,RX sensitivity -98DB 2.100pulse per round MPG, lagolago 10 fa'amau fa'amau 3.LCD monitor will display X/Y/Z/A/B/C mechanical and workpiece coordinates, lagolago 3 axis coordinates display in one time RF support 64 alavai, Each channel gap 1Mhz 4. Lagolago Fa'asalalauga fa'aoso oso, Maumau ma faatuatuaina 5.One potu e mafai ona tamoe 64pcs MPG i le taimi lava e tasi, and will not affect each other due to frequency hopping function 6.100PPR MPG function, ki e o'o atu i le 10pcs

    LCD mon itor display:Tau o le saoasaoa o spindle, fa'agaioiina le tau fafaga

    • Lagolago MACH3 faiga
    • lagolago 10 fa'amau fa'amau
    • mamao uaealesi o 40 mita
    Fa'aopoopo i le fata Fa'amatalaga

  • 4 Axis MACH3 USB fa'afoe uaealesi mpg WHB04B

    £113.00
    Fa'ata'ita'iga: WHB04B-4 4 Tu'u WHB04B-6 6 Tu'u Polokalama fa'aoga: MACH3 Talosaga Pulea pepa talosaga alamanuia :CNC masini tipi. CNC router.Machining Center.Mechanical arm.Automated production equipment 1.Leitio Auala: 433MHZ,ISM,TX mana 10DB,RX sensitivity -98DB 2.100pulse per round MPG, lagolago 10 fa'amau fa'amau 3.LCD monitor will display X/Y/Z/A/B/C mechanical and workpiece coordinates, lagolago 3 axis coordinates display in one time RF support 64 alavai, Each channel gap 1Mhz 4. Lagolago Fa'asalalauga fa'aoso oso, Maumau ma faatuatuaina 5.One potu e mafai ona tamoe 64pcs MPG i le taimi lava e tasi, and will not affect each other due to frequency hopping function 6.100PPR MPG function, ki e o'o atu i le 10pcs

    LCD mon itor display:Tau o le saoasaoa o spindle, fa'agaioiina le tau fafaga

    • Lagolago MACH3 faiga
    • lagolago 10 fa'amau fa'amau
    • mamao uaealesi o 40 mita
    Fa'aopoopo i le fata Fa'amatalaga

  • 4 axis MACH4 USB CNC pule kata

    £194.00
    Polokalama fa'aoga: MACH4 Talosaga Pulea pepa talosaga alamanuia :CNC masini tipi. CNC router.Machining Center.Mechanical arm.Automated production equipment. Features: 1.Lagolago atoatoa uma lomiga Mach4 2.Full lagolago mo USB vevela-swappable, o le kata o le Mataʻituina tulaga fesoʻotaʻiga USB i soʻo se taimi. 3.Supports MAX 6-axis 4.Maximum step-pulse frequency is 2000KHz 5. Status indicator LED can be useful to show the USB connection, ma stauts galue e ala i le emo. 6.16 input IO+8output IO, support spindle feedbackfunction, support difference output. all IO-port isolation, fa'alavelave, mautu le faatinoga
    • MACH4 faiga
    • Lagolago MAX 6-axis
    • Ole maualuga ole la'a-fa'alava ole 2000KHz
    Fa'aopoopo i le fata Fa'amatalaga

  • 3 axis MACH4 USB CNC pule kata

    £154.00
    Polokalama fa'aoga: MACH4 Talosaga Pulea pepa talosaga alamanuia :CNC masini tipi. CNC router.Machining Center.Mechanical arm.Automated production equipment. Features: 1.Lagolago atoatoa uma lomiga Mach4 2.Full lagolago mo USB vevela-swappable, o le kata o le Mataʻituina tulaga fesoʻotaʻiga USB i soʻo se taimi. 3.Supports MAX 6-axis 4.Maximum step-pulse frequency is 2000KHz 5. Status indicator LED can be useful to show the USB connection, ma stauts galue e ala i le emo. 6.16 input IO+8output IO, support spindle feedbackfunction, support difference output. all IO-port isolation, fa'alavelave, mautu le faatinoga
    • MACH4 faiga
    • Lagolago MAX 6-axis
    • Ole maualuga ole la'a-fa'alava ole 2000KHz
    Fa'aopoopo i le fata Fa'amatalaga

  • mach4 6 axis usb cnc pule kata

    £345.00
      Polokalama fa'aoga: MACH4 Talosaga Pulea pepa talosaga alamanuia :CNC masini tipi. CNC router.Machining Center.Mechanical arm.Automated production equipment. Features: 1.Lagolago atoatoa uma lomiga Mach4 2.Full lagolago mo USB vevela-swappable, o le kata o le Mataʻituina tulaga fesoʻotaʻiga USB i soʻo se taimi. 3.Supports MAX 6-axis 4.Maximum step-pulse frequency is 2000KHz 5. Status indicator LED can be useful to show the USB connection, ma stauts galue e ala i le emo. 6.16 input IO+8output IO, support spindle feedbackfunction, support difference output. all IO-port isolation, fa'alavelave, mautu le faatinoga
    • MACH4 faiga
    • Lagolago MAX 6-axis
    • Ole maualuga ole la'a-fa'alava ole 2000KHz
    Fa'aopoopo i le fata Fa'amatalaga

  • Alamanuia uaealesi masini uʻamea uʻamea DH12S-2W-12K

    £254.00

    Application:u'umea masini otometi uelo ma uelo fa'agaioiga. Liliu Rolls

    1.Fa'aaoga le 433MHZ fa'asalalau fa'alava.

    2.I totonu o le vaega galue e tasi,e mafai ona lagolagoina 32pcs meafaigaluega faʻaaogaina i le taimi e tasi 3.LCD mataitu e mafai ona faʻaalia le taimi nei uelo ,voltage and speed 4.Support 4lines 250v/3A relay output.to control contactor achieve motor clock wise/counter-clock wise 5.Support 1lines 0-10v analog voltage output to control VFD speed adjustment 6.1 line normal open E-stop signal output 7.Lafoaia le faʻaaogaina o le eletise ,2pcs AA maa e mafai ona faʻaogaina 1 masina i le tulaga masani
    • 200M pa puipui lafoina
    • Lafoaia le faʻaaogaina o le eletise
    • Faigofie e faaaoga
    Fa'aopoopo i le fata Fa'amatalaga

  • Alamanuia uaealesi u'amea masini u'amea mamao DH12S-2W-8K

    £254.00

    Application:u'umea masini otometi uelo ma uelo fa'agaioiga. Liliu Rolls

    1.Fa'aaoga le 433MHZ fa'asalalau fa'alava.

    2.I totonu o le vaega galue e tasi,e mafai ona lagolagoina 32pcs meafaigaluega faʻaaogaina i le taimi e tasi 3.LCD mataitu e mafai ona faʻaalia le taimi nei uelo ,voltage and speed 4.Support 4lines 250v/3A relay output.to control contactor achieve motor clock wise/counter-clock wise 5.Support 1lines 0-10v analog voltage output to control VFD speed adjustment 6.1 line normal open E-stop signal output 7.Lafoaia le faʻaaogaina o le eletise ,2pcs AA maa e mafai ona faʻaogaina 1 masina i le tulaga masani
    • 200M pa puipui lafoina
    • Lafoaia le faʻaaogaina o le eletise
    • Faigofie e faaaoga
    Fa'aopoopo i le fata Fa'amatalaga

  • Alamanuia uaealesi u'amea masini uelo mamao DH12S-2W-6K

    £254.00

    Application:u'umea masini otometi uelo ma uelo fa'agaioiga. Liliu Rolls

    1.Fa'aaoga le 433MHZ fa'asalalau fa'alava.

    2.I totonu o le vaega galue e tasi,e mafai ona lagolagoina 32pcs meafaigaluega faʻaaogaina i le taimi e tasi 3.LCD mataitu e mafai ona faʻaalia le taimi nei uelo ,voltage and speed 4.Support 4lines 250v/3A relay output.to control contactor achieve motor clock wise/counter-clock wise 5.Support 1lines 0-10v analog voltage output to control VFD speed adjustment 6.1 line normal open E-stop signal output 7.Lafoaia le faʻaaogaina o le eletise ,2pcs AA maa e mafai ona faʻaogaina 1 masina i le tulaga masani
    • 200M pa puipui lafoina
    • Lafoaia le faʻaaogaina o le eletise
    • Faigofie e faaaoga
    Fa'aopoopo i le fata Fa'amatalaga
Itumalo o Wenjiang

Alamanuia talosaga oloa

Itumalo o Wenjiang, Itumalo o Wenjiang 20 Fa'asolo ile anotusi. Itumalo o Wenjiang, Itumalo o Wenjiang 40 Fa'asolo ile anotusi, Itumalo o Wenjiang 10000 Itumalo o Wenjiang.

Itumalo o Wenjiang

Itumalo o Wenjiang

Fa'ailoga e maua ai tala fou ma fa'afou fa'amatalaga. Fa'ailoga e maua ai tala fou ma fa'afou fa'amatalaga, Fa'ailoga e maua ai tala fou ma fa'afou fa'amatalaga!