Sharaxaada
1.Qaabka badeecada
Qaabka: DH12S-P6S
Qalabka lagu dabaqi karo:wire saw/blade saw machine
2.jaantuska agabka alaabta
Ogow: Waxaad dooran kartaa mid ka mid ah saddexda anteeno. Anteenada koobka nuugista waa heer caadi ahaan.
3.Sharaxaad kanta kontoroolka meel fog
4.Soo bandhigida horudhaca
Main motor speed: Main: 0-50
Traveling motor speed: Line: 0-50
Maximum speed limit of automatic cutting traveling motor: Speed: 0-30
(cabirrada la isku hagaajin karo)
Automatic cutting main motor setting current: Setting: 28 (cabirrada la isku hagaajin karo)
Swing arm motor speed: Swing: 0-50
Koronto yar: Batteriga kantaroolka fog fog aad buu u yar yahay, Fadlan beddel batteriga.
Shabakad ayaa dhacday: Saxeex wireless ah ayaa la joojiyay. Fadlan hubi awoodda qaataha, Awoodda mar labaad, oo dib u bilow xakameynta fog.
5.Tilmaamaha Howlgalka Ka Hortagga Meel fog
1）Turn on the remote control
When the receiver is powered on, the D2 power light on the receiver is always on, andthe D1 signal light starts to flash; install two AA batteries in the remote control, dami beddelka korantada, and the display will show the motor speed, indicating successful startup.
2）Large motor and speed regulation/Main motor and speed regulation
Press and hold “Speed Regulation Enable”, dami “Forward/Reverse” switch to forward, and the receiver’s main motor will turn on;
Press and hold “Speed Regulation Enable”, dami “Forward/Reverse” switch to reverse, and the receiver’s main motor will reverse and turn on;Simply move the switch to the middle or reverse direction, and the main motor will stop immediately without pressing the speed control enable button;Rotate the “big motor” knob to adjust the speed regulation voltage of the receiver’s main motor inverter to 0-10V;
3）Traveling motor
Press and hold “Speed Adjustment Enable”, dami “Forward/Reverse” switch to forward or backward, and the walking motor will move at a high speed of 50;
4）Swing arm motor and speed regulation
Turn the “Swing Arm/Reverse” switch to swing arm or retreat, and the receiver’s swing arm motor starts; then rotate the “Speed Adjustment” knob to adjust the swing arm motor speed;
Press and hold “Speed Adjustment Enable”, and then pull the “Swing Arm/Reverse” switch, the swing arm motor will move at a high speed of 50;
5）Travel motor speed limit adjustment
Riix oo hay “speed adjustment enable” badhanka oo wareeji “speed adjustment” to adjust the maximum speed limit of the traveling motor during automatic cutting;
6） Automatic cutting
The first step is to start the main motor; the second step is to adjust the maximum speed limit of the walking motor; the third step is to move the “forward/reverse” switch forward or backward to enter the automatic cutting mode;
7） Parameter menu (Isticmaalayaasha waa ka mamnuuc inay wax ka beddelaan iyada oo aan fasax laga helin)
Enter the parameter menu:Habka gacanta, when the main motor speed is 0, riix dhinaca hore ee hore / gadaal u roga saddex jeer oo isku xigta, and then push it down three times in a row to enterthe parameter menu;
Ka bax liiska xuduudaha: Turn the speed adjustment knob, select save or not save, and press the enable button to confirm;
Rated current: The maximum value of the main motor current, unit Ampere;
Speed adjustment parameters: Automatic cutting control parameters, fulin la'aan 800, unit milli second,modification is prohibited;
Deceleration parameter: When the cutting current change value exceeds this value, rapid deceleration begins, unit Ampere;
Acceleration a1: When the cutting current is lower than the set cutting current, Qiimaha xawaaraha wuxuu kordhay xawaare kasta oo ku saabsan socodka socodka;
Khiyaano A2: Markuu goynta hadda ka sarreeyo ka sarreeya goynta hada, Qiimaha xawaaraha ayaa hoos u dhigay khiyaano kasta oo ka mid ah dhaqdhaqaaqa socodka;
Gacanta wareerka hada: Qiimaha caadiga ah, modification is prohibited;
Waqtiga jooji: Ka dib qaabka otomatiga ah ee si otomaatig ah oo xamuul ah, Waqtiga hadda jira mar labaad waa la ogaan doonaa ka dib muddo ah. Haddii ay ka yar tahay jadwalka hadda, Gawaarida socodka ayaa si otomaatig ah u bilaaban doona; Cutub labaad, Qiimaha caadiga ah, modification is prohibited;
Ugu badnaan: Kala duwan ee jawaabta mootada ugu weyn ee hadda jirta, unit Ampere;
Martida ugu badan: Xakamaynta Xawaaraha xawaaraha ee xawaaraha xawaaraha xawaaraha;
Socodka ugu badan: Xadhig aan sax ahayn;
Xadidda xawaaraha: Inta lagu guda jiro goynta otomaatiga ah, Soo bandhigida Xawaaladda fog ee Socodka xadka xawaaraha dhaqdhaqaaqa = 50% ee xuduudan;
Kordhin dareenka: Marka jawaabta guud ee wadista guud ee hadda la kordhiyo, Markasta oo ay kororku ka badan yahay qiimahan, socodka dhaqdhaqaaqa socodka;
Hoos u dhig dareenka: Markii jawaab-celinta hadda jirta ee matoorka ay yaraato, Iyo mar kasta oo qiimahu ka badan yahay qiimahaas, socodka socodka dhaqdhaqaaqa;
Xasaasiyadda Xasaasiga: Kudar oo ka goynta dib-u-kordhinta dib-u-dhaca ee xudunta dareenka;
Deji hadda: Goynta otomaatigga ah, Bilowga xadka jawaab celinta mootada ee hadda jirta. Haddii qiimahan la dhaafo,Gawaarida socodka socodka wuxuu ku bilaabmayaa si loo qiimeeyo;Ka hooseeya qiimahan, Gawaarida socodka socodka wuxuu ku bilaabmayaa inuu dardar geliyo;cutub: Amaaf Ampera;
Ka bixida Abuurista: Marka habka tooska ahi uu bilaabmayo, Haddii jawaabta guud ee jawaabta ee hadda ka yar qiimahan,Waxay ku jiri doontaa habka dadka dadaalka ah., Waxay ka bixi doontaa qaabka aadka u shaqeysa oo galida qaabka goynta ah .unit waa ampere;
No-path hadda:Marka habka otomatiga uu bilaabmayo, Haddii jawaabta guud ee jawaabta ee hadda ka yar qiimahan,it is in no-load mode.If it is greaterthan this value, it will exit the no-load mode and enter the cutting mode.Unit is Ampere;
Swing arm speed: Initial speed of swing arm motor when starting up;
Cutting mode: Switch between blade saw and wire saw modes, and the parameters will switch accordingly after the switch; in blade saw mode, the remote control display adds a swing arm motor, while in wire saw mode, there is no swing arm motor;
Debounce time: When the main motor feedback current exceeds the stop current, the feedback current will be continuously detected. The debounce time is the duration of this continuous detection.After this time, if the main motor current still exceeds the stop current, the walking motor will stop;otherwise, the walking motor will stop. The motor will keep going;
Stop current: The main motor feedback current exceeds this value, and the walking motor will stop;Unit is Ampere;
Offset default: The initial value of the walking motor speed limit when the remote control is turned on = 50% of this value;
6.Remote control electrical characteristics
7.Remote control size
The final interpretation right of this product belongs only to our company.
