alxanka mashiinka alxanka automation alxanka iyo operator alxanka.Turn Rolls 1.Isticmaalka soo noqnoqda hopping technology gudbinta 4 badhamada gaarka ah, switch IO signal, output signal to the system through IO-LINK protocol;
Support quick movement button + and button -, press and hold the button to replace the handwheel to move the machine;
1.Hordhaca Waxsoosaarka
Qalabka gacmeedka elektaroonigga ah ee wireless-ka ah waxaa loo isticmaalaa hagida gacanta, boos u dhigasho, tool alignment,and other operations on CNC machine tools. Alaabtaani waxay qaadanaysaa tikniyoolajiyadda gudbinta wireless, Ciribtirka isku xirka siligga ee dhaqanka, Yaraynta khaladaadka qalabka oo ay sababaan fiilooyinka, eliminating the disadvantages of cable dragging and oil stains, iyo samaynta hawlgalka mid ku habboon. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,magnification, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.
2. Astaamaha wax soo saarka
1. Kordmada 433mhz teknoolojiyadda isgaarsiinta wireless ah, masaafada hawlgalka wireless-ka ah waa 40 mitir;
2. Kordhinta shaqooyinka soo noqnoqda oo toos ah, isticmaal 32 sets of wireless remote controllers at the same time without affecting each other;
3. Taageer batoonka joogtada ah ee joojinta, Soo Saabsan IO SAXIIXA IO, connected to the system through IO wiring;
4. alxanka mashiinka alxanka automation alxanka iyo operator alxanka.Turn Rolls 1.Isticmaalka soo noqnoqda hopping technology gudbinta 4 badhamada gaarka ah, switch IO signal, output signal to the system through IO-LINK protocol;
5. Support quick movement button + and button -, press and hold the button to replace the handwheel to move the machine;
6. Taageer 6-Axis Xakamaynta, switch IO signal, output signal to the system through IO-LINK protocol;
7. Support 1X,10x, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;
3.Product Specifications
4.Product Features
Qoraalada:
Badhanka Joogtada ah:
Riix batoonka joogtada ah ee joogsiga, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.
②Screen display:
③Custom Buttons:
4 badhamada gaarka ah, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Riix oo hayso badhanka suuxinta oo rux garaaca garaaca wadnaha si aad ugu dirto garaaca wadnaha
Calaamadee si loo xakameeyo dhaqdhaqaaqa mashiinka mashiinka.
⑨Power switch:
Handwheel power button.
5.jaantuska agabka alaabta
6.Tilmaanta Rakibaadda Waxsoosaarka Waxqabadka
6.1 Talaabooyinka rakibaadda wax soo saarka
1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Tixraac jaantuskayaga soo-jeedinta, isbarbar dhig qalabkaaga goobta, oo ku xir
Qalabka loo maro soo-qaataha.
3. After the receiver is fixed, the antenna equipped with the receiver must be connected,
and the outer end of the antenna must be installed or placed outside the electrical cabinet.
It is recommended to place it on the top of the electrical cabinet for the best signal effect. It
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
which may cause the signal to be unusable.
4.Finally, turn on the handwheel power switch and you can operate the machine by
handwheel remote control.
6.2 Receiver installation dimensions
6.3 Receiver Wiring Reference Diagram
7. Dayactirka iyo Daryeelka
1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
nolosha adeegga;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Please avoid squeezing, falling, bumping, iwm. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. Haddii aan la isticmaalin muddo dheer, please store the handwheel in a clean and safe place;
6. Pay attention to moisture and shock during storage and transportation.
8. Security Information
1. Fadlan u aqri tilmaamaha si taxaddar leh kahor intaadan isticmaalin. Non-professionals are prohibited from
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. Haddii loo baahdo hagaajinta, Fadlan la xiriir soo-saaraha. If the damage is caused by self-repair,
Soo-saarehu ma bixin doono dammaanad.
