Programmable CNC Wireless Remote Control PHB10

Paglalarawan

1.Panimula ng produkto

The programmable CNC remote control PHB10 is suitable for wireless
Remote control operation ng iba't ibang mga sistema ng CNC. It supports user-defined
programming to develop button functions, and realize remote control of various
functions on the CNC system; it supports user-defined programming to develop
LED lights to light up and turn off, and realize dynamic display of system status;
the remote control comes with a rechargeable battery and supports Type-C
interface charging.

2.Mga Tampok ng Produkto

1. Gamit ang 433MHz wireless na teknolohiya ng komunikasyon, ang wireless operation
ang distansya ay 80 metro;
2.Gamit ang awtomatikong frequency hopping function, 32 Mga hanay ng wireless remote
Ang mga Controller ay maaaring magamit nang sabay nang hindi nakakaapekto sa bawat isa;
3.Suporta 32 Custom Button Programming;
4.Suporta 9 custom LED light display programming;
5.Support IP67 waterproof level;
6.Support standard Type-C interface charging; 5V-2A Pag-singil ng Pag-singil;
1100 mAh large capacity battery, with automatic sleep standby function; realize
ultra-long low power standby;
7.Support real-time display of power.

3.Prinsipyo ng pagtatrabaho

4. Mga pagtutukoy ng produkto

5.Panimula ng Pag -andar ng Produkto

Mga Tala：
①Battery level display：
Lights up after power on, turns off after power off;
If the battery indicator light is only one bar and keeps flashing, it means the
battery is too low. Please replace the battery;

If the battery indicator lights are all on and the other LED lights flash back and
forth, it means the battery is very low. Please replace the battery;
If the battery indicator does not light up or go out, and the device cannot be
started by pressing and holding the power button, Mangyaring palitan ang baterya;

②Button area：32 buttons arranged in 4X8, Programming na tinukoy ng gumagamit;

③Status LED：
COMMU: Button indicator light, lights up when the button is pressed and goes
out when the button is released; other lights are custom displays;

④Power switch：
Long press for 3 seconds to turn on, long press for 3 seconds to turn off;
⑤Charging port：
Use Type-C charger to charge, singilin ang boltahe 5v, Kasalukuyang 1A-2A; charging
time 3-5 oras;

When charging, the power indicator flashes, indicating that it is charging. When
fully charged, the power indicator will show full bar without flashing.

6.Diagram ng mga accessory ng produkto

7.Gabay sa Pag -install ng Produkto

1 . I nsert the USB receiver into the computer, Awtomatikong ang computer
recognize and install the USB device driver without manual
2. Ipasok ang remote control sa charger. Matapos ganap na sisingilin ang baterya, press
and hold the power button for 3 seconds. The remote control will turn on and the power
indicator will light up, indicating that the power-on is successful.
3. Pagkatapos ng kapangyarihan, Maaari kang magsagawa ng anumang operasyon sa pindutan. The remote control
can support dual button operation at the same time. Kapag pinindot mo ang anumang pindutan, ang
COMMU light on the remote control will light up, indicating that this button is valid.

8.Mga tagubilin sa operasyon ng produkto
Bago ang pag -unlad at paggamit ng produkto, you can use the demo software we provide to
test the buttons on the remote control and the LED light on the remote control. You can
also use the demo as a reference routine for future programming development.
Bago gamitin ang software ng demo, Mangyaring isaksak ang USB receiver sa computer,
make sure the remote controller has sufficient power, press and hold the power button to t
urn it on, At pagkatapos ay gamitin ito;
Kapag ang anumang pindutan sa remote control ay pinindot, the test software demo will display
the corresponding key value. Matapos itong ilabas, Nawala ang pangunahing halaga ng display,
indicating that the key upload is normal;
You can also select the LED light number on the test software demo, click download,
and the corresponding light number on the remote control will light up, indicating that the
LED light is downloading normally.

9.Pag -aayos ng produkto

10. Pagpapanatili at pangangalaga

1. Mangyaring gamitin ito sa isang tuyong kapaligiran na may normal na temperatura at presyon upang mapalawak
ang buhay ng serbisyo;
2. Huwag gumamit ng matalim na mga bagay upang hawakan ang pangunahing lugar upang mapalawak ang buhay ng serbisyo ng susi;
3. Mangyaring panatilihing malinis ang pangunahing lugar upang mabawasan ang susi ng susi;
4. Iwasan ang pagpisil at pagbagsak upang maging sanhi ng pinsala sa remote control;
5. Kung hindi ginagamit ng mahabang panahon, please remove the battery and store the remote control
and battery in a clean and safe place;
6. Bigyang-pansin ang kahalumigmigan-patunay sa panahon ng pag-iimbak at transportasyon.

11.Impormasyon sa Kaligtasan

1. Mangyaring basahin nang mabuti ang mga tagubilin bago gamitin. Ang mga hindi propesyonal ay ipinagbabawal
pagpapatakbo.
2. Please use the original charger or a charger produced by a regular manufacturer with the
same specifications.
3. Please charge in time to avoid incorrect operation due to insufficient power causing the
remote control to be unresponsive.
4. Kung kinakailangan ang pag -aayos, Mangyaring makipag -ugnay sa tagagawa. Kung ang pinsala ay sanhi ng pag-aayos ng sarili,
Ang tagagawa ay hindi magbibigay ng warranty.