1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 میٹر.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, محور کا انتخاب, اضافہ, and other information.
3. ایمرجنسی اسٹاپ بٹن کی حمایت کریں, IO سگنل آؤٹ پٹ کو سوئچ کریں, and the hand wheel shutdown emergency stop is still valid.
4. سپورٹ 6 کسٹم بٹن, switch IO signals, and can output signals to the system through IO wiring or communication.
وائرڈ الیکٹرانک ہینڈ وہیل انسٹرکشن دستی
تفصیل
1. مصنوعات کا تعارف
Electronic handwheel is used for manual guidance, پوزیشننگ, ٹول سیدھ, اور سی این سی مشین ٹولز پر دیگر کاروائیاں. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, اضافہ, buttons, andother signals through communication.
2.Product functional features
1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 میٹر.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, محور کا انتخاب, اضافہ, and other information.
3. ایمرجنسی اسٹاپ بٹن کی حمایت کریں, IO سگنل آؤٹ پٹ کو سوئچ کریں, and the hand wheel shutdown emergency stop is still valid.
4. سپورٹ 6 کسٹم بٹن, switch IO signals, and can output signals to the system through IO wiring or communication.
5. سپورٹ 6 یا 8 محور کنٹرول, with switch IO signals that can be output to the system through IO wiring or communication.
6. سپورٹ 3 یا 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. پلس انکوڈر کی حمایت کریں, 100 دالیں/باری, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.
3. مصنوعات کی وضاحتیں
| Handwheel working power supply voltage | DC24V/1A |
| Receiver power supply voltage | DC24V/1A |
| Receiver IO output load range | DC24V |
| Hand wheel end cable length | 10م |
| Receiver end cable length | 1م |
| Receiver end network cable length | 3م |
| Operating temperature | -25℃<x<55℃ |
| Anti-fall height | 1م |
| Custom Button Quantity | 6 |
| Product dimensions | 233*90.7*77.4（mm） |
4.پروڈکٹ فنکشن کا تعارف
نوٹ:
Emergency stop button:
ایمرجنسی اسٹاپ بٹن دبائیں, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.
After releasing the emergency stop, وصول کنندہ پر ایمرجنسی اسٹاپ IO آؤٹ پٹ بند ہے, and all functions of the handwheel are restored.
② Screen display:
PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 کسٹم بٹن, each corresponding to an IO output point on the receiver, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
دبائیں اور قابل بٹن کو تھامیں, shake the pulse encoder, emit a pulse signal, and control the movement of the machine axis.
⑧ Handwheel cable:
Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.
5. پروڈکٹ آلات ڈایاگرام
6. پروڈکٹ انسٹالیشن گائیڈ
6.1 Product installation steps
6.1 Product installation steps
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Refer to our receiver wiring diagram and compare it with your on-site equipment. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. After fixing the receiver, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.
6.2 وصول کنندہ کی تنصیب کے طول و عرض
6.3 Installation dimensions of aviation plugs
6.4 وصول کنندہ وائرنگ ریفرنس ڈایاگرام
7.پروڈکٹ آپریشن کی ہدایات
7.پروڈکٹ آپریشن کی ہدایات
1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.
2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.
3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.
4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. میگنیفیکیشن منتخب کریں: Switch the magnification switch and select the magnification level you need.
7. محور منتقل کرنا: دبائیں اور قابل بٹن کو تھامیں, محور سلیکشن سوئچ کو منتخب کریں, select the magnification switch, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. ایمرجنسی اسٹاپ بٹن دبائیں, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled, release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.
8.پروڈکٹ ماڈل کی تفصیل
① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : محور کے انتخاب کے سوئچ کی تعداد کی نمائندگی کرتا ہے, represents axes, and represents
axes.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, and B represents encoded output signal.
9.Product trouble shooting
10.دیکھ بھال
1. براہ کرم اسے خشک ماحول میں کمرے کے درجہ حرارت اور اس کی خدمت کی زندگی کو بڑھانے کے لئے دباؤ پر استعمال کریں.
2. براہ کرم خدمت کی زندگی کو بڑھانے کے لئے غیر معمولی ماحول جیسے بارش اور پانی کے بلبلوں میں استعمال کرنے سے گریز کریں.
3. براہ کرم اپنی خدمت کی زندگی کو بڑھانے کے لئے ہینڈ وہیل کی ظاہری شکل کو صاف رکھیں.
4. براہ کرم نچوڑنے سے گریز کریں, گرنا, ٹکرانا, وغیرہ. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. اگر ایک طویل وقت کے لئے استعمال نہیں کیا گیا ہے, please store the handwheel in a clean and safe place.During storage and transportation, نمی اور صدمے کی مزاحمت پر توجہ دی جانی چاہئے.
11. حفاظت سے متعلق معلومات
1. براہ کرم استعمال سے پہلے ہدایات کو احتیاط سے پڑھیں اور غیر پیشہ ور افراد کو آپریٹنگ سے منع کریں.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. اگر مرمت کی ضرورت ہو, براہ کرم مینوفیکچر سے رابطہ کریں. اگر نقصان خود مرمت کی وجہ سے ہوا ہے, کارخانہ دار وارنٹی فراہم نہیں کرے گا
