Tavsif
1.Mahsulotni tanishtirish
Qo'lda qo'llanma uchun simsiz elektron qo'lda, joylashtirish, tool alignment,and other operations on CNC machine tools. Ushbu mahsulot simsiz uzatish texnologiyasini qabul qiladi, An'anaviy bahor simlari bilan bog'liq, Kabellar tomonidan kelib chiqadigan uskunalar etishmovchiligini kamaytirish, eliminating the disadvantages of cable dragging and oil stains, va operatsiyani yanada qulayroq qilish. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,magnification, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.
2. Mahsulot xususiyatlari
1. 433mhz simsiz aloqa texnologiyasini qabul qiling, Simsiz operatsiya masofa 40 metr;
2. Adopt automatic frequency hopping function, use 32 sets of wireless remote controllers at the same time without affecting each other;
3. Support emergency stop button, IO signal chiqishini yoqing, connected to the system through IO wiring;
4. Payvandlash mashinasini avtomatlashtirish payvandlash va payvandlash operatori. Turn Rolls 1. Chastotani sakrashli uzatish texnologiyasidan foydalanish 4 maxsus tugmalar, IO signalini yoqing, IO-LINK protokoli orqali tizimga chiqish signali;
5. Tez harakatlanish tugmasini qo'llab-quvvatlang + va tugma -, Mashinani ko'chirish uchun qo'lingini almashtirish uchun tugmani bosing va ushlab turing;
6. 6 o'qi nazoratini qo'llab-quvvatlash, IO signalini yoqing, IO-LINK protokoli orqali tizimga chiqish signali;
7. Support 1X,10x, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;
3.Product Specifications
4.Product Features
Qaydlar:
①Emergency stop button:
Press the emergency stop button, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.
②Screen display:
③Custom Buttons:
4 maxsus tugmalar, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Yoqish tugmachasini bosing va ushlab turing va pulsni yuborish uchun puls kodini silkiting
mashina o'qining harakatini boshqarish uchun signal.
⑨Power switch:
Handwheel power button.
5.Mahsulot uchun aksessuarlar diagrammasi
6.Mahsulotni o'rnatish bo'yicha qo'llanma
6.1 Mahsulotni o'rnatish bosqichlari
1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Qabul qiluvchiimiz sigrammasiga murojaat qiling, Uni saytingizdagi uskunalar bilan taqqoslang, va ulanish
avtoulovni kabellar orqali qabul qiluvchi uskuna.
3. Qabul qilgich tuzilgandan keyin, Qabul qilgich bilan jihozlangan antenna ulanishi kerak,
antennaning tashqi uchi elektr kabinetidan tashqarida o'rnatilishi yoki joylashtirilgan bo'lishi kerak.
It is recommended to place it on the top of the electrical cabinet for the best signal effect. U
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
bu signalni yaroqsiz bo'lishiga olib kelishi mumkin.
4.Nihoyat, Qo'l quvvatini yoqish va siz mashinani boshqarishingiz mumkin
Ovqatlanish masofadan boshqarish.
6.2 Qabul qiluvchilarni o'rnatish o'lchamlari
6.3 Qabul qiluvchining sxemasi
7. Ta'minot va parvarish qilish
1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
the service life;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Iltimos, siqilishdan saqlaning, yiqilish, urish, va boshqalar. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. Agar uzoq vaqt ishlatilmasa, Iltimos, qo'lvalini toza va xavfsiz joyda saqlang;
6. Pay attention to moisture and shock during storage and transportation.
8. Security Information
1. Foydalanishdan oldin ko'rsatmalarni diqqat bilan o'qing. Non-professionals are prohibited from
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. Agar ta'mirlash talab qilinsa, Iltimos, ishlab chiqaruvchi bilan bog'laning. If the damage is caused by self-repair,
Ishlab chiqaruvchi kafolat bermaydi.
