I-fanboel ye-fancheel ye-elektroniki

Inkcazo

1.Intshayelelo Intshayelelo

I-wireless ngesandla i-elektroniki isetyenziselwa ukukhokelwa ngesandla, ukubeka, tool alignment,and other operations on CNC machine tools. Le mveliso yamkela itekhnoloji yokuhambisa i-wireless, Ukuphelisa unxibelelwano lwe-wire ye-Wire yeNtloko, Ukunciphisa ukusilela kwezixhobo ezibangelwa ziintambo, eliminating the disadvantages of cable dragging and oil stains, and making operation more convenient. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,ukuqina, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.

2. Iimpawu zeMveliso
1. Itekhnoloji yoNxibelelwano lwe-433mhz, umgama wokusebenza ngaphandle kwentambo 40 iimitha;
2. Ukwamkela ukusebenza ngokuzenzekelayo, sebenzisa 32 sets of wireless remote controllers at the same time without affecting each other;
3. Inkxaso yeXesha leMiselweyo, Guqula iziphumo zomqondiso, connected to the system through IO wiring;
4. Inkxaso 4 amaqhosha esiqhelo, Guqula isiginali, Imveliso yemveliso kwinkqubo nge-IO-Comit Protocol;
5. Inkxaso ekhawulezayo yokuhamba ngokukhawuleza + kunye neqhosha -, Cinezela kwaye ubambe iqhosha ukuba libuyisele i-handheel ukuba isuse umatshini;
6. Inkxaso ye-6-Axis, Guqula isiginali, Imveliso yemveliso kwinkqubo nge-IO-Comit Protocol;
7. Support 1X,10x, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;

3.Product Specifications

4.Product Features

Amanqaku:
Iqhosha lokuyeka:
Cinezela iqhosha lokumisa elingxamisekileyo, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Screen display:

③Custom Buttons:
4 amaqhosha esiqhelo, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Cinezela kwaye ubambe iqhosha le-Qina kwaye uhlunguze i-pulse encoder ukuba athumele ipulse
uphawu ukulawula intshukumo ye-axis ye-axis.
⑨Power switch:
Handwheel power button.

5.I-Intermes yeMveliso

6.Isikhokelo semveliso

6.1 Amanyathelo ofakelo lwemveliso

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Jonga umzobo wethu we-wiring, Thelekisa nesixhobo sakho sendawo, kwaye uqhagamshele
Izixhobo zokuya kumamkeli ngentambo.
3. Emva kokuba umntu omkelweyo, I-eriyali exhotywe ngumsebenzi kufuneka iqhagamshelwe,
Kwaye isiphelo sangaphandle se-eriyali kufuneka sifakwe okanye sibekwe ngaphandle kweKhabhinethi yoMbane.
Kucetyiswa ukuba uyibeke eqongeni kwiKhabhinethi yoMbane yeyona nto ibalulekileyo. Yona
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
enokubangela umqondiso ungaqhelekanga.
4.Ekugqibeleni, Vula i-Handweel Ansourt Shintsha kwaye ungasebenza umatshini
Ulawulo lwe-Handowel kude.

6.2 Ubungakanani bofakelo lokufaka

6.3 Umzobo wereferensi ye-Wiring Wiring

7. Ulungiso kunye noKhathalelo

1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
Ubomi benkonzo;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Nceda uphephe ukuntywila, ukuwa, ukugoba, njl. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. Ukuba ayisetyenziswanga ixesha elide, Nceda ugcine isandheel kwindawo ecocekileyo nekhuselekileyo;
6. Pay attention to moisture and shock during storage and transportation.

8. Security Information

1. Nceda ufunde imiyalelo ngononophelo ngaphambi kokusebenzisa. I-on-rionsals ayivunyelwanga
isebenza.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. Ukuba ukulungiswa kuyafuneka, Nceda unxibelelane noMvelisi. Ukuba umonakalo ubangelwa kukuzilungisa,
Umenzi akazukubonelela ngewaranti.