1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 iimitha.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, ukhetho lwe-axis, magnification, and other information.
3. Inkxaso yeXesha leMiselweyo, Guqula iziphumo zomqondiso, and the hand wheel shutdown emergency stop is still valid.
4. Inkxaso 6 amaqhosha esiqhelo, switch IO signals, and can output signals to the system through IO wiring or communication.
Wired electronic handwheel Instruction Manual
Inkcazo
1. Intshayelelo Intshayelelo
Electronic handwheel is used for manual guidance, ukubeka, tool alignment, and other operations on CNC machine tools. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, magnification, buttons, andother signals through communication.
2.Product functional features
1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 iimitha.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, ukhetho lwe-axis, magnification, and other information.
3. Inkxaso yeXesha leMiselweyo, Guqula iziphumo zomqondiso, and the hand wheel shutdown emergency stop is still valid.
4. Inkxaso 6 amaqhosha esiqhelo, switch IO signals, and can output signals to the system through IO wiring or communication.
5. Inkxaso 6 or 8 Ulawulo lwe-axis, with switch IO signals that can be output to the system through IO wiring or communication.
6. Inkxaso 3 or 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Support pulse encoder, 100 pulses/turn, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.
3. Imveliso yemveliso
| Handwheel working power supply voltage | DC24V/1A |
| Receiver power supply voltage | DC24V/1A |
| Receiver IO output load range | DC24V |
| Hand wheel end cable length | 10m |
| Receiver end cable length | 1m |
| Receiver end network cable length | 3m |
| Operating temperature | -25℃<X<55℃ |
| Anti-fall height | 1m |
| Custom Button Quantity | 6 |
| Product dimensions | 233*90.7*77.4（mm） |
4.Umsebenzi wemveliso
Phawula:
Emergency stop button:
Cinezela iqhosha lokumisa elingxamisekileyo, and the two sets of emergency stop IO outputs on the receiver will be disconnected, and all functions of the handwheel will be invalid.
After releasing the emergency stop, indawo yokumisa imeko ye-IO ikhuphele kwi-mamkeli, and all functions of the handwheel are restored.
② Screen display:
PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 amaqhosha esiqhelo, each corresponding to an IO output point on the receiver, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Cinezela kwaye ubambe iqhosha, shake the pulse encoder, emit a pulse signal, and control the movement of the machine axis.
⑧ Handwheel cable:
Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.
5. Product accessory diagram
6. Isikhokelo semveliso
6.1 Product installation steps
6.1 Product installation steps
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Refer to our receiver wiring diagram and compare it with your on-site equipment. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. After fixing the receiver, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.
6.2 Ubungakanani bofakelo lokufaka
6.3 Installation dimensions of aviation plugs
6.4 Umzobo wereferensi ye-Wiring Wiring
7.Imiyalelo yeMveliso yeMveliso
7.Imiyalelo yeMveliso yeMveliso
1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.
2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.
3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.
4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Khetha amandla: Switch the magnification switch and select the magnification level you need.
7. I-Axis eshukumayo: Cinezela kwaye ubambe iqhosha, Khetha utshintsho lokukhetha i-Axis, select the magnification switch, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Cinezela iqhosha lokumisa elingxamisekileyo, the corresponding emergency stop IO output of the receiver will be disconnected, the handwheel function will be disabled, release the emergency stop button, the emergency stop IO output will be closed, and the handwheel function will be restored.
8.Inkcazo yemodeli yemveliso
① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
② : Represents Siemens system specific.
③ : imele inani lokukhetha i-axis, represents axes, and represents
axes.
④ : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, and B represents encoded output signal.
9.Product trouble shooting
10.Maintenance
1. Nceda uyisebenzise kwindawo eyomileyo kubushushu begumbi kunye noxinzelelo ukwandisa ubomi benkonzo.
2. Nceda uphephe ukusebenzisa kwiindawo ezingaqhelekanga ezinjengemvula kunye neebhubhu zamanzi ukwandisa ubomi beenkonzo.
3. Nceda ugcine imbonakalo yesandla icocekile ukwandisa ubomi benkonzo.
4. Nceda uphephe ukuntywila, ukuwa, ukugoba, njl. to prevent damage to the precision components inside the handwheel or accuracy errors.
5. Ukuba ayisetyenziswanga ixesha elide, please store the handwheel in a clean and safe place.During storage and transportation, Ingqwalaselo kufuneka ihlawulwe kumswakama kunye nokuchasana nokothusa.
11. Ulwazi ngoKhuseleko
1. Nceda ufunde imiyalelo ngononophelo ngaphambi kokusebenzisa kwaye kuthintele oochwephesha ekusebenzeni.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Ukuba ukulungiswa kuyafuneka, Nceda unxibelelane noMvelisi. Ukuba umonakalo ubangelwa kukuzilungisa, Umenzi akazukubonelela ngewaranti
