Inkcazo
1.Intshayelelo Intshayelelo
The PHB06B-Laser enables wireless remote control operation of the CNC system via the Modbus TCP protocol, Inkxaso 12 amaqhosha, and supports real-time display of system coordinates and status.
2.Iimpawu zeMveliso
1. 12 amaqhosha, 6 apho inkxaso yemiqondiso ye-I/O.
2. Ixhasa i-2.8-intshi yombala wesikrini ukubonisa.
3. Ixhasa i-9-level axis selector switch, ukuxhasa ukuya kuthi ga kwi-6-axis output.
4. Ixhasa iswitshi enye yokuphindaphinda inqanaba eli-3.
5. Supports one electronic remote control, 100 pulses/revolution.
6. Supports receiver Ethernet interface, Modbus TCP communication.
7. Supports standard Type-C charging, 5I-V-2A Charticetion, built-in battery specifications 18650/12775mWh.
3.UMGAQO-NKQUBO OMPILO
PHB06B-Laser is connected to the user’s system via an Ethernet interface. It performs data interaction through the Modbus TCP protocol. The user system acts as the Modbus master station, which can transmit real-time system display coordinates and read information such as keys and axis selection of the PHB06B-Laser remote control, so as to realize real-time data communication.
Phawula: For the specific protocol, please refer to the “3D 5-axis Laser Cutting – PHB06B – Laser – Modbus Protocol Description”.
4.IiNkcazo zeMveliso
| I-voltage yombane wamandla |
DC5V-DC24V |
| Button lifespan |
1,000,000 amaxesha |
| Operating Temperature |
-25℃ < X < 55℃
|
| Safe drop height |
1 m |
| Receiver port |
I-Ethernet |
| Number of buttons |
12
|
| Veza isikrini |
2.8-inch color screen
|
| wireless communication frequency |
433MHz band |
| Receiver sensitivity |
-100dBm
|
| Handheld transmit power |
15dBm
|
| Umgama wonxibelelwano olungenazingcingo |
100 meters barrier-free range |
| Rechargeable Battery Specification |
Rechargeable Battery Specification |
| Charging base power supply voltage |
I-DC24V / 1A |
|
Wired Charging Specification
|
Type-C charging port, DC 5V/2A |
5.Umsebenzi wemveliso
Amanqaku:
① Power Switch
Used to turn the remote control on and off.
② Enable buttons on both sides
The enable button must be pressed while holding the remote control.
③Button area
12 amaqhosha
④ Axis Selection and Magnification Switch
One 9-gear axis selection switch; one 3-gear magnification switch.
⑤ Emergency Stop Switch
Remote control emergency stop switch.
⑥ Display Screen Area
It can display coordinates, status and other information.
⑦ Electronic Pulse Encoder
One electronic pulse encoder with 100 iipulses per revolution.
⑧ Type-C Charging Port
It is used for connection between the charger and the remote control.
The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key
6. Product Accessories Diagram
7. Receiver and Wiring Ports
8. Configure network access
10. Installation dimensions
Ubungakanani bofakelo lokufaka
Iyunithi: millimeters
Thickness: 29.6mm
11.Maintenance and upkeep
1. Nceda uyisebenzise kwindawo eyomileyo kubushushu begumbi kunye noxinzelelo ukwandisa ubomi benkonzo.
2. Do not use sharp objects to contact the button area to extend button life.
3. Please keep the appearance of the remote control clean to extend its service life.
4. Please avoid crushing, dropping, or bumping, njl. to prevent damage to the precision components
5. Avoid moisture and shock during storage and transportation.
12.Ulwazi ngoKhuseleko
1. Nceda ufunde imiyalelo ngononophelo ngaphambi kokusebenzisa kwaye kuthintele oochwephesha ekusebenzeni.
2. If you repair it yourself and cause damage, the warranty will be void.
