1. 12 按钮, 6 of which support I/O signals.
2. Supports 2.8-inch color screen display.
3. Supports one 9-level axis selector switch, supporting up to 6-axis output.
4. Supports one 3-level multiplier switch.
3D 五轴激光切割无线遥控：PHB06B-激光
描述
1.产品简介
The PHB06B-Laser enables wireless remote control operation of the CNC system via the Modbus TCP protocol, 支持 12 按钮, and supports real-time display of system coordinates and status.
2.产品功能
1. 12 按钮, 6 of which support I/O signals.
2. Supports 2.8-inch color screen display.
3. Supports one 9-level axis selector switch, supporting up to 6-axis output.
4. Supports one 3-level multiplier switch.
5. Supports one electronic remote control, 100 pulses/revolution.
6. Supports receiver Ethernet interface, Modbus TCP communication.
7. Supports standard Type-C charging, 5V-2A充电规范, built-in battery specifications 18650/12775mWh.
3.工作原理
PHB06B-Laser is connected to the user’s system via an Ethernet interface. It performs data interaction through the Modbus TCP protocol. The user system acts as the Modbus master station, which can transmit real-time system display coordinates and read information such as keys and axis selection of the PHB06B-Laser remote control, so as to realize real-time data communication.
笔记: For the specific protocol, please refer to the “3D 5-axis Laser Cutting – PHB06B – Laser – Modbus Protocol Description”.
4.产品规格
| 接收器电源电压 | DC5V-DC24V |
| Button lifespan | 1,000,000 时代 |
| Operating Temperature |
-25℃ < x < 55℃
|
| Safe drop height | 1 m |
| Receiver port | 以太网 |
| Number of buttons |
12
|
| 显示屏幕 |
2.8-inch color screen
|
| wireless communication frequency | 433MHz band |
| Receiver sensitivity |
-100分贝
|
| Handheld transmit power |
15分贝
|
| 无线通讯距离 | 100 meters barrier-free range |
| Rechargeable Battery Specification | Rechargeable Battery Specification |
| Charging base power supply voltage | 直流24V/1A |
|
Wired Charging Specification
|
Type-C charging port, DC 5V/2A |
5.产品功能介绍
笔记:
① Power Switch
Used to turn the remote control on and off.
② Enable buttons on both sides
The enable button must be pressed while holding the remote control.
③Button area
12 按钮
④ Axis Selection and Magnification Switch
One 9-gear axis selection switch; one 3-gear magnification switch.
⑤ Emergency Stop Switch
Remote control emergency stop switch.
⑥ Display Screen Area
It can display coordinates, status and other information.
⑦ Electronic Pulse Encoder
One electronic pulse encoder with 100 每转脉冲数.
⑧ Type-C Charging Port
It is used for connection between the charger and the remote control.
The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key
6. Product Accessories Diagram
7. Receiver and Wiring Ports
8. Configure network access
9. Test Instructions
10. Installation dimensions
接收器安装尺寸
单元: millimeters
Thickness: 29.6mm
11.Maintenance and upkeep
1. 请在室温和压力下在干燥的环境中使用它以延长其使用寿命.
2. Do not use sharp objects to contact the button area to extend button life.
3. Please keep the appearance of the remote control clean to extend its service life.
4. Please avoid crushing, dropping, or bumping, ETC. to prevent damage to the precision components
5. Avoid moisture and shock during storage and transportation.
12.安全信息
1. 请在使用前仔细阅读说明，并禁止非专业人员操作.
2. If you repair it yourself and cause damage, the warranty will be void.
