描述
1.产品简介
Wireless Remote Control is used for manual guidance, 定位, tool setting and other operations of CNC machine tools. 该产品采用无线传输技术, 消除传统的弹簧电线连接, 减少电缆引起的设备故障, 消除电缆拖动的缺点, 石油污渍, ETC。, and is more convenient to operate.It is widely applicable to CNC machine tools such as gantry machining centers, gantry vertical lathes, and CNC gear processing machines, and is compatible with various mainstream CNC system brands on the market, including Siemens, 三菱, Fanuc, Syntec and more.
2.产品功能
1. Adopts 433MHz wireless communication technology with a wireless operating distance of 20 仪表.
2.Adaptive frequency hopping; 32 sets of wireless remote controls can be used simultaneously without interference.
3.Supports the emergency stop button, and the emergency stop button remains effective even after the remote control is powered off.
4.支持 3 custom buttons with switching IO signal output.
5.Supports 6-axis control, 和 7 to 12-axis control is customizable.
6. Supports 3-speed magnification control, and 4-speed magnification control is customizable.
7.supports the enable button function, which can output switching IO signals, and also control axis selection, magnification and encoder.
8.Supports modifying the encoding type of axis selection and magnification via software.
9. Supports pulse encoder with specification of 100 每转脉冲数.
10. Supports standard Type-C charging with 5V-2A charging specification; built-in battery
specification: 14500 / 1100妈.
| Working Voltage and Current of Handheld Terminal |
3.7V/20.0mA |
| Charging Battery Specification |
3.7V/14500/1100mAh
|
| Low Voltage Alarm Range of Handheld Terminal |
<3.35v |
| Receiver Power Supply Voltage |
DC5V-24V/1A |
| Receiver Emergency Stop Output Load Range |
AC125V-1A/DC30V-2A |
| Receiver Enable Output Load Range |
AC125V-1A/DC30V-2A |
| Receiver Custom Button Output Load Range |
直流24V/50mA
|
| Receiver Axis Selection Output Load Range |
直流24V/50mA |
| Receiver magnification Output Load Range |
直流24V/50mA |
| Handheld Terminal Transmit Power |
15分贝
|
| 接收机接收灵敏度 |
-100分贝 |
| 无线通讯频率 |
433MHz频段
|
| Wireless Communication Distance |
20 meters barrier-free distance
|
| Operating Temperature |
-25℃<x<55℃ |
| Safe drop height |
1 m
|
| Number of Custom Buttons |
3
|
| Product Weight |
546.86（g） |
| Product Dimensions |
200*87*72（毫米） |
4. 产品功能介绍
笔记:
① Emergency Stop Button:
按下紧急停止按钮, the two groups of emergency stop IO outputs on the receiver will disconnect, and all remote control functions will be invalidated.Release the emergency stop button, the emergency stop IO outputs on the receiver will be closed, and all remote control functions will be restored. 此外, even if the remote control is powered off, pressing the emergency stop button can still activate the emergency stop IO output of the receiver.
② Enable Button:
Press either enable button on both sides, the two sets of enable IO outputs on the receiver will conduct. Release the enable button, and the enable IO outputs will disconnect. It is necessary to press and hold the enable button before toggling axis selection, magnification or rotating the remote control for the operation to take effect.This function can be canceled through the configuration software.
③ Axis Selection Switch (Power Switch):
按住启用按钮, then toggling the axis selection switch can control the movement of axis .Press and hold the enable button, then toggle the axis selection switch to switch the motion axis controlled by the remote control. Toggle the switch from the OFF position to any axis position, and the remote control will power on automatically.
④ Pulse Encoder:
Press and hold the enable button and rotate the pulse encoder, it will output pulse signals to control the movement of the machine axis.
⑤ LCD Display Screen:
5. Product Accessories Diagram
6. 产品安装指南
6.1 产品安装步骤
1. Install the receiver in the electrical cabinet via the buckle on its back, or mount it inside the electrical cabinet through the screw holes at the four corners of the receiver.
2. 请参阅我们的接收器接线图, 将其与您的现场设备进行比较, and connect the equipment to the receiver with cables.
3. After the receiver is fixed in place, install the supporting antenna of the receiver properly. Mount or place the outer end of the antenna outside the electrical cabinet. It is recommended to place it on the top of the electrical cabinet for optimal signal performance. Do not leave the antenna uninstalled or place it inside the electrical cabinet; otherwise, signal failure may occur.
4. 最后, turn on the remote control power switch, then you can remotely operate the machine via the remote control.
6.2 Receiver Installation Dimensions
7. 产品操作说明
1. 打开机器和接收器电源. The receiver operation indicator flashes. After the wireless electronic remote control is fully charged, toggle it from the OFF gear to the X-axis gear, and the remote control display lights up.
2. Select the axis : 按住启用按钮, toggle the axis selection switch to select the axis to be operated.
3. Select the magnification: 按住启用按钮, toggle the magnification switch to select the required magnification gear.
4. Axis movement: 按住启用按钮, select the axis selection switch and the magnification switch, then rotate the pulse encoder. Rotate clockwise to move the axis in the positive direction, and rotate counterclockwise to move the axis in the negative direction.
5. 按住任何自定义按钮, the corresponding button IO output of the receiver will turn on; release the button, and the output will turn off.
6. 按下紧急停止按钮, the corresponding emergency stop IO output of the receiver disconnects and the remote control function becomes invalid. Release the emergency stop button, the emergency stop IO output closes and the remote control function is restored.
7. If the wireless remote control is not operated for a period of time, 它会自动进入睡眠模式以减少功耗. It can be used normally again by pressing the enable button again.
8.If the wireless remote control is not used for a long time, turn the axis switch to OFF to turn off the power and extend battery life
①：UWGP stands for appearance style.
②：Pulse Output Parameters：
01: 表示脉冲输出信号为A, 乙; 脉冲电压5V; 脉冲量100PPR.
02: 表示脉冲输出信号为A, 乙; 脉冲电压12V; pulse quantity 25PPR.
03: 表示脉冲输出信号为A, 乙, 一个 -, 乙 -; 脉冲电压5V; 脉冲量100PPR.
04: 表示低级NPN开路输出, 使用A和B的脉冲输出信号; The number of pulses is 100PPR.
05: 指示高级PNP源输出, 使用A和B的脉冲输出信号; 脉冲数100PPR.
③：Represents the axis selection switch quantity; 6 stands for 6 轴, 7 stands for 7 轴, and so on.
④: Represents the signal type of the axis selection switch.A stands for point-to-point output signal, and B stands for encoder output signal.
⑤: Represents the signal type of the magnification switch.A stands for point-to-point output signal, and B stands for encoder output signal.
⑥: 代表自定义按钮的数量; 3 corresponds to 6 自定义按钮.
⑦: Represents the power supply for the system remote control. 05 stands for 5V power supply, 和 24 stands for 24V power supply.
⑧: Represents the contact charging mode. It starts charging automatically when placed back on the charging base.
9. 产品故障排除
10. Maintenance and upkeep
1. 请在室温和压力下在干燥的环境中使用它以延长其使用寿命.
2. Please avoid using in abnormal environments such as rain and water to extend the service life.
3. Please keep the appearance of the remote control clean to extend its service life.
4. Please avoid crushing, dropping, or bumping, ETC. to prevent damage to the precision components inside the remote control or accuracy errors.
5. 如果很长一段时间没有使用, please store the remote control in a clean and safe place.
6. Avoid moisture and shock during storage and transportation.
11. 安全信息
1. 请在使用前仔细阅读说明，并禁止非专业人员操作.
2. Please charge the remote control in a timely manner when the battery level is too low, to avoid malfunction and operational errors caused by insufficient power.
3. If you repair it yourself and cause damage, the warranty will be void.
