Hulagway
1.Pasiuna
The PHB06B-Laser enables wireless remote control operation of the CNC system via the Modbus TCP protocol, nagsuporta 12 buton, and supports real-time display of system coordinates and status.
2.Mga Features sa Produkto
1. 12 buton, 6 diin nagsuporta sa mga signal sa I/O.
2. Nagsuporta sa 2.8-pulgada nga color screen display.
3. Nagsuporta sa usa ka 9-level nga axis selector switch, nagsuporta hangtod sa 6-axis nga output.
4. Nagsuporta sa usa ka 3-level multiplier switch.
5. Supports one electronic remote control, 100 pulses/revolution.
6. Supports receiver Ethernet interface, Modbus TCP communication.
7. Supports standard Type-C charging, 5V-2A nga pagsingil sa detalye, built-in battery specifications 18650/12775mWh.
3.Binuhatan nga Nagtrabaho
PHB06B-Laser is connected to the user’s system via an Ethernet interface. It performs data interaction through the Modbus TCP protocol. The user system acts as the Modbus master station, which can transmit real-time system display coordinates and read information such as keys and axis selection of the PHB06B-Laser remote control, so as to realize real-time data communication.
Kwarta: For the specific protocol, please refer to the “3D 5-axis Laser Cutting – PHB06B – Laser – Modbus Protocol Description”.
4.Mga detalye sa produkto
| Madawat nga Koleksyon sa Gahum sa Pagdumala |
DC5V-DC24V |
| Button lifespan |
1,000,000 mga panahon |
| Operating Temperature |
-25℃ < X < 55℃
|
| Safe drop height |
1 m |
| Receiver port |
Eternet |
| Number of buttons |
12
|
| Display screen |
2.8-inch color screen
|
| wireless communication frequency |
433MHz band |
| Receiver sensitivity |
-100dbm
|
| Handheld transmit power |
15dbm
|
| Distansya sa Komunikasyon sa Komunikasyon |
100 meters barrier-free range |
| Rechargeable Battery Specification |
Rechargeable Battery Specification |
| Charging base power supply voltage |
DC24V / 1A |
|
Wired Charging Specification
|
Type-C charging port, DC 5V/2A |
5.Pasiuna sa Produkto
Malain:
① Power Switch
Used to turn the remote control on and off.
② Enable buttons on both sides
The enable button must be pressed while holding the remote control.
③Button area
12 buton
④ Axis Selection and Magnification Switch
One 9-gear axis selection switch; one 3-gear magnification switch.
⑤ Emergency Stop Switch
Remote control emergency stop switch.
⑥ Display Screen Area
It can display coordinates, status and other information.
⑦ Electronic Pulse Encoder
One electronic pulse encoder with 100 Pulses matag rebolusyon.
⑧ Type-C Charging Port
It is used for connection between the charger and the remote control.
The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key
6. Product Accessories Diagram
7. Receiver and Wiring Ports
8. Configure network access
10. Installation dimensions
Mga Dimensyon sa Pag-instalar sa Pagdawat
Usa: millimeters
Thickness: 29.6mm
11.Maintenance and upkeep
1. Palihug gamita kini sa usa ka uga nga palibot sa temperatura sa kwarto ug presyur aron mapalapdan ang kinabuhi sa serbisyo niini.
2. Do not use sharp objects to contact the button area to extend button life.
3. Please keep the appearance of the remote control clean to extend its service life.
4. Please avoid crushing, dropping, or bumping, ug uban pa. to prevent damage to the precision components
5. Avoid moisture and shock during storage and transportation.
12.Impormasyon sa Kaluwas
1. Palihug basaha og maayo ang mga panudlo sa wala pa gamiton ug gidili ang mga dili propesyonal gikan sa pag-operate.
2. If you repair it yourself and cause damage, the warranty will be void.
