Fanuc dedikeret trådløs elektronisk håndhjul

Beskrivelse

1.Produktintroduktion

Trådløst elektronisk håndhjul bruges til manuel vejledning, positionering, tool alignment,and other operations on CNC machine tools. Dette produkt anvender trådløs transmissionsteknologi, eliminerer den traditionelle fjedertrådsforbindelse, reducere udstyrsfejl forårsaget af kabler, eliminating the disadvantages of cable dragging and oil stains, og gøre operationen mere praktisk. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,forstørrelse, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.

2. Produktfunktioner
1. Vedtage 433MHz trådløs kommunikationsteknologi, Trådløs driftsafstand er 40 meter;
2. Vedtag automatisk frekvenshop-funktion, bruge 32 sets of wireless remote controllers at the same time without affecting each other;
3. Støtte nødstopknap, Skift IO -signaludgang, connected to the system through IO wiring;
4. Støtte 4 Brugerdefinerede knapper, Skift IO -signal, Outputsignal til systemet gennem IO-Link-protokol;
5. Støtt hurtig bevægelsesknap + og knap -, Tryk og hold på knappen for at udskifte håndhjulet for at flytte maskinen;
6. Understøtt 6-akset kontrol, Skift IO -signal, Outputsignal til systemet gennem IO-Link-protokol;
7. Support 1X,10x, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;

3.Product Specifications

4.Product Features

Noter:
①Nødstopknap:
Tryk på nødstopknappen, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Screen display:

③Custom Buttons:
4 Brugerdefinerede knapper, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Tryk og hold aktiveringsknappen nede, og ryst pulsencoderen for at sende en puls
signal til at styre bevægelsen af ​​maskinaksen.
⑨Power switch:
Handwheel power button.

5.Produkttilbehør diagram

6.Produktinstallationsvejledning

6.1 Produktinstallationstrin

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Se vores modtagerledningsdiagram, sammenligne det med dit udstyr på stedet, og tilslut
udstyret til modtageren via kabler.
3. Efter at modtageren er fikset, antennen udstyret med modtageren skal tilsluttes,
og den ydre ende af antennen skal installeres eller placeres uden for el-skabet.
Det anbefales at placere det på toppen af ​​det elektriske skab for den bedste signaleffekt. Det
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
hvilket kan medføre, at signalet bliver ubrugeligt.
4.Endelig, tænd for håndhjulets strømafbryder, og du kan betjene maskinen ved
håndhjuls fjernbetjening.

6.2 Modtagerinstallationsdimensioner

6.3 Modtager ledningsreferencediagram

7. Vedligeholdelse og pleje

1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
levetiden;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Undgå venligst at klemme, falder, støde, osv. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. Hvis ikke brugt i lang tid, Opbevar håndhjulet på et rent og sikkert sted;
6. Pay attention to moisture and shock during storage and transportation.

8. Security Information

1. Læs venligst instruktionerne omhyggeligt før brug. Non-professionals are prohibited from
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. Hvis reparation er påkrævet, Kontakt producenten. If the damage is caused by self-repair,
producenten giver ikke garanti.