Solicitud:used for various industrial equipment
1.Maximum 26 salidas de relé.
2.La distancia de transmisión sin barreras es 200 metros.
3. Maximum 4 channels of analog 0-10V output (display range can be customized): supports 2 channels of extended isolated digital potentiometer output;
4. 2 analog inputs; and displayed on the remote control, the display range can be customized.
5. 1 emergency stop relay output normally closed contact.
Modelo: DH01R-4W-26K
Applicable equipment:various industrial equipment
Nota: You can choose one of the three antennas. The suction cup antenna is standard by default.
Nota:
① DH01R series, if the suffix contains T, it means with emergency stop output;without T, significa sin salida de parada de emergencia.
②Si no hay salida analógica, no es necesario comentar 0W o 0R; las cantidades analógicas W1, W2, W3, y W4 por defecto a salida de voltaje analógico de 0-10V; al mismo tiempo, W1 y W2 se pueden ampliar a 2 salidas de potenciómetro digital aisladas, con una gama de 0 -5K ohmios, ½ vatio; resolución: 20 ohmios. Los dos potenciales digitales se pueden utilizar para controlar la corriente de soldadura y el voltaje de soldadura de la máquina de soldar.. Si se requiere la salida del potenciómetro digital, Se requieren notas de usuario..
④Entrada analógica, que van desde 1 a 2, indicating that there are 1 a 2 analog inputs(maximum 2 canales); when there is an analog input, you need to note the voltage range of the analog input (our receiver defaults to 0 -5V, the user can also note as 4-20 mA or 0-10V, etc.) and the corresponding display range of the analog quantity (for example: display 0-100 volts or 0-1000 amps)
These two analog quantities can be used as displays for welding current and welding voltage.
1）Maximum 26 salidas de relé;
2）Maximum 4 channels of analog 0-10V output (display range can be customized): supports 2 channels of extended isolated digital potentiometer output;
3）2 analog inputs; and displayed on the remote control, the display range can be customized
4）1 channels of emergency stop relay output normally closed contacts;
5） Powered by 3 Pilas AA, low power consumption design;
6） Wireless operation distance is 200 metros;
7）Protection grade IP67;
8）With cross switch operation, supports two 4-direction cross switches;
9）Back strap design.
W1 knob value: W1: 0-1000 (parameter adjustable 0-9999)
Valor de la perilla W2: W2: 0-5000 (parameter adjustable 0-9999)
Valor de la perilla W3: W3: 0-5000 (parameter adjustable 0-9999)
Valor de la perilla W4: W4: 0-5000 (parameter adjustable 0-9999)
Pantalla de retroalimentación ADC1: 0-1000 (parameter adjustable 0-5000)
Pantalla de retroalimentación ADC2: 0-1000 (parameter adjustable 0-5000)
Baja tensión: La batería del control remoto está demasiado baja, por favor reemplace la batería.
Red caída: La señal inalámbrica está interrumpida.. Comprueba la potencia del receptor., enciéndelo de nuevo, y reinicie el control remoto.
1） Encienda el control remoto
Cuando el receptor está encendido, el indicador de funcionamiento del receptor parpadea; instale dos baterías AA en el control remoto, Enciende el botón de encendido, and the display shows a value,indicating successful startup. The receiver working indicator light becomes solid.
2）Switch and button functions
Any operation of the twist switch and button on the remote control can control the corresponding switch signal output point on the receiver. All switch signal output points on the receiver are normally open signals by default;
3）W1-W4 speed adjustment
Rotate the knobs in W1-W4 arbitrarily to operate the corresponding analog output signal or potentiometer signal at the receiver end. The analog output signal at the receiver end defaults to a 0-10V voltage signal, and the potentiometer signal defaults to 0-5K;
4） Emergency stop function
When the emergency stop button is pressed, all switch signal outputs are disconnected and the analog output is disconnected; after the emergency stop is released, all switch signals are restored and the analog output is restored; 5 seconds after the remote control is turned off, all switch signal outputs are disconnected and the analog quantities remain unchanged. When the remote control is turned on, the switch signal outputs automatically recover;
5）Parameter menu (users are prohibited from modifying it privately)
Some functions of the remote control can be adjusted through parameters. When the display W1=0, press the K9-B button 3 times in a row, and then press the K9-A button 3 times in a row to enter the parameter menu; K9-A and K9-B key to page through the menu and select parameters; hold down K1-A, and then press the K9-A/B button to modify parameters;
Exit the parameter menu: choose to save or not save, and then press the K1-A button to confirm the exit;
F1W1 range: The display range value of the W1 knob on the display screen, adjustable from 0 a 9999;
F2W2 range: The display range value of the W2 knob on the display screen, adjustable from 0 a 9999;
F3W3 range: The display range value of the W3 knob on the display screen, adjustable from 0 a 9999;
F4W4 range: The display range value of the W4 knob on the display screen, adjustable from 0 a 9999
F5A1 range: Display ADC1 feedback display range value, 0-5000 adjustable;
F6A2 range: Display ADC2 feedback display range value, 0-5000 adjustable;
Alarm current: Set the alarm value for ADC1 and ADC2 feedback display. When ADC1 and ADC2 exceed this value, the remote control display will alarm; when this value is 0,the alarm function is invalid;
The final interpretation right of this product belongs only to our company.
Reseñas
Aún no hay reseñas.