1. 12 tombol, 6 of which support I/O signals.
2. Supports 2.8-inch color screen display.
3. Supports one 9-level axis selector switch, supporting up to 6-axis output.
4. Supports one 3-level multiplier switch.
Programmable CNC Wireless Remote Control PHB06B-LASER
Keterangan
1.Pengenalan Produk
The PHB06B-Laser enables wireless remote control operation of the CNC system via the Modbus TCP protocol, mendukung 12 tombol, and supports real-time display of system coordinates and status.
2.Fitur Produk
1. 12 tombol, 6 of which support I/O signals.
2. Supports 2.8-inch color screen display.
3. Supports one 9-level axis selector switch, supporting up to 6-axis output.
4. Supports one 3-level multiplier switch.
5. Supports one electronic remote control, 100 pulses/revolution.
6. Supports receiver Ethernet interface, Modbus TCP communication.
7. Supports standard Type-C charging, 5Spesifikasi pengisian daya V-2A, built-in battery specifications 18650/12775mWh.
3.Prinsip kerja
PHB06B-Laser is connected to the user’s system via an Ethernet interface. It performs data interaction through the Modbus TCP protocol. The user system acts as the Modbus master station, which can transmit real-time system display coordinates and read information such as keys and axis selection of the PHB06B-Laser remote control, so as to realize real-time data communication.
Catatan: For the specific protocol, please refer to the “3D 5-axis Laser Cutting – PHB06B – Laser – Modbus Protocol Description”.
4.Spesifikasi Produk
| Tegangan catu daya penerima | DC5V-DC24V |
| Button lifespan | 1,000,000 kali |
| Operating Temperature |
-25℃ < X < 55℃
|
| Safe drop height | 1 M |
| Receiver port | Ethernet |
| Number of buttons |
12
|
| Tampilan layar |
2.8-inch color screen
|
| wireless communication frequency | 433MHz band |
| Receiver sensitivity |
-100dBm
|
| Handheld transmit power |
15dBm
|
| Jarak komunikasi nirkabel | 100 meters barrier-free range |
| Rechargeable Battery Specification | Rechargeable Battery Specification |
| Charging base power supply voltage | DC24V/1A |
|
Wired Charging Specification
|
Type-C charging port, DC 5V/2A |
5.Pengenalan Fungsi Produk
Catatan:
① Power Switch
Used to turn the remote control on and off.
② Enable buttons on both sides
The enable button must be pressed while holding the remote control.
③Button area
12 tombol
④ Axis Selection and Magnification Switch
One 9-gear axis selection switch; one 3-gear magnification switch.
⑤ Emergency Stop Switch
Remote control emergency stop switch.
⑥ Display Screen Area
It can display coordinates, status and other information.
⑦ Electronic Pulse Encoder
One electronic pulse encoder with 100 pulsa per revolusi.
⑧ Type-C Charging Port
It is used for connection between the charger and the remote control.
The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key
6. Product Accessories Diagram
7. Receiver and Wiring Ports
8. Configure network access
9. Test Instructions
10. Installation dimensions
Dimensi pemasangan penerima
Satuan: millimeters
Thickness: 29.6mm
11.Maintenance and upkeep
1. Silakan gunakan di lingkungan kering pada suhu dan tekanan kamar untuk memperpanjang masa pakainya.
2. Do not use sharp objects to contact the button area to extend button life.
3. Please keep the appearance of the remote control clean to extend its service life.
4. Please avoid crushing, dropping, or bumping, dll.. to prevent damage to the precision components
5. Avoid moisture and shock during storage and transportation.
12.Informasi Keselamatan
1. Harap baca instruksi dengan seksama sebelum digunakan dan melarang non-profesional mengoperasikannya.
2. If you repair it yourself and cause damage, the warranty will be void.
