Tali mobil nyusup Saw saweroung remot kontrol dh22s-ld-485

Katrangan

1. Pambuka Produk

The remote control for automatic cutting of track car rope saw is suitable for track type rope saw
cutting machines. It uses the 485 Modbus RTU protocol to control the left and right track frequency
converters, as well as the large motor frequency conversion speed control start and the front, rear,
left and right direction controllers. And it can read the working current of the large motor frequency
converter through the 485 Modbus RTU protocol. By analyzing and comparing the current of the
large motor, the speed of the left and right tracks can be automatically adjusted in real time to
achieve automatic cutting function.

2. Fitur fungsi produk

1. Adopting 433MHz wireless communication technology, with a wireless operating distance of 100 meter.
2. Adopt automatic frequency hopping function and use 32 sets of wireless remote controllers
simultaneously, tanpa mengaruhi saben liyane.
3. Supports all frequency converters with 485 Modbus RTU protocol, and currently compatible frequency
converter brands include:Shanghai Xielin, Fuji, Huichuan, Zhongchen, Invt, lan . For brands
that are not compatible, please contact us for customization.
4. Dhukungan Regulasi Kacepetan, Miwiti, lan maca saiki saka konversi frekuensi motor gedhe.
5. Ndhukung Penaturan Kecepetan Frekuensi kiwa lan tepat, Miwiti, ngarep, Mbalik, Ngontrol kiwa lan tengen.
6. Ndhukung linier koreksi konverter frekuensi kiwa kiwa lan lerak kanggo njaga mesin sing mlaku ing a
Lurus Lurus.
7. Support automatic cutting function of rope saw, automatically adjust the left and right track speed in
real time according to the current information of the large motor.
8. It is also compatible with direct IO output control for motor start and stop, and analog voltage output
control for motor speed.

3. Spesifikasi Produk

4. Product Function Introduction

Cathetan:
Tampilan layar:

Swara ②mode:

③Enable:
Kancing kombinasi, Sawetara operasi mbutuhake nyekel tombol Aktifake kanggo operasi,see the instructions for each switch for details.
④Large motor switch:
Nggunakake saklar reset 3-kacepetan, Narik swithi iki bisa ngontrol rotasi maju lan motor gedhe saka motor gedhe. Sawise ngeculake, Negara bakal tetep, lan bakal ana tampilan sing cocog ing layar. The S1↑ arrow indicates forward rotation, and the S1 ↓ arrow indicates everse rotation.
⑤small motor maju / mbalikke ngalih:
The small motor is equipped with a 3-speed self-locking switch in front of it. Pressing the enable button and pulling this switch can control the small motor to move forward and backward, and the corresponding display will appear on the screen.The ↑↑ arrow represents forward, and the ↓↓ arrow represents backward.
⑥ Straight line correction:
Nggunakake tombol konfigurasi multi, press the enable button, turn the knob right, and display the straight line correction: DF: The left turn knob increases by 1 unit per rotation, and the left
motor speed increases by 0.1 unit; Giliran tombol kiwa, Tampilan koreksi Lurus: DF: On the right, every turn of the knob increases by 1 unit, and the speed of the right motor increases
by 0.1 unit.
⑦Small motor turning switch:
Nggunakake saklar reset 3-kacepetan, Yen wis dilakokno kanthi manual, motor cilik bisa dikendhaleni kanggo ngiwa utawa nengen. Sawise dirilis, the remote control will automatically stop this action. In the forward state, when this switch is turned, the corresponding display will appear on the screen. The ←↑ arrow indicates left turn, and the ↑→ arrow indicates right turn.When in reverse mode, turn this switch and the corresponding display will appear on the screen. The ←↓ arrow indicates left turn, and the ↓→ arrow indicates right turn.
Regulasi kacepetan motor gedhe:
Nggunakake tombol konfigurasi multi, rotating 1 Grid saben wektu, Nilai kacepetan motor gedhe diganti kira-kira 0.2 Unit. Fast rotation can quickly modify the speed value of the large motor.
⑨ Small motor speed regulation:
Nggunakake tombol konfigurasi multi, ing mode manual, press the enable button and then rotate one grid at a time，the speed value of the left and right small motors changes by about 0.1 Unit, and quick rotation can quickly modify the speed value of the small motor.In automatic mode, press the enable button and rotate one grid at a time,the speed limit value F of the small motor changes by approximately 0.1 Unit. Rapid rotation can quickly modify the speed limit value of the small motor.
⑩ Remote control power switch
Layar Tampilan Kontrol Remot diuripake.

5. Diagram aksesoris produk

6. Pandhuan instalasi Produk
6.1 Langkah-langkah instalasi Produk
1. Install the receiver into the electrical cabinet through the buckle on the back, or install it into the cabinet through the screw holes at the four corners of the receiver.
2. Rujuk diagram panrima wiring kita lan mbandhingake karo peralatan ing situs sampeyan. Connect the equipment to the receiver through wires.
3. Sawise ndandani panrima, it is necessary to connect the antenna equipped with the receiver and install or place the outer end of the antenna outside the electrical cabinet. Apike kanggo nyelehake ing ndhuwur kabinet listrik kanggo efek sinyal paling apik. It is forbidden to leave the antenna unconnected or place it inside the electrical cabinet, as it may cause the signal to be unusable.
4. Pungkasane, install the battery on the remote control, ngencengi tutup baterei, and turn on the power switch of the remote control. After the remote control display screen shows the normal
working interface, remote control operations can be performed.

6.2 Ukuran Instalasi Panampa

6.3 Diagram referensi wiring wiring panrima

7. Pandhuan operasi produk
7.1 Setelan parameter kontrol remot
Method to enter the remote control backend parameters:

Turn the mode switch to manual mode, nyetel kacepetan motor cilik kanggo 25 on both sides, utawa 0, 10, 20, 40, 50 on all sides, and continuously turn the forward switch of the large motor up 3 times and down 3 kaping;
Gunakake “Kontrol Kacepetan Motor Cilik” knob to flip pages, press the enable button, and then turn the small motor speed control knob to modify parameters. After modification, Nguripake kaca kasebut,Pilih “Save” to exit, and press the enable button to exit the menu;
Paramèter kaya ing ngisor iki:
Saiki maksimal: feedback range of large motor current, set range 15-200A, Default 100;
Paramèter kontrol kacepetan: Automatic mode, small motor automatically accelerates faster or slower,sing luwih cilik luwih cepet, set range 200-1500, Default 800;
Parameter deceleration: Set the upper limit that allows the motor speed to change. Nalika pangowahan saiki ngluwihi nilai kasebut, the deceleration will occur. The smaller, the faster the deceleration of the left and right motors, kanthi sawetara 05-12 and a default of 06;
Nyepetake A1: The larger the motor speed, the faster it increases, kanthi sawetara 00-06 and a default of 01;
Deceleration A2: The larger the motor speed, the faster it decreases, kanthi sawetara 00-06 and a default of 02;
Aktifake Regulasi Kemahatan: Does the small motor speed regulation need to be enabled? 00 does not enable, 01 enables, default is 01;
Start self-locking: Does the large motor automatically maintain self-locking after the forward and reverse switches are released? 00 does not hold, 01 holds, Default 01
Maximum walking: maximum speed of left and right motors, kisaran 10-100, Default 50;
Nglereni Saiki: maximum cutting current, displayed on the screen as IC value, kisaran 15-160, Default 30,
corresponding to IC: 30 displayed on the screen. The upper limit of this parameter is 80% of the maximum current;
Watesan kacepetan standar: The default small motor automatic cutting speed when turned on is within the range of 0-100, with a default of 10. The screen displays F1.0, and this parameter is only accurate when the maximum walking is set to 50.
Automatic mode: Set to 00, the automatic/manual switch is a mode switch. Set to 01, the automatic/manual switch is set to the automatic position, the display screen shows lighting, and the automatic terminal output on the receiver is closed. When set to manual, the automatic output terminal is disconnected;
Speed limit deviation: The upper limit of the automatic cutting speed of the small motor ranges from 00 menyang 200, with a default of 60 and a corresponding display of 6.0 on the screen; Upper limit of display value=speed limit offset x 0.1;
Host maksimal: maximum speed of the large motor, kisaran 10-100, Default 50;
Mbus equipment (wajib): Selection of large motor frequency converter model, kisaran 00-03, Default 03;
00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon)
Peralatan Sbus (wajib): Pilihan model motor motor cilik, kisaran 00-05, Default 03;

00- Shanghai Xielin 01-Fuji
02-INVT 03-Inovance（Zhongchen, Robicon)

04-Anchuanda 05-Ora

7.2 Paramèter Setting Konverter Frekuensi
1. Pilihan Sumber Prentah: Saluran Komunikasi Komunikasi
2. Pilihan sumber frekuensi utama: Komunikasi sing diwenehake
3. Rating baud: 19200
4. Format data: Ora verifikasi, Format data<8-N-1>
5. Alamat Lokal: Setel konverter frekuensi kiwa menyang 1, konverter frekuensi sing tepat kanggo 2, lan
the large motor frequency converter to 3
7.3 Pandhuan operasi kontrol remot
1. Daya ing mesin, Nguripake kontrol remot, enter the remote control backend, set the
remote control backend parameters, mainly setting the small motor and large motor frequency
converter models: (Langsung langkah iki yen produsen mesin wis ngeset);
2. Setel paramèter konverter frekuensi (skip this step if the machine manufacturer
has already set it);
3. Setel remot kontrol menyang mode manual, and then use the remote control to move the machine to
the working position;
4. Ing mode manual, set the cutting current of the large motor to IC and the speed of the large motor
5. Ngalih menyang mode otomatis lan nyetel watesan kacepetan sing nglereni kanggo motor cilik;
6. Ing mode otomatis, Nguripake saklar motor gedhe kanggo maju motor gedhe, then turn
the small motor switch to forward or reverse, and the remote control enters automatic cutting
mode to start cutting.

8.Ngatasi masalah produk

9.Pangopènan
1. Mangga nggunakake ing lingkungan garing ing suhu kamar lan tekanan kanggo ngluwihi layanan.
2. Aja nggunakake ing lingkungan sing ora normal kayata udan lan banyu kanggo ngluwihi layanan layanan kasebut.
3. Tansah kompartemen baterei lan area shrapnel logam resik.
4. Aja nganti ngrusak remot kontrol amarga nyepelekake lan tiba.
5. Yen ora digunakake kanggo wektu sing suwe, please remove the battery and store the remote control and battery in a clean
and safe place.
6.Sajrone panyimpenan lan transportasi, Perhatian kudu dibayar kanggo kelembapan lan resistensi kejut.

10. Informasi safety
1. Mangga maca pandhuan kanthi ati-ati sadurunge digunakake lan nglarang profesional saka operasi.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by
insufficient power, sing bisa nyebabake remot kontrol ora bisa digunakake.
3. Yen ndandani dibutuhake, Hubungi pabrikan. Yen karusakan disebabake perbaikan dhewe, the manufacturer
will not provide warranty.