Kawat Saw Rach mesin otomatis Ngethok Kontrol remot nirkabel dh12s-p6s

Katrangan

1.Model Produk

Model: DH12S-P6S

Peralatan sing ditrapake:mesin wire saw/blade saw

2.Diagram aksesoris produk

Cathetan: Sampeyan bisa milih salah siji saka telung antena. Antena Piala Sukses minangka standar kanthi standar.

3.Katrangan Ngalih Kontrol Remot

4.Pambuka tampilan isi

Kacepetan motor utama: Utama: 0-50
kacepetan motor traveling: baris: 0-50
Watesan kacepetan maksimum motor lelungan otomatis: Kacepetan: 0-30
(paramèter luwes)
Otomatis nglereni motor utama saiki setelan: Setelan: 28 (paramèter luwes)
Swing arm kacepetan motor: Swing: 0-50

Tegangan sithik: Baterei kontrol remot kurang sithik, Mangga ngganti baterei.

Jaringan mudhun: Sinyal nirkabel diganggu. Mangga priksa kekuwatan panrima, kekuwatan maneh, lan miwiti maneh kontrol remot.

5.Pandhuan Operasi Fungsi Kontrol Remot

1） Nyalakan remote control

Nalika panrima wis entek, lampu daya D2 ing panrima tansah ing, lan lampu sinyal D1 wiwit sumunar; Instal rong baterei AA ing remot kontrol, Nguripake saklar daya, lan tampilan bakal nuduhake kacepetan motor, nuduhake wiwitan sukses.

2）Regulasi motor lan kacepetan gedhe/Motor utama lan regulasi kacepetan

Pencet terus “Regulasi Kacepetan Aktifake”, nguripake ing “Maju / Mundur” ngalih menyang maju, lan motor utama panrima bakal nguripake;
Pencet terus “Regulasi Kacepetan Aktifake”, nguripake ing “Maju / Mundur” ngalih menyang mbalikke, lan motor utama panrima bakal mbalikke lan nguripake;Cukup pindhah saklar menyang tengah utawa arah mbalikke, lan motor utama bakal mandheg langsung tanpa mencet tombol ngaktifake kontrol kacepetan;Puter ing “motor gedhe” tombol kanggo nyetel voltase regulasi kacepetan saka inverter motor utama panrima kanggo 0-10V;

3（Motor traveling

Pencet terus “Imbuhan kacepetan Aktifake”, nguripake ing “Maju / Mundur” ngalih menyang maju utawa mundur, lan motor lumampah bakal pindhah ing kacepetan dhuwur saka 50;

4） Motor lengen ayun lan regulasi kacepetan

Nguripake “Swing Arm / Mbalik” ngalih menyang swing arm utawa mundur, lan motor lengen swing panrima diwiwiti; banjur muter ing “Imbuhan kacepetan” tombol kanggo nyetel kacepetan motor lengen ayun;

Pencet terus “Imbuhan kacepetan Aktifake”, banjur narik “Swing Arm / Mbalik” ngalih, motor lengen swing bakal pindhah ing kacepetan dhuwur saka 50;

5） Penyesuaian watesan kacepetan motor travel

Pencet terus tombol “pangaturan kacepetan ngaktifake” tombol lan muter ing “imbuhan kacepetan” to adjust the maximum speed limit of the traveling motor during automatic cutting;

6） Automatic cutting

The first step is to start the main motor; the second step is to adjust the maximum speed limit of the walking motor; the third step is to move the “forward/reverse” switch forward or backward to enter the automatic cutting mode;

7） Parameter menu (users are prohibited from modifying it without permission)

Enter the parameter menu:Ing mode manual, when the main motor speed is 0, push the forward/reverse switch up three times in a row, and then push it down three times in a row to enterthe parameter menu;
Metu menu paramèter: Turn the speed adjustment knob, select save or not save, and press the enable button to confirm;
Rated current: The maximum value of the main motor current, unit Ampere;
Speed adjustment parameters: Paramèter kontrol nglereni otomatis, Default 800, unit mili detik,modifikasi dilarang;
Parameter deceleration: Nalika nglereni nilai pangowahan saiki ngluwihi nilai iki, deceleration cepet wiwit, unit Ampere;
Nyepetake A1: Nalika nglereni saiki luwih murah tinimbang nyetel saiki nglereni, Nilai kacepetan tambah dening saben percepatan saka motor lumampah;
Deceleration A2: Nalika nglereni saiki luwih dhuwur tinimbang nyetel nglereni saiki, Nilai kacepetan suda dening saben deceleration saka motor lumampah;
Arus lengan ayun: Nilai standar, modifikasi dilarang;
Mungkasi wektu: Sawise mode otomatis mati overload saiki, saiki bakal dideteksi maneh sawise sawetara wektu. Yen kurang saka saiki nyetel, motor mlaku bakal kanthi otomatis miwiti; unit kapindho, nilai standar, modifikasi dilarang;
Saiki maksimal: Kisaran arus umpan balik motor utama, unit Ampere;
Host maksimal: Remot kontrol utama motor kacepetan imbuhan sawetara tampilan;
Lumampah maksimal: Parameter ora valid;
Watesan watesan watesan: During automatic cutting, the remote control display walking motor speed limit = 50% of this parameter;
Increase sensitivity: When the main motor feedback current increases, each time the increase exceeds this value, the walking motor accelerates;
Decrease sensitivity: When the feedback current of the main motor decreases, and each time the decreasing value exceeds this value, the walking motor decelerates;
Sensitivity offset: Add and subtract the offset increment of the sensitivity parameter;
Set current: Automatic cutting, the threshold of main motor feedback current. If this value is exceeded,the walking motor starts to decelerate;Below this value, the walking motor starts to accelerate;unit: Ampere;
Idling exit: When the automatic mode starts, if the main motor feedback current is less than this value,it will be in the idling mode.If it is greaterthan this value, it will exit the idling mode and enter the cutting mode.Unit is ampere;
No-load current:When automatic mode starts, if the main motor feedback current is less than this value,it is in no-load mode.If it is greaterthan this value, it will exit the no-load mode and enter the cutting mode.Unit is Ampere;
Swing arm speed: Initial speed of swing arm motor when starting up;
Cutting mode: Switch between blade saw and wire saw modes, and the parameters will switch accordingly after the switch; in blade saw mode, the remote control display adds a swing arm motor, while in wire saw mode, there is no swing arm motor;
Debounce time: When the main motor feedback current exceeds the stop current, the feedback current will be continuously detected. Wektu debounce yaiku durasi deteksi terus-terusan iki. Sawise wektu iki, yen arus motor utama isih ngluwihi arus mandeg, motor mlaku bakal mandheg;yen ora, motor mlaku bakal mandheg. Motor bakal tetep mlaku;
Mungkasi saiki: Arus umpan balik motor utama ngluwihi nilai kasebut, lan motor mlaku bakal mandheg;Unit punika Ampere;
Offset standar: Nilai awal saka watesan kacepetan motor lumampah nalika remot kontrol diuripake = 50% saka nilai iki;

6.Karakteristik Listrik Kontrol Remot

7.Ukuran Kontrol Remot

Interpretasi pungkasan saka produk iki mung kanggo perusahaan kita.