Handwheel elektronik wireless Fananc

Katrangan

1.Pambuka Produk

Tangan tangan elektronik nirkabel digunakake kanggo tuntunan manual, posisi, tool alignment,and other operations on CNC machine tools. Produk iki nggunakake teknologi transmeless nirkabel, Ngilangi Sambungan Kabel Musim semi Tradisional, nyuda gagal peralatan sing disebabake kabel, eliminating the disadvantages of cable dragging and oil stains, and making operation more convenient. This model of wireless electronic handwheel is a dedicated handwheel for the Fanuc system. The Fanuc system coordinates are displayed in real-time on the handwheel screen through the IO-LINK protocol, and the axis selection,Magnifikasi, and button signals are directly connected to the system through the IO-LINK protocol, reducing wiring.

2. Fitur Produk
1. Teknologi Komunikasi Wireless Wireless 433MHZ, Jarak Operasi Wireless yaiku 40 meter;
2. Fungsi Frekuensi Hopping Otomatis, Gunakake 32 sets of wireless remote controllers at the same time without affecting each other;
3. Dhukungan tombol mandeg darurat, Output Signal Io, connected to the system through IO wiring;
4. Dhukungan 4 Kancing Custom, Signal IO, sinyal output menyang sistem liwat protokol link;
5. Dhukungan Tombol Gerakan Cepet + lan tombol -, penet terus tombol kanggo ngganti tangan kanggo mindhah mesin;
6. Ndhukung Kontrol 6 Axis, Signal IO, sinyal output menyang sistem liwat protokol link;
7. Support 1X,10x, 100X control . Support switch l0 signal, and outputs signals to the system via IO-LINK protocol;
8. Support enable button function, connect to the system through IO wiring, and control encoder enable at the same time;
9. Support pulse encoder, 100 pulses/circle, access the system MPG handwheel interface by outputting AB encoding signal;

3.Product Specifications

4.Product Features

Cathetan:
①Emergency stop button:
Pencet tombol mandeg darurat, the two emergency stop IO outputs on the receiver are disconnected, and all handwheel functions are invalid.After the emergency stop is released, the emergency stop IO output on the receiver is closed and all functions of the handwheel are restored.

②Screen display:

③Custom Buttons:
4 Kancing Custom, each button corresponds to an IO output point on the receiver, connected to the system through IOLINK. Generally, the ~ button is set as a high-speed button.
④Axis selection switch:
Switching the axis selection switch can switch the moving axis controlled by the handwheel.
⑤Shortcut buttons:
Press the shortcut button “+ ”to move the machine forward, and press the short cut button “-” to move the machine negatively. This can replace turning the hand wheel to move the machine.
⑥Enable button:
Press and hold any one of the enable buttons on both sides and shake the pulse encoder to be effective. And the two groups of enable IO outputs on the receiver are turned on. Release the enable button and the enable IO output is disconnected.
⑦Ratio switch:
Switching the magnification switch can switch the magnification of handwheel control.
⑧Pulse encoder:
Pencet terus tombol Aktifake lan goyangake encoder pulsa kanggo ngirim pulsa
sinyal kanggo ngontrol gerakan sumbu mesin.
⑨Power switch:
Handwheel power button.

5.Diagram aksesoris produk

6.Pandhuan instalasi Produk

6.1 Langkah-langkah instalasi Produk

1. Install the receiver in the electrical cabinet through the screw holes at the four corners.
2.Rujuk diagram kabel panrima kita, Bandhingake karo peralatan ing situs sampeyan, lan nyambung
peralatan menyang panrima liwat kabel.
3. Sawise panrima tetep, Antena sing dilengkapi karo panrima kudu nyambung,
lan mburi antena utama kudu diinstal utawa dilebokake ing njaba kabinet listrik.
Apike kanggo nyelehake ing ndhuwur kabinet listrik kanggo efek sinyal paling apik. Iku
is prohibited to leave the antenna unconnected or place the antenna inside the electrical cabinet,
sing bisa nyebabake sinyal ora bisa digunakake.
4.Pungkasane, Nguripake saklar daya tangan lan sampeyan bisa ngoperasikake mesin kasebut
Kontrol Remot Handwheel.

6.2 Ukuran Instalasi Panampa

6.3 Diagram referensi wiring wiring panrima

7. Pangopènan lan perawatan

1. Please use it in a dry environment with normal temperature and pressure to extend the
service life;
2. Please avoid using it in abnormal environments such as rain and water bubbles to extend
layanan layanan;
3. Please keep the appearance of the handwheel clean to extend the service life;
4. Aja nganti nyepelekake, Mudhun, nabrak, lsp. to prevent damage to the precision parts
inside the handwheel or cause precision errors;
5. Yen ora digunakake kanggo wektu sing suwe, Mangga simpen tangan ing papan sing resik lan aman;
6. Pay attention to moisture and shock during storage and transportation.

8. Security Information

1. Mangga maca pandhuan kanthi ati-ati sadurunge digunakake. Non-professionals are prohibited from
operating.
2. Please replace the battery in time when the battery is too low to avoid errors caused by
insufficient power causing the handwheel to be unable to operate.
3. Yen ndandani dibutuhake, Hubungi pabrikan. If the damage is caused by self-repair,
Pabrikan ora bakal menehi garansi.