1. 12 knappar, 6 of which support I/O signals.
2. Supports 2.8-inch color screen display.
3. Supports one 9-level axis selector switch, supporting up to 6-axis output.
4. Supports one 3-level multiplier switch.
Wireless Remote Control for 3D Five-Axis Laser Cutting：PHB06B-LASER
Beskrivning
1.Produktintroduktion
The PHB06B-Laser enables wireless remote control operation of the CNC system via the Modbus TCP protocol, stödja 12 knappar, and supports real-time display of system coordinates and status.
2.Produktfunktioner
1. 12 knappar, 6 of which support I/O signals.
2. Supports 2.8-inch color screen display.
3. Supports one 9-level axis selector switch, supporting up to 6-axis output.
4. Supports one 3-level multiplier switch.
5. Supports one electronic remote control, 100 pulses/revolution.
6. Supports receiver Ethernet interface, Modbus TCP communication.
7. Supports standard Type-C charging, 5V-2A-laddningsspecifikation, built-in battery specifications 18650/12775mWh.
3.Arbetsprincip
PHB06B-Laser is connected to the user’s system via an Ethernet interface. It performs data interaction through the Modbus TCP protocol. The user system acts as the Modbus master station, which can transmit real-time system display coordinates and read information such as keys and axis selection of the PHB06B-Laser remote control, so as to realize real-time data communication.
Notera: For the specific protocol, please refer to the “3D 5-axis Laser Cutting – PHB06B – Laser – Modbus Protocol Description”.
4.Produktspecifikationer
| Mottagarens strömförsörjningsspänning | DC5V-DC24V |
| Button lifespan | 1,000,000 gånger |
| Operating Temperature |
-25℃ < X < 55℃
|
| Safe drop height | 1 m |
| Receiver port | Eternet |
| Number of buttons |
12
|
| Skärm |
2.8-inch color screen
|
| wireless communication frequency | 433MHz band |
| Receiver sensitivity |
-100dBm
|
| Handheld transmit power |
15dBm
|
| Trådlöst kommunikationsavstånd | 100 meters barrier-free range |
| Rechargeable Battery Specification | Rechargeable Battery Specification |
| Charging base power supply voltage | DC24V/1A |
|
Wired Charging Specification
|
Type-C charging port, DC 5V/2A |
5.Produktfunktion Introduktion
Anteckningar:
① Power Switch
Used to turn the remote control on and off.
② Enable buttons on both sides
The enable button must be pressed while holding the remote control.
③Button area
12 knappar
④ Axis Selection and Magnification Switch
One 9-gear axis selection switch; one 3-gear magnification switch.
⑤ Emergency Stop Switch
Remote control emergency stop switch.
⑥ Display Screen Area
It can display coordinates, status and other information.
⑦ Electronic Pulse Encoder
One electronic pulse encoder with 100 pulser per varv.
⑧ Type-C Charging Port
It is used for connection between the charger and the remote control.
The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key
6. Product Accessories Diagram
7. Receiver and Wiring Ports
8. Configure network access
9. Test Instructions
10. Installation dimensions
Monteringsmått för mottagare
Enhet: millimeters
Thickness: 29.6mm
11.Maintenance and upkeep
1. Använd den i en torr miljö vid rumstemperatur och tryck för att förlänga dess livslängd.
2. Do not use sharp objects to contact the button area to extend button life.
3. Please keep the appearance of the remote control clean to extend its service life.
4. Please avoid crushing, dropping, or bumping, etc. to prevent damage to the precision components
5. Avoid moisture and shock during storage and transportation.
12.Säkerhetsinformation
1. Vänligen läs instruktionerna noggrant före användning och förbjud icke-professionella att använda.
2. If you repair it yourself and cause damage, the warranty will be void.
