1. 12 按鈕, 6 其中支援I/O訊號.
2. 支援2.8吋彩屏顯示.
3. 支援1個9級軸選擇開關, 最多支援6軸輸出.
4. 支援1個三級倍頻開關.
3D 五軸雷射切割無線遙控：PHB06B-激光
描述
1.產品簡介
The PHB06B-Laser enables wireless remote control operation of the CNC system via the Modbus TCP protocol, 支持 12 按鈕, and supports real-time display of system coordinates and status.
2.產品功能
1. 12 按鈕, 6 其中支援I/O訊號.
2. 支援2.8吋彩屏顯示.
3. 支援1個9級軸選擇開關, 最多支援6軸輸出.
4. 支援1個三級倍頻開關.
5. Supports one electronic remote control, 100 pulses/revolution.
6. Supports receiver Ethernet interface, Modbus TCP communication.
7. Supports standard Type-C charging, 5V-2A充電規範, built-in battery specifications 18650/12775mWh.
3.工作原理
PHB06B-Laser is connected to the user’s system via an Ethernet interface. It performs data interaction through the Modbus TCP protocol. The user system acts as the Modbus master station, which can transmit real-time system display coordinates and read information such as keys and axis selection of the PHB06B-Laser remote control, so as to realize real-time data communication.
筆記: For the specific protocol, please refer to the “3D 5-axis Laser Cutting – PHB06B – Laser – Modbus Protocol Description”.
4.產品規格
| 接收器電源電壓 | DC5V-DC24V |
| Button lifespan | 1,000,000 次 |
| Operating Temperature |
-25℃ < x < 55℃
|
| Safe drop height | 1 m |
| Receiver port | 以太網 |
| Number of buttons |
12
|
| 顯示屏 |
2.8-inch color screen
|
| wireless communication frequency | 433MHz band |
| Receiver sensitivity |
-100分貝
|
| Handheld transmit power |
15分貝
|
| 無線通訊距離 | 100 meters barrier-free range |
| Rechargeable Battery Specification | Rechargeable Battery Specification |
| Charging base power supply voltage | 直流24V/1A |
|
Wired Charging Specification
|
Type-C charging port, DC 5V/2A |
5.產品功能介紹
筆記:
① Power Switch
Used to turn the remote control on and off.
② Enable buttons on both sides
The enable button must be pressed while holding the remote control.
③Button area
12 按鈕
④ Axis Selection and Magnification Switch
One 9-gear axis selection switch; one 3-gear magnification switch.
⑤ Emergency Stop Switch
Remote control emergency stop switch.
⑥ Display Screen Area
It can display coordinates, status and other information.
⑦ Electronic Pulse Encoder
One electronic pulse encoder with 100 每轉脈衝數.
⑧ Type-C Charging Port
It is used for connection between the charger and the remote control.
The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key
6. Product Accessories Diagram
7. Receiver and Wiring Ports
8. Configure network access
9. Test Instructions
10. Installation dimensions
接收器安裝尺寸
單元: millimeters
Thickness: 29.6mm
11.Maintenance and upkeep
1. 請在室溫和壓力下在乾燥的環境中使用它以延長其使用壽命.
2. Do not use sharp objects to contact the button area to extend button life.
3. Please keep the appearance of the remote control clean to extend its service life.
4. Please avoid crushing, dropping, or bumping, ETC. to prevent damage to the precision components
5. Avoid moisture and shock during storage and transportation.
12.安全信息
1. 請在使用前仔細閱讀說明，並禁止非專業人員操作.
2. If you repair it yourself and cause damage, the warranty will be void.
