Saghas
1. Tabhairt isteach táirge
The crawler vehicle rope saw automatic cutting remote control is suitable for crawler rope saw cutting machines. It adopts 485ModbusRTU protocol to control the speed start and front and rear left and right direction control of the left and right crawler inverters, as well as the large motor frequency conversion RTU protocol to control the speed start and front and rear left and right direction control of the left and right crawler inverters, and the large motor frequency conversion over-current analysis and comparison, automatically adjust the left and right crawler speeds in real time to achieve automatic cutting function.
2. Gnéithe Táirgí
1. Teicneolaíocht Cumarsáide Gan Sreang 433MHz a ghlacadh, Tá fad oibríochta gan sreang 100 méadar.
2. Feidhm hopping minicíochta uathoibríoch a ghlacadh, úsáid a bhaint as 32 sets of wireless remote controllers at the same time, gan cur isteach ar a chéile.
3. Support all inverters with 485-Modbus RTU protocol. The inverter brands that have been adapted include:Shanghai Xielin, fui, Inovance, Zhongchen, INVT, Anchuanda. If the brand is not ada please contact us for customization.
4. Support large motor inverter start, speed regulation, and current reading.
5. Support left and right crawler inverter speed regulation, start, front and back left and right control.
6. Support left and right crawler inverter straight line correction to keep the machine moving in a straight line.
7. Support rope saw automatic cutting function, automatically adjust the left and right crawler speed in real time according to the large motor current information.
8. At the same time, it is compatible with direct IO output to control the start and stop of the motor, and analog voltage output to control the motor speed.
3. Sonraíochtaí Táirgí
4. Réamhrá Feidhm Táirgí
Nótaí:
① Taispeáint scáileáin:
② Mód lasc:
Using a 2-level switch, it is possible to switch between automatic and manual modes, and the corresponding mode will be displayed on the screen for switching.
③ Enable:
Cnaipí teaglaim, Éilíonn roinnt oibríochtaí an cnaipe cumasaithe a choinneáil síos le haghaidh oibriú, please refer to the instructions for each switch for details.
④ Large motor switch:
Ag baint úsáide as lasc athshocraithe 3-luas, is féidir leis an lasc seo uainíocht ar aghaidh agus droim ar ais an mhótair mhóir a rialú. Tar éis é a scaoileadh, fanfaidh an stát, agus beidh taispeántais chomhfhreagracha ar an scáileán. The t arrow indicates forward rotation, and the y arrow indicates reverse rotation.
⑤ Mótar beag chun tosaigh / lasc droim ar ais:
Using a 3-speed self-locking switch, pulling this switch can control the small motor to move forward and backward. The corresponding display will show on the screen, with the t arrow indicating forward and the ↓ arrow indicating backward.
⑥Remote control power switch:
Tá scáileán taispeána an chianrialtáin curtha ar siúl.
⑦ small motor turning switch:
Ag baint úsáide as lasc athshocraithe 3-luas, nuair a oibrítear de láimh, is féidir an mótar beag a rialú chun casadh ar chlé nó ar dheis. Nuair a scaoileadh, the remote control will automatically stop this action.When in the forward state, turn this switch and the corresponding display will appear on the screen.The + arrow indicates left turn, agus an – arrow indicates right turn.When in reverse mode, turn this switch and the corresponding display will appear on the screen.The + arrow indicates left turn, agus an – arrow indicates right turn.Press and hold the enable button, then turn this switch to perform a stationary turning function, making the turn faster.
⑧ Rialachán luas mótair mhóra:
Ag baint úsáide as knob ionchódóra cas il, rotate the knob to adjust the speed S1 of the large motor For every 1 grid rotation, athraíonn luach luas an mhótair mhóir thart ar 0.2 aonaid, and rapid rotation can quickly modify the speed value of the large motor.
9 Small motor speed regulation (linear correction):To use the multi turn encoder knob, i mód láimhe, for every 1 turn of the knob, the speed value of the small motor changes by approximately 0.1 aonaid. Fast rotation can quickly modify the speed value of the small motor.
I mód uathoibríoch, press the enable button and rotate 1 greille gach uair. The speed limit value F of the small motor changes by approximately 0.1 aonaid. Rapid rotation can quickly modify the speed limit value of the small motor.Press the enable button, turn the knob to the right, and the straight line correction display shows D f: ciotóg. Each rotation of the knob increases by 1 aonad; Cas ar chlé, taispeáint ceartúcháin líne dhíreach: Df: Ar an gceart. Each rotation of the knob increases by 1 aonad, and each correction unit corresponds to a motor speed control AVI voltage of about 0.02 V.
5. Léaráid táirge cúlpháirtí
6. Treoir Suiteála Táirgí
6.1 Céimeanna Suiteála Táirgí
1. Install the receiver in the electrical cabinet through the buckle on the back, or install it in the electrical cabinet through the screw holes at the four corners of the receiver.
2. Déan tagairt dár léaráid sreangaithe glacadóra, compare your on-site equipment, and connect the equipment to the receiver through wires.
3. Tar éis don ghlacadóir a bheith socraithe, Caithfear an t -aeróg atá feistithe leis an nglacadóir a nascadh, agus caithfear ceann seachtrach an antenna a shuiteáil nó a chur lasmuigh den chomh -aireacht leictreach. Moltar é a chur ar bharr na comh -aireachta leictreachais don éifeacht comhartha is fearr. It is forbidden to leave the antenna unconnected or place the antenna inside the electrical cabinet, which may cause poor signal and unusable.
4. Mar fhocal scoir, install the battery in the remote control, níos doichte an clúdach ceallraí, and then turn on the power switch of the remote control. After the remote control display shows the normal working interface, you can perform remote control operation.
6.2 Toisí suiteála glacadóra
6.3 Léaráid tagartha sreangaithe glacadóra
7. Treoracha oibriúcháin an táirge
7.1 Socruithe Paraiméadar Cianrialú
How to enter the background parameters of the remote controller: turn the mode switch to manual mode, luas an mhótair bhig a choigeartú go 25, nó 0, 10, 20, 40, 50, and turn the forward switch of the large motor upwards 3 times and downwards 3 amanna;
Bain úsáid as an “Rialú Luas Mhótair Beag” knob to turn the page, press Enable and turn the small motor speed control knob to modify the parameters; after modification, cas an leathanach go dtí an deireadh, select Save and Exit, and press the Enable button to exit the menu;
Is iad seo a leanas na paraiméadair:Uasmhéid reatha: large motor current feedback value range, setting range 15-200A, mainneachtain 60;
Paraiméadair rialaithe luais: automatic mode small motor automatic acceleration speed, dá lú an níos tapúla, setting range 200-1500, mainneachtain 1000;
Paraiméadar luasmhoillithe: Set the upper limit of the motor speed change allowed. Nuair a athraíonn an sruth thar an luach seo, it will decelerate. The smaller it is, the faster the left and right motors will decelerate. The range is 05-12, and the default is 06;
Luasghéarú A1: The larger the value, the faster the motor speed increases, range 00-06,default 01; Luasmhoilliú A2: The larger the value, the faster the motor speed decreases, raon 00-06, mainneachtain 02;
Cumasaigh rialáil luais: Whether the small motor speed regulation needs to be enabled, 00 is not enabled, 01 is enabled, mainneachtain 01;
Startup self-locking: Whether the large motor will automatically keep self-locking after the forward and reverse switch is released, 00 is not maintained, 01 is maintained, mainneachtain 01;
Maximum travel: Maximum speed of the left and right motors, raon 10-100, mainneachtain 50;
Reatha a ghearradh: Maximum cutting current, the screen displays IC value, raon 15-160, mainneachtain 30, the screen displays IC: 30. The upper limit of this parameter = maximum current x 80%;
Teorainn luais réamhshocraithe: The default small motor automatic cutting speed at startup, raon 00-100, mainneachtain 10, the screen displays F1.0, this parameter is only accurate when the maximum travel is set to 50.
Wireless channel: Default is 10. When the remote control signal is unstable or there is signal interference on site, you can modify this parameter to switch channels to avoid interference;
Teorainn luais a fhritháireamh: The upper limit of the automatic cutting speed of the small motor,raon 00-200, mainneachtain 60, the screen displays 6.0; Display value upper limit = speed limit offset × 0.1;
Óstach uasta: The maximum speed of the large motor, raon 10-100, mainneachtain 50;
Mbus device ( éigeantach ): large motor inverter model selection, raon 00-03, mainneachtain 03;
00- Shanghai Xielin 01 fui
02- INVT 03 Inovance（Zhongchen, Robicon）
Trealamh SBUS (éigeantach): Roghnú múnla tiontaire minicíochta mótair bheaga, raon 00-05, mainneachtain 03;
00- Shanghai Xielin 01 fui
02- INVT 03 Inovance（Zhongchen, Robicon）
04-Anchuanda 05-Níl
8. Fabhtcheartú táirgí
7.2 Socrú paraiméadar an tiontaire minicíochta
1. Roghnú foinse ordú: Cainéal ordú cumarsáide
2. Roghnú príomhfhoinse minicíochta: cumarsáid tugtha
3. Ráta Baud: 19200
4. Formáid sonraí: Gan fíorú, formáid sonraí<8-N-1>
5. Seoladh áitiúil: Socraigh an tiontaire minicíochta ar chlé go 1, an tiontaire minicíochta ceart go 2, and the large motor frequency converter to 3
7.3 Treoracha le haghaidh Oibriúcháin Cianrialú
1. Cumhacht ar an meaisín, cas ar an gcianrialtán, enter the remote control background, set the remote control background parameters, mainlyIt is to set the models of small and large motor frequency converters (skip this step if the machine manufacturer has already set them);
2. Socraigh paraiméadair an tiontaire minicíochta (skip an chéim seo má tá monaróir an mheaisín socraithe cheana féin);
3. Socraigh an cianrialtán go mód láimhe, and then use the remote control to move the machine to the working position;
4. I mód láimhe, set the IC value for the cutting current of the large motor and the speed of the large motor;
5. Athraigh go mód uathoibríoch agus socraigh an luasteorainn gearrtha luach F don mhótar beag;
6. I mód uathoibríoch, cas an t-athrú mótair mór ar aghaidh chun an mótar mór a thosú, and then turn the small motor switch to forward or reverse. The remote control enters automatic cutting mode and begins cutting.
9.Cothabháil
1. Bain úsáid as i dtimpeallacht thirim ag teocht an tseomra agus brú chun a shaol seirbhíse a leathnú.
2. Seachain úsáid i dtimpeallachtaí neamhghnácha ar nós boilgeoga báistí agus uisce chun saol na seirbhíse a leathnú.
3. Coinnigh an urrann ceallraí agus an limistéar shrapnel miotail glan le do thoil.
4. Le do thoil, seachain dochar a dhéanamh don chianrialtán mar gheall ar fháscadh agus titim.
5. Mura n -úsáidtear é ar feadh i bhfad, please remove the battery and store the remote control and battery in a clean and safe place.
6.Le linn stórála agus iompair, Ba chóir aird a thabhairt ar thaise agus ar fhriotaíocht turraing.
10. Faisnéis sábháilteachta
1. Léigh na treoracha go cúramach le do thoil sula n -úsáidtear iad agus toirmeasc ar neamh -ghairmithe ó oibriú.
2. Please replace the battery in a timely manner when the battery is too low to avoid errors caused by insufficient power, rud a d'fhéadfadh nach mbeadh an cianrialtán in ann oibriú.
3. Má tá deisiú ag teastáil, Téigh i dteagmháil leis an monaróir le do thoil. Más é is cúis leis an damáiste féin deisiú, Ní sholáthróidh an monaróir barántas
