1. 12 ボタン, 6 of which support I/O signals.
2. Supports 2.8-inch color screen display.
3. Supports one 9-level axis selector switch, supporting up to 6-axis output.
4. Supports one 3-level multiplier switch.
3D 5 軸レーザー切断用ワイヤレスリモコン：PHB06B-レーザー
説明
1.製品の紹介
The PHB06B-Laser enables wireless remote control operation of the CNC system via the Modbus TCP protocol, サポートします 12 ボタン, and supports real-time display of system coordinates and status.
2.製品機能
1. 12 ボタン, 6 of which support I/O signals.
2. Supports 2.8-inch color screen display.
3. Supports one 9-level axis selector switch, supporting up to 6-axis output.
4. Supports one 3-level multiplier switch.
5. Supports one electronic remote control, 100 pulses/revolution.
6. Supports receiver Ethernet interface, Modbus TCP communication.
7. Supports standard Type-C charging, 5V-2A充電仕様, built-in battery specifications 18650/12775mWh.
3.動作原理
PHB06B-Laser is connected to the user’s system via an Ethernet interface. It performs data interaction through the Modbus TCP protocol. The user system acts as the Modbus master station, which can transmit real-time system display coordinates and read information such as keys and axis selection of the PHB06B-Laser remote control, so as to realize real-time data communication.
注記: For the specific protocol, please refer to the “3D 5-axis Laser Cutting – PHB06B – Laser – Modbus Protocol Description”.
4.製品仕様
| 受信機電源電圧 | DC5V-DC24V |
| Button lifespan | 1,000,000 時代 |
| Operating Temperature |
-25℃ < × < 55℃
|
| Safe drop height | 1 m |
| Receiver port | イーサネット |
| Number of buttons |
12
|
| 表示画面 |
2.8-inch color screen
|
| wireless communication frequency | 433MHz band |
| Receiver sensitivity |
-100dBm
|
| Handheld transmit power |
15dBm
|
| 無線通信距離 | 100 meters barrier-free range |
| Rechargeable Battery Specification | Rechargeable Battery Specification |
| Charging base power supply voltage | DC24V/1A |
|
Wired Charging Specification
|
Type-C charging port, DC 5V/2A |
5.製品機能紹介
メモ:
① Power Switch
Used to turn the remote control on and off.
② Enable buttons on both sides
The enable button must be pressed while holding the remote control.
③Button area
12 ボタン
④ Axis Selection and Magnification Switch
One 9-gear axis selection switch; one 3-gear magnification switch.
⑤ Emergency Stop Switch
Remote control emergency stop switch.
⑥ Display Screen Area
It can display coordinates, status and other information.
⑦ Electronic Pulse Encoder
One electronic pulse encoder with 100 1回転あたりのパルス数.
⑧ Type-C Charging Port
It is used for connection between the charger and the remote control.
The handheld display includes a coordinate interface and a 6-point acquisition interface, which can be switched by pressing the ‘Next Page’ key
6. Product Accessories Diagram
7. Receiver and Wiring Ports
8. Configure network access
9. Test Instructions
10. Installation dimensions
受信機のインストール寸法
ユニット: millimeters
Thickness: 29.6mm
11.Maintenance and upkeep
1. 室温と圧力の乾燥環境でそれを使用して、そのサービス寿命を延ばしてください.
2. Do not use sharp objects to contact the button area to extend button life.
3. Please keep the appearance of the remote control clean to extend its service life.
4. Please avoid crushing, dropping, or bumping, 等. to prevent damage to the precision components
5. Avoid moisture and shock during storage and transportation.
12.安全情報
1. 使用する前に指示を注意深く読んで、非専門家が運営を禁止してください.
2. If you repair it yourself and cause damage, the warranty will be void.
