£500.00
Adopt 433MHZ wireless communication technology, wireless operation distance is 80 メートル;
サポート 6 カスタムボタン, IO信号出力を切り替えます;
Support 6-axis control, 7-12 axis control can be customized;
Supports 1X,10バツ, 100X control and can be maximum customizable 1000X;
1.製品の紹介
Wireless electronic handwheel is used for manual guidance, ポジショニング, tool setting and
other operations of CNC machine tools. この製品は、ワイヤレス送信テクノロジーを採用しています,
eliminating the traditional spring wire connection, ケーブルによって引き起こされる機器の故障の削減,
eliminating the disadvantages of cable dragging, oil stains, 等, and is more convenient to
operate. It is widely used in CNC machine tools such as gantry machining centers, gantry
vertical lathes, CNC gear processing machines, and can be adapted to a variety of CNC
systems on the market, シーメンスなど, シーメンスに適用可能, ファナック, syntec and other CNC system
brands.
2.製品の特徴
1. Adopt 433MHZ wireless communication technology, wireless operation distance is 80 メートル;
2. Adopt automatic frequency hopping function, ウェブサイトを迅速に構築するには 32 sets of wireless remote controllers at the
same time without affecting each other;
3. 緊急停止ボタンをサポートします, and after the handwheel is turned off, the emergency stop
button is still valid;
4. サポート 6 カスタムボタン, IO信号出力を切り替えます;
5. Support 6-axis control, 7-12 axis control can be customized;
6. Supports 1X,10バツ, 100X control and can be maximum customizable 1000X;
7. Supports the enable button function, output switch l0 sianals. 軸の選択,maanification
and encoder.;
8. Support axis selection and magnification selection encoder output;
9. 標準タイプC充電をサポートします, 5V-2A充電仕様, built-in battery specification
14500/1100mAh.
3.製品仕様
4.製品機能の紹介
メモ：
①Emergency stop button：
When the emergency stop button is pressed, the two emergency stop IO outputs on
the receiver are disconnected, and all handwheel functions are invalid. When the emergency
stop is released, the emergency stop IO output on the receiver is closed, and all handwheel
functions are restored; and after the handwheel is turned off, the emergency stop IO output
of the receiver is still valid when the emergency stop button is pressed.
②Enable button:
Press any one of the enable buttons on both sides, and the two groups of enable IO
outputs on the receiver will be turned on. Release the enable button and the enable IO
output will be turned off. 加えて, you need to press and hold the enable button before
switching the axis selection ratio and shaking the handwheel. This function can be
canceled through the configuration software.
③Axis selection switch (電源スイッチ):
Press and hold the enable button and switch the axis selection switch to switch the
moving axis controlled by the handwheel. Switch this switch from OFF to any axis and
turn on the handwheel power.
④Pulse encoder:
Press and hold the enable button and shake the pulse encoder to send out a pulse
signal to control the movement of the machine axis.
⑤Battery indicator:
The hand wheel power display, all bright means full power, all off means it is not
turned on or has no power, the first left grid flashes, indicating that the power is too low,
please charge in time.
⑥Signal Lights:
If the signal light is on, it means the handwheel is being operated and the signal is
normal; if the signal light is off, it means there is no operation, or it is being operated but
the wireless signal is not connected.
5.製品アクセサリー図
6.製品インストールガイド
6.1 Product Installation Steps
1. Install the receiver in the electrical cabinet using the clips on the back, or install it in
the electrical cabinet using the screw holes at the four corners of the receiver.
2.Refer to our receiver wiring diagram, compare it with your on-site equipment, and connect
the equipment to the receiver via cables.
3.After the receiver is fixed, 受信機を装備したアンテナを接続する必要があります,
and the outer end of the antenna must be installed or placed outside the electrical cabinet. It
is recommended to place it on the top of the electrical cabinet for the best signal effect. It is
forbidden to leave the antenna unconnected or place the antenna inside the electrical cabinet,
which may cause the signal to be unusable.
4. ついに, turn on the handwheel power switch and you can operate the machine by
handwheel remote control.
6.2 受信機のインストール寸法
6.3 レシーバー配線参照図
7.製品操作の指示
1. The machine is powered on, the receiver is powered on, the receiver working indicator
light flashes, the wireless electronic handwheel has the battery installed, the battery cover
is fastened, the wireless electronic handwheel power switch is turned on, and the
handwheel power light is on;
2. 座標軸を選択します: [イネーブル]ボタンを押し続けます, switch the axis selection
switch, and select the axis you want to operate on;
3. 倍率を選択します: [イネーブル]ボタンを押し続けます, switch the magnification switch,
and select the magnification level you need;
4. 移動軸: [イネーブル]ボタンを押し続けます, 軸選択スイッチを選択します, select
the magnification switch, and then rotatethe pulse encoder to rotate the positive moving axis
clockwise and the negative moving axis counterclockwise;
5. カスタムボタンを押し続けます, and the corresponding button IO output of the
receiver will be turned on. Release the button to turn off the output;
6. 緊急停止ボタンを押します, the corresponding emergency stop IO output of the
receiver is disconnected, the handwheel function is disabled, release the emergency stop
ボタン, the emergency stop IO output is closed, and the handwheel function is restored;
7. ハンドホイールが一定期間動作していない場合, it will automatically enter sleep
mode to reduce power consumption. それが再び使用されるとき, the handwheel can be
activated by pressing the enable button;
8. ハンドホイールが長い間使用されていない場合,it is recommended to switch the handwheel
shaft to the OFF position, ハンドホイールの電源をオフにします, バッテリーの寿命を延ばします.
8.製品モデルの説明
① ：DWGP represents the appearance style
② ：パルス出力パラメーター:
01: Indicates that the pulse output signals are A and B, and the pulse voltage is 5V; 脈動
quantity 100PPR;
02: Indicates that the pulse output signals are A and B, and the pulse voltage is 12V; 脈動
quantity 25PPR;
03: Indicates that the pulse output signal is A B、A-、B-； パルス電圧5V; Pulse quantity 1
00PPR;
04: 低レベルのNPN開回路出力を示します, aおよびbのパルス出力信号付き; の
number of pulses is 100PPR;05: 高レベルのPNPソース出力を示します, pulse output signals
are A and B; pulse quantity is 100PPR;
③ : represents the number of axis selection switches, 6 表現します 6 軸, 7 表現します 7 軸.
④ : represents the type of axis selection switch signal, Aは、ポイントツーポイント出力信号を表します,
B represents encoded output signal;
⑤ : represents the type of magnification switch signal,
Aは、ポイントツーポイント出力信号を表します, B represents encoded output signal;
⑥ : represents the number of custom buttons, 6 表現します 6 カスタムボタン;
⑦ : represents the power supply for the system handwheel, 05 5V電源を表します,
と 24 represents 24V power supply.
9.製品のトラブルシューティング
10. メンテナンスとケア
1. 室温と圧力の乾燥環境でそれを使用して、そのサービス寿命を延ばしてください;
2. 雨や水の泡などの異常な環境で使用して、サービスの寿命を延ばしないでください;
3. 携帯電話の外観をきれいに保ち、そのサービス寿命を延ばしてください;
4. 圧迫は避けてください, 落ちる, ぶつかる, 等. to prevent damage to the precision components inside
the handwheel or accuracy errors;
5. 長い間使用されていない場合, ハンドホイールを清潔で安全な場所に保管してください;
6.貯蔵および輸送中, 水分と衝撃耐性に注意を払う必要があります.
11.安全情報
1. 使用する前に指示を注意深く読んで、非専門家が運営を禁止してください;
2. When the battery level is too low, please charge it in time to avoid errors caused by insufficient
battery and inability to operate the handwheel;
3. 修理が必要な場合, メーカーに連絡してください. 損傷が自己修復によって引き起こされる場合, メーカーは保証を提供しません.
