Program remot control nirkabel cnc phb10

Katrangan

1.Pambuka Produk

The programmable CNC remote control PHB10 is suitable for wireless
Operasi kontrol remot saka macem-macem sistem CNC. It supports user-defined
programming to develop button functions, and realize remote control of various
functions on the CNC system; it supports user-defined programming to develop
LED lights to light up and turn off, and realize dynamic display of system status;
the remote control comes with a rechargeable battery and supports Type-C
interface charging.

2.Fitur Produk

1. Nggunakake teknologi komunikasi nirkabel 433MHZ, Operasi nirkabel
Jarak iku 80 meter;
2.Nggunakake fungsi hopping frekuensi otomatis, 32 nyetel remot nirkabel
pengontrol bisa digunakake ing wektu sing padha tanpa mengaruhi;
3.Dhukungan 32 Programming Tombol Custom;
4.Dhukungan 9 custom LED light display programming;
5.Support IP67 waterproof level;
6.Support standard Type-C interface charging; 5Spesifikasi V-2A Ngisi daya;
1100 mAh large capacity battery, with automatic sleep standby function; realize
ultra-long low power standby;
7.Support real-time display of power.

3.Prinsip kerja

4. Spesifikasi Produk

5.Introduksi fungsi produk

Cathetan：
①Battery level display：
Lights up after power on, turns off after power off;
If the battery indicator light is only one bar and keeps flashing, it means the
battery is too low. Please replace the battery;

If the battery indicator lights are all on and the other LED lights flash back and
forth, it means the battery is very low. Please replace the battery;
If the battery indicator does not light up or go out, and the device cannot be
started by pressing and holding the power button, Mangga ngganti baterei;

②Button area：32 buttons arranged in 4X8, Programming sing ditetepake pangguna;

③Status LED：
COMMU: Button indicator light, lights up when the button is pressed and goes
out when the button is released; other lights are custom displays;

④Power switch：
Long press for 3 seconds to turn on, long press for 3 seconds to turn off;
⑤Charging port：
Use Type-C charger to charge, Ngisi daya voltase 5V, 1A-2A-2A; charging
time 3-5 jam;

When charging, the power indicator flashes, indicating that it is charging. When
fully charged, the power indicator will show full bar without flashing.

6.Diagram aksesoris produk

7.Pandhuan instalasi Produk

1 . I nsert the USB receiver into the computer, komputer bakal kanthi otomatis
recognize and install the USB device driver without manual
2. Lebokake kontrol remot menyang pangisi daya. Sawise baterei wis kebak, press
and hold the power button for 3 seconds. The remote control will turn on and the power
indicator will light up, indicating that the power-on is successful.
3. Sawise kuwasa ing, Sampeyan bisa nindakake operasi tombol apa wae. The remote control
can support dual button operation at the same time. Yen sampeyan menet tombol apa wae, The
COMMU light on the remote control will light up, indicating that this button is valid.

8.Pandhuan operasi produk
Sadurunge pangembangan produk lan panggunaan, you can use the demo software we provide to
test the buttons on the remote control and the LED light on the remote control. You can
also use the demo as a reference routine for future programming development.
Sadurunge nggunakake Software demo, mangga tarik panampa USB menyang komputer,
make sure the remote controller has sufficient power, press and hold the power button to t
urn it on, banjur gunakake;
Yen ana tombol ing remot kontrol dipencet, the test software demo will display
the corresponding key value. Sawise ngeculake, Tampilan nilai kunci ilang,
indicating that the key upload is normal;
You can also select the LED light number on the test software demo, click download,
and the corresponding light number on the remote control will light up, indicating that the
LED light is downloading normally.

9.Ngatasi masalah produk

10. Pangopènan lan perawatan

1. Mangga nggunakake ing lingkungan garing kanthi suhu normal lan tekanan kanggo ngluwihi
layanan layanan;
2. Aja nggunakake obyek sing cetha kanggo ndemek wilayah utama kanggo nglanjutake layanan ing kunci;
3. Mangga njaga area utama sing ngresiki kanggo nyuda pakaian kunci;
4. Aja nyepelekake lan tiba nyebabake karusakan ing remot kontrol;
5. Yen ora digunakake kanggo wektu sing suwe, please remove the battery and store the remote control
and battery in a clean and safe place;
6. Pay manungsa waé kanggo bukti kelembapan sajrone panyimpenan lan transportasi.

11.Informasi safety

1. Mangga maca pandhuan kanthi ati-ati sadurunge digunakake. Non-professionals are prohibited from
operating.
2. Please use the original charger or a charger produced by a regular manufacturer with the
same specifications.
3. Please charge in time to avoid incorrect operation due to insufficient power causing the
remote control to be unresponsive.
4. Yen ndandani dibutuhake, Hubungi pabrikan. If the damage is caused by self-repair,
Pabrikan ora bakal menehi garansi.