1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 metr.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, O'q tanlash, magnification, and other information.
3. Shoshilinch stop tugmasini qo'llab-quvvatlang, IO signal chiqishini yoqing, and the hand wheel shutdown emergency stop is still valid.
4. Qo'llab-quvvatlaydi 6 Shaxsiy tugmachalar, switch IO signals, and can output signals to the system through IO wiring or communication.
Simli elektron qo'lda turadigan qo'llanma qo'llanma
Tavsif
1. Mahsulotni tanishtirish
Electronic handwheel is used for manual guidance, joylashtirish, tool alignment, and other operations on CNC machine tools. This model of electronic handwheel is a Siemens actual display wired electronic handwheel. The handwheel is connected to the X130 interface of the Siemens system through a network cable, and the system coordinates are read and displayed on the LCD screen of the handwheel through S7 protocol communication. The handwheel can also control system axis selection, magnification, buttons, andother signals through communication.
2.Mahsulot funktsional xususiyatlari
1. Use a 6-core aviation plug cable for connection, with a handwheel cable length of 10 metr.
2. The handwheel screen can display system workpiece coordinates, mechanical coordinates,feed rate, O'q tanlash, magnification, and other information.
3. Shoshilinch stop tugmasini qo'llab-quvvatlang, IO signal chiqishini yoqing, and the hand wheel shutdown emergency stop is still valid.
4. Qo'llab-quvvatlaydi 6 Shaxsiy tugmachalar, switch IO signals, and can output signals to the system through IO wiring or communication.
5. Qo'llab-quvvatlaydi 6 yoki 8 o'qni boshqarish, with switch IO signals that can be output to the system through IO wiring or communication.
6. Qo'llab-quvvatlaydi 3 yoki 4 levels of magnification control, with switch IO signals that can be output to the system through IO wiring or communication.
7. Support pulse encoder, 100 pulses/turn, can output signals to the system through AB pulse wiring.
8. Supports Siemens S7 protocol and Siemens 828D, 840DSL, ONE and other model systems.
3. Mahsulot xususiyatlari
| Handwheel working power supply voltage | DC24V/1A |
| Qabul qiluvchi elektr energiyasini etkazib berish | DC24V/1A |
| Receiver IO output load range | DC24V |
| Hand wheel end cable length | 10shodlik |
| Receiver end cable length | 1shodlik |
| Receiver end network cable length | 3shodlik |
| Operating temperature | -25Shum<X<55Shum |
| Anti-fall height | 1shodlik |
| Custom Button Quantity | 6 |
| Product dimensions | 233*90.7*77.4（mm） |
4.Mahsulot funktsiyasi Kirish
Eslatma:
Emergency stop button:
Shoshilinch STOP tugmasini bosing, Qabul qilgichda ikkita favqulodda vaziyatning ikkinchi to'plamlari uziladi, va qo'lvalchaning barcha funktsiyalari yaroqsiz bo'ladi.
After releasing the emergency stop, Qabul qilgichda IO chiqishini to'xtating, and all functions of the handwheel are restored.
② Screen display:
PLC: 0000 indicates that the network cable is not connected, PLC: 1010 indicates that the network cable is successfully connected to the PLC system.
PLC: 1110 represents successful writing of system data to the handwheel, PLC: 0001 represents successful connection to the computer.
③ Custom button:
6 Shaxsiy tugmachalar, qabul qilgichda IO chiqish nuqtasiga mos keladigan har biri, also connected to the system through communication.
④ Axis selection switch:
The axis selection switch can switch the movement axis controlled by the handwheel.
⑤ Enable button:
Press and hold either enable button on both sides to activate the pulse encoder by shaking it. And the two groups on the receiver enable IO output to conduct, release the enable button to enable IO output to disconnect.
⑥ Magnification switch:The magnification switch can switch the magnification
controlled by the handwheel.
⑦ Pulse encoder:
Yoqish tugmachasini bosing va ushlab turing, Puls kodini silkit, puls signalini chiqaradi, and control the movement of the machine axis.
⑧ Handwheel cable:
Cable connecting the handwheel and receiver, aviation plug, used for handwheel power supply and communication.
5. Mahsulotning qo'shimcha diagrammasi
6. Mahsulotni o'rnatish bo'yicha qo'llanma
6.1 Mahsulotni o'rnatish bosqichlari
6.1 Mahsulotni o'rnatish bosqichlari
1. Install the receiver into the electrical cabinet through the screw holes at the four corners.
2. Qabul qiluvchiimiz sigrammasiga murojaat qiling va uni saytdagi uskunalar bilan taqqoslang. Connect the device to the receiver through cables and connect the receiver to the X130 interface of the system using Ethernet cables.
3. Qabul qilgichni tuzatgandan so'ng, install the aviation plug base at the handwheel opening position on the panel, and plug the other end of the base into the handwheel interface on the receiver. Then insert the aviation plug of the handwheel cable into the base and tighten the fixing device.
6.2 Qabul qiluvchilarni o'rnatish o'lchamlari
6.3 Installation dimensions of aviation plugs
6.4 Qabul qiluvchining sxemasi
7.Mahsulotni ishlatish bo'yicha ko'rsatmalar
7.Mahsulotni ishlatish bo'yicha ko'rsatmalar
1. When the receiver is powered on and the working indicator light of the receiver flashes, connect the receiver to the computer with a network cable, set the fixed IP address of the computer, and use the network configuration tool software to set the network parameters of the handwheel function. For specific setting methods, refer to the “LXWGP-ETS Wired Handwheel User Manual”.
2.After the receiver is set up, the system needs to program a PLC program. Please refer to the “LXWGP-ETS Different Siemens Numerical Control System Setting Methods” and PLC program routine materials for details.
3.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X130 interface of the system.Connect the receiver power supply and pulse line.3.
4.After completing the above settings, take the receiver to the machine electrical cabinet and install it. Pull out the network cable from the computer and plug it into the X interface of the system. Connect the receiver power supply and pulse line.
5. Select axis selection: Switch the axis selection switch and select the axis you want to operate on.
6. Kattalashtirish-ni tanlang: Switch the magnification switch and select the magnification level you need.
7. Harakatlanuvchi o'q: Yoqish tugmachasini bosing va ushlab turing, O'q tanlash tugmasini tanlang, Kattalashtirish tugmachasini tanlang, and then rotate the pulse encoder to rotate the positive moving axis clockwise and the negative moving axis counterclockwise.
8. Press and hold any custom button to turn on the IO output of the corresponding button in the receiver, and release the button to turn off the output.
9. Shoshilinch STOP tugmasini bosing, Qabul qilgichning chiqishi bo'yicha tegishli favqulodda vaziyat o'chiriladi, Qo'ldaval funktsiyasi o'chiriladi, Favqulodda vaziyatni o'chirish tugmasini bo'shating, IO chiqish uchun favqulodda vaziyat yopiq bo'ladi, va qo'lda oladigan funktsiyasi tiklanadi.
8.Mahsulot model tavsifi
① LXWGP represents a wired appearance style, and the receiver communication interface
is an Ethernet interface.
Shum : Represents Siemens system specific.
Shum : o'qni tanlash tugmachalari sonini anglatadi, represents axes, and represents
o'q.
Shum : represents the type of axis selection and magnification signal, A represents
point-to-point output signal, va B kodlangan chiqish signalini anglatadi.
9.Product trouble shooting
10.Parvarishlash
1. Iltimos, uni quruq muhitda xona haroratida va uning xizmat ko'rsatish muddatini uzaytirish uchun bosimni ishlating.
2. Iltimos, xizmat va suv pufakchalari kabi g'ayritabiiy muhitda, masalan, xizmatdagi hayotni kengaytirishdan saqlaning.
3. Iltimos, xizmat hayotini uzaytirish uchun qo'lingizni tozalang.
4. Iltimos, siqilishdan saqlaning, yiqilish, urish, va hokazo. Qo'lda yoki aniqlikdagi xatolar ichidagi aniq tarkibiy qismlarga zarar etkazmaslik uchun.
5. Agar uzoq vaqt ishlatilmasa, please store the handwheel in a clean and safe place.During storage and transportation, Diqqat namlash va zarbalarga chidamliligiga to'lanishi kerak.
11. Xavfsizlik haqida ma'lumot
1. Iltimos, professional bo'lmaganlardan foydalanishdan oldin ko'rsatmalar bilan diqqat bilan o'qing.
2. If any abnormal situation occurs with the handwheel, please stop using it immediately and troubleshoot. Before troubleshooting, it is forbidden to use the faulty handwheel again to avoid safety accidents caused by unknown handwheel faults;
3. Agar ta'mirlash talab qilinsa, Iltimos, ishlab chiqaruvchi bilan bog'laning. Agar zarar o'z-o'zini ta'mirlash natijasida yuzaga kelsa, Ishlab chiqaruvchi kafolat bermaydi
